From: Zhangfei Gao <zhangfei.gao-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
To: mark.rutland-5wv7dgnIgG8@public.gmane.org,
dinh.linux-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
haojian.zhuang-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
haifeng.yan-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
jchxue-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
xuwei5-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Zhangfei Gao
<zhangfei.gao-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
Jiancheng Xue
<xuejiancheng-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
Subject: [PATCH v3 5/6] ARM: dts: hix5hd2: add gpio node
Date: Sat, 30 Aug 2014 12:15:41 +0800 [thread overview]
Message-ID: <1409372142-5960-6-git-send-email-zhangfei.gao@linaro.org> (raw)
In-Reply-To: <1409372142-5960-1-git-send-email-zhangfei.gao-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Signed-off-by: Jiancheng Xue <xuejiancheng-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
Signed-off-by: Zhangfei Gao <zhangfei.gao-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
---
arch/arm/boot/dts/hisi-x5hd2.dtsi | 234 +++++++++++++++++++++++++++++++++++++
1 file changed, 234 insertions(+)
diff --git a/arch/arm/boot/dts/hisi-x5hd2.dtsi b/arch/arm/boot/dts/hisi-x5hd2.dtsi
index 18f52f0..152f3ad 100644
--- a/arch/arm/boot/dts/hisi-x5hd2.dtsi
+++ b/arch/arm/boot/dts/hisi-x5hd2.dtsi
@@ -131,6 +131,240 @@
clock-names = "apb_pclk";
status = "disabled";
};
+
+ gpio0: gpio@b20000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xb20000 0x1000>;
+ interrupts = <0 108 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ clocks = <&clock HIX5HD2_FIXED_100M>;
+ clock-names = "apb_pclk";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ status = "disabled";
+ };
+
+ gpio1: gpio@b21000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xb21000 0x1000>;
+ interrupts = <0 109 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ clocks = <&clock HIX5HD2_FIXED_100M>;
+ clock-names = "apb_pclk";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ status = "disabled";
+ };
+
+ gpio2: gpio@b22000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xb22000 0x1000>;
+ interrupts = <0 110 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ clocks = <&clock HIX5HD2_FIXED_100M>;
+ clock-names = "apb_pclk";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ status = "disabled";
+ };
+
+ gpio3: gpio@b23000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xb23000 0x1000>;
+ interrupts = <0 111 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ clocks = <&clock HIX5HD2_FIXED_100M>;
+ clock-names = "apb_pclk";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ status = "disabled";
+ };
+
+ gpio4: gpio@b24000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xb24000 0x1000>;
+ interrupts = <0 112 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ clocks = <&clock HIX5HD2_FIXED_100M>;
+ clock-names = "apb_pclk";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ status = "disabled";
+ };
+
+ gpio5: gpio@004000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x004000 0x1000>;
+ interrupts = <0 113 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ clocks = <&clock HIX5HD2_FIXED_100M>;
+ clock-names = "apb_pclk";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ status = "disabled";
+ };
+
+ gpio6: gpio@b26000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xb26000 0x1000>;
+ interrupts = <0 114 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ clocks = <&clock HIX5HD2_FIXED_100M>;
+ clock-names = "apb_pclk";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ status = "disabled";
+ };
+
+ gpio7: gpio@b27000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xb27000 0x1000>;
+ interrupts = <0 115 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ clocks = <&clock HIX5HD2_FIXED_100M>;
+ clock-names = "apb_pclk";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ status = "disabled";
+ };
+
+ gpio8: gpio@b28000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xb28000 0x1000>;
+ interrupts = <0 116 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ clocks = <&clock HIX5HD2_FIXED_100M>;
+ clock-names = "apb_pclk";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ status = "disabled";
+ };
+
+ gpio9: gpio@b29000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xb29000 0x1000>;
+ interrupts = <0 117 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ clocks = <&clock HIX5HD2_FIXED_100M>;
+ clock-names = "apb_pclk";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ status = "disabled";
+ };
+
+ gpio10: gpio@b2a000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xb2a000 0x1000>;
+ interrupts = <0 118 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ clocks = <&clock HIX5HD2_FIXED_100M>;
+ clock-names = "apb_pclk";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ status = "disabled";
+ };
+
+ gpio11: gpio@b2b000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xb2b000 0x1000>;
+ interrupts = <0 119 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ clocks = <&clock HIX5HD2_FIXED_100M>;
+ clock-names = "apb_pclk";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ status = "disabled";
+ };
+
+ gpio12: gpio@b2c000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xb2c000 0x1000>;
+ interrupts = <0 120 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ clocks = <&clock HIX5HD2_FIXED_100M>;
+ clock-names = "apb_pclk";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ status = "disabled";
+ };
+
+ gpio13: gpio@b2d000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xb2d000 0x1000>;
+ interrupts = <0 121 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ clocks = <&clock HIX5HD2_FIXED_100M>;
+ clock-names = "apb_pclk";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ status = "disabled";
+ };
+
+ gpio14: gpio@b2e000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xb2e000 0x1000>;
+ interrupts = <0 122 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ clocks = <&clock HIX5HD2_FIXED_100M>;
+ clock-names = "apb_pclk";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ status = "disabled";
+ };
+
+ gpio15: gpio@b2f000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xb2f000 0x1000>;
+ interrupts = <0 123 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ clocks = <&clock HIX5HD2_FIXED_100M>;
+ clock-names = "apb_pclk";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ status = "disabled";
+ };
+
+ gpio16: gpio@b30000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xb30000 0x1000>;
+ interrupts = <0 124 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ clocks = <&clock HIX5HD2_FIXED_100M>;
+ clock-names = "apb_pclk";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ status = "disabled";
+ };
+
+ gpio17: gpio@b31000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xb31000 0x1000>;
+ interrupts = <0 125 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ clocks = <&clock HIX5HD2_FIXED_100M>;
+ clock-names = "apb_pclk";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ status = "disabled";
+ };
};
local_timer@00a00600 {
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2014-08-30 4:15 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-30 4:15 [PATCH v3 0/6] hix5hd2 add some nodes Zhangfei Gao
[not found] ` <1409372142-5960-1-git-send-email-zhangfei.gao-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2014-08-30 4:15 ` [PATCH v3 1/6] ARM: dts: hix5hd2: add gmac node Zhangfei Gao
2014-08-30 4:15 ` [PATCH v3 2/6] ARM: dts: hix5hd2: add mmc node Zhangfei Gao
2014-08-30 4:15 ` [PATCH v3 3/6] ARM: dts: hix5hd2: add usb node Zhangfei Gao
2014-08-30 4:15 ` [PATCH v3 4/6] ARM: dts: hix5hd2: add sata node Zhangfei Gao
2014-08-30 4:15 ` Zhangfei Gao [this message]
2014-08-30 4:15 ` [PATCH v3 6/6] ARM: dts: hix5hd2: add wdg node Zhangfei Gao
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1409372142-5960-6-git-send-email-zhangfei.gao@linaro.org \
--to=zhangfei.gao-qsej5fyqhm4dnm+yrofe0a@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=dinh.linux-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=haifeng.yan-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=haojian.zhuang-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=jchxue-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=xuejiancheng-hv44wF8Li93QT0dZR+AlfA@public.gmane.org \
--cc=xuwei5-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).