[PATCH v3 1/9] of: Add NVIDIA Tegra XUSB mailbox binding

[Andrew Bresticker <abrestic@chromium.org>]

Add device-tree bindings for the Tegra XUSB mailbox which will be used
for communication between the Tegra xHCI controller's firmware and the
host processor.

Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
---
Changes from v2:
 - Dropped channel specifier.
 - Added pointer to mailbox documentation.
Changes from v1:
 - Updated to use common mailbox bindings.
---
 .../bindings/mailbox/nvidia,tegra124-xusb-mbox.txt | 32 ++++++++++++++++++++++
 1 file changed, 32 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mailbox/nvidia,tegra124-xusb-mbox.txt

diff --git a/Documentation/devicetree/bindings/mailbox/nvidia,tegra124-xusb-mbox.txt b/Documentation/devicetree/bindings/mailbox/nvidia,tegra124-xusb-mbox.txt
new file mode 100644
index 0000000..b35ea6e
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/nvidia,tegra124-xusb-mbox.txt
@@ -0,0 +1,32 @@
+NVIDIA Tegra XUSB mailbox
+=========================
+
+The Tegra XUSB mailbox is used by the Tegra xHCI controller's firmware to
+communicate requests to the host and PHY drivers.
+
+Refer to ./mailbox.txt for generic information about mailbox device-tree
+bindings.
+
+Required properties:
+--------------------
+ - compatible: Should be "nvidia,tegra124-xusb-mbox".
+ - reg: Address and length of the XUSB FPCI registers.
+ - interrupts: XUSB mailbox interrupt.
+ - #mbox-cells: Should be 0.  There is only one physical channel.
+
+Example:
+--------
+	xusb_mbox: mailbox@0,70098000 {
+		compatible = "nvidia,tegra124-xusb-mbox";
+		reg = <0x0 0x70098000 0x0 0x1000>;
+		interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+
+		#mbox-cells = <0>;
+	};
+
+	usb@0,70090000 {
+		...
+		mboxes = <&xusb_mbox>;
+		mbox-names = "xusb";
+		...
+	};
-- 
2.1.0.rc2.206.gedb03e5