From: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
To: linux-arm-kernel@lists.infradead.org
Cc: naveenkrishna.ch@gmail.com, linux-samsung-soc@vger.kernel.org,
catalin.marinas@arm.com, robh@kernel.org,
devicetree@vger.kernel.org, t.figa@samsung.com,
kgene.kim@samsung.com
Subject: [PATCH v2 5/7] arm64: dts: Add initial device tree support for EXYNOS7
Date: Tue, 02 Sep 2014 21:05:41 +0530 [thread overview]
Message-ID: <1409672143-8574-6-git-send-email-ch.naveen@samsung.com> (raw)
In-Reply-To: <1409672143-8574-1-git-send-email-ch.naveen@samsung.com>
Add initial device tree nodes for EXYNOS7 SoC and board dts file
to support Espresso board based on Exynos7 SoC.
Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
---
arch/arm64/boot/dts/Makefile | 1 +
arch/arm64/boot/dts/exynos/exynos7-espresso.dts | 31 +++++
arch/arm64/boot/dts/exynos/exynos7.dtsi | 168 +++++++++++++++++++++++
3 files changed, 200 insertions(+)
create mode 100644 arch/arm64/boot/dts/exynos/exynos7-espresso.dts
create mode 100644 arch/arm64/boot/dts/exynos/exynos7.dtsi
diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile
index c52bdb0..a3bc18a 100644
--- a/arch/arm64/boot/dts/Makefile
+++ b/arch/arm64/boot/dts/Makefile
@@ -1,3 +1,4 @@
+dtb-$(CONFIG_ARCH_EXYNOS7) += exynos/exynos7-espresso.dtb
dtb-$(CONFIG_ARCH_VEXPRESS) += rtsm_ve-aemv8a.dtb foundation-v8.dtb
dtb-$(CONFIG_ARCH_XGENE) += apm-mustang.dtb
diff --git a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
new file mode 100644
index 0000000..f6a8879
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
@@ -0,0 +1,31 @@
+/*
+ * SAMSUNG Exynos7 Espresso board device tree source
+ *
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+#include "exynos7.dtsi"
+
+/ {
+ model = "Samsung Exynos7 Espresso board based on EXYNOS7";
+ compatible = "samsung,exynos7-espresso", "samsung,exynos7";
+
+ chosen {
+ linux,stdout-path = &serial_2;
+ };
+
+ memory@40000000 {
+ device_type = "memory";
+ reg = <0x0 0x40000000 0x0 0xC0000000>;
+ };
+};
+
+&serial_2 {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi
new file mode 100644
index 0000000..e593af55
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi
@@ -0,0 +1,168 @@
+/*
+ * SAMSUNG EXYNOS7 SoC device tree source
+ *
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <dt-bindings/clock/exynos7-clk.h>
+
+/ {
+ compatible = "samsung,exynos7";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ aliases {
+ serial0 = &serial_0;
+ serial1 = &serial_1;
+ serial2 = &serial_2;
+ serial3 = &serial_3;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57", "arm,armv8";
+ enable-method = "psci";
+ reg = <0x0>;
+ };
+
+ cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57", "arm,armv8";
+ enable-method = "psci";
+ reg = <0x1>;
+ };
+
+ cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57", "arm,armv8";
+ enable-method = "psci";
+ reg = <0x2>;
+ };
+
+ cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57", "arm,armv8";
+ enable-method = "psci";
+ reg = <0x3>;
+ };
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ soc: soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0 0x18000000>;
+
+ chipid@10000000 {
+ compatible = "samsung,exynos4210-chipid";
+ reg = <0x10000000 0x100>;
+ };
+
+ fin_pll: xxti {
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ clock-output-names = "fin_pll";
+ #clock-cells = <0>;
+ };
+
+ gic: interrupt-controller@11001000 {
+ compatible = "arm,gic-400";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0x11001000 0x1000>,
+ <0x11002000 0x1000>,
+ <0x11004000 0x2000>,
+ <0x11006000 0x2000>;
+ };
+
+ clock_topc: clock-controller@10570000 {
+ compatible = "samsung,exynos7-clock-topc";
+ reg = <0x10570000 0x10000>;
+ #clock-cells = <1>;
+ };
+
+ clock_top0: clock-controller@105d0000 {
+ compatible = "samsung,exynos7-clock-top0";
+ reg = <0x105d0000 0xb000>;
+ #clock-cells = <1>;
+ };
+
+ clock_peric0: clock-controller@13610000 {
+ compatible = "samsung,exynos7-clock-peric0";
+ reg = <0x13610000 0xd00>;
+ #clock-cells = <1>;
+ };
+
+ clock_peric1: clock-controller@14C80000 {
+ compatible = "samsung,exynos7-clock-peric1";
+ reg = <0x14c80000 0xd00>;
+ #clock-cells = <1>;
+ };
+
+ clock_peris: clock-controller@10040000 {
+ compatible = "samsung,exynos7-clock-peris";
+ reg = <0x10040000 0xd00>;
+ #clock-cells = <1>;
+ };
+
+ serial_0: serial@13630000 {
+ compatible = "samsung,exynos4210-uart";
+ reg = <0x13630000 0x100>;
+ interrupts = <0 440 0>;
+ clocks = <&clock_peric0 PCLK_UART0>, <&clock_peric0 SCLK_UART0>;
+ clock-names = "uart", "clk_uart_baud0";
+ status = "disabled";
+ };
+
+ serial_1: serial@14c20000 {
+ compatible = "samsung,exynos4210-uart";
+ reg = <0x14c20000 0x100>;
+ interrupts = <0 456 0>;
+ clocks = <&clock_peric1 PCLK_UART1>, <&clock_peric1 SCLK_UART1>;
+ clock-names = "uart", "clk_uart_baud0";
+ status = "disabled";
+ };
+
+ serial_2: serial@14c30000 {
+ compatible = "samsung,exynos4210-uart";
+ reg = <0x14c30000 0x100>;
+ interrupts = <0 457 0>;
+ clocks = <&clock_peric1 PCLK_UART2>, <&clock_peric1 SCLK_UART2>;
+ clock-names = "uart", "clk_uart_baud0";
+ status = "disabled";
+ };
+
+ serial_3: serial@14c40000 {
+ compatible = "samsung,exynos4210-uart";
+ reg = <0x14c40000 0x100>;
+ interrupts = <0 458 0>;
+ clocks = <&clock_peric1 PCLK_UART3>, <&clock_peric1 SCLK_UART3>;
+ clock-names = "uart", "clk_uart_baud0";
+ status = "disabled";
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <1 13 0xff01>,
+ <1 14 0xff01>,
+ <1 11 0xff01>,
+ <1 10 0xff01>;
+ };
+ };
+};
--
1.7.9.5
next prev parent reply other threads:[~2014-09-02 15:35 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-02 15:35 [PATCH v2 0/7] arch: arm64: enable support for Samsung Exynos7 SoC Naveen Krishna Chatradhi
2014-09-02 15:35 ` [PATCH v2 1/7] clk: samsung: add support for 145xx and 1460x PLLs Naveen Krishna Chatradhi
2014-09-02 15:35 ` [PATCH v2 2/7] clk: samsung: Factor out the common code to clk.c Naveen Krishna Chatradhi
2014-09-02 15:35 ` [PATCH v2 3/7] clk: samsung: Add fixed_factor_clocks field to struct exynos_cmu_info Naveen Krishna Chatradhi
2014-09-02 15:35 ` [PATCH v2 4/7] clk: samsung: add initial clock support for Exynos7 SoC Naveen Krishna Chatradhi
2014-09-02 15:35 ` Naveen Krishna Chatradhi [this message]
2014-09-03 16:15 ` [PATCH v2 5/7] arm64: dts: Add initial device tree support for EXYNOS7 Kukjin Kim
2014-09-03 16:22 ` Arnd Bergmann
2014-09-03 16:31 ` Kukjin Kim
2014-09-03 18:28 ` Arnd Bergmann
2014-09-09 3:06 ` kgene
2014-09-09 3:28 ` kgene
2014-09-11 8:42 ` Naveen Krishna Ch
2014-09-02 15:35 ` [PATCH v2 6/7] tty/serial: samsung: enable usage for 64-bit Exynos platforms Naveen Krishna Chatradhi
2014-09-02 15:35 ` [PATCH v2 7/7] arm64: exynos7: Enable ARMv8 based Exynos7 (SoC) support Naveen Krishna Chatradhi
2014-09-02 16:37 ` [PATCH v2 0/7] arch: arm64: enable support for Samsung Exynos7 SoC Tomasz Figa
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1409672143-8574-6-git-send-email-ch.naveen@samsung.com \
--to=ch.naveen@samsung.com \
--cc=catalin.marinas@arm.com \
--cc=devicetree@vger.kernel.org \
--cc=kgene.kim@samsung.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=naveenkrishna.ch@gmail.com \
--cc=robh@kernel.org \
--cc=t.figa@samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).