devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Romain Perier <romain.perier@gmail.com>
To: heiko@sntech.de
Cc: linux-rockchip@lists.infradead.org,
	linux-arm-kernel@lists.infradead.org, netdev@vger.kernel.org,
	devicetree@vger.kernel.org, arnd@arndb.de
Subject: [PATCH 3/4] ARM: dts: Add emac nodes to the rk3188 device tree
Date: Wed,  3 Sep 2014 16:52:44 +0000	[thread overview]
Message-ID: <1409763165-16461-3-git-send-email-romain.perier@gmail.com> (raw)
In-Reply-To: <1409763165-16461-1-git-send-email-romain.perier@gmail.com>

This adds support for EMAC Rockchip driver on RK3188 SoCs.

Signed-off-by: Romain Perier <romain.perier@gmail.com>
---
 arch/arm/boot/dts/rk3188.dtsi | 18 ++++++++++++++++++
 arch/arm/boot/dts/rk3xxx.dtsi | 17 +++++++++++++++++
 2 files changed, 35 insertions(+)

diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi
index ee801a9..a182713 100644
--- a/arch/arm/boot/dts/rk3188.dtsi
+++ b/arch/arm/boot/dts/rk3188.dtsi
@@ -147,6 +147,24 @@
 			bias-disable;
 		};
 
+		emac {
+			emac_xfer: emac-xfer {
+				rockchip,pins = <RK_GPIO3 16 RK_FUNC_2 &pcfg_pull_none>, //tx_en
+						<RK_GPIO3 17 RK_FUNC_2 &pcfg_pull_none>, //txd1
+						<RK_GPIO3 18 RK_FUNC_2 &pcfg_pull_none>, //txd0
+						<RK_GPIO3 19 RK_FUNC_2 &pcfg_pull_none>, //rxd0
+						<RK_GPIO3 20 RK_FUNC_2 &pcfg_pull_none>, //rxd1
+						<RK_GPIO3 21 RK_FUNC_2 &pcfg_pull_none>, //mac_clk
+						<RK_GPIO3 22 RK_FUNC_2 &pcfg_pull_none>, //rx_err
+						<RK_GPIO3 23 RK_FUNC_2 &pcfg_pull_none>; //crs_dvalid
+			};
+
+			emac_mdio: emac-mdio {
+				rockchip,pins = <RK_GPIO3 24 RK_FUNC_2 &pcfg_pull_none>,
+						<RK_GPIO3 25 RK_FUNC_2 &pcfg_pull_none>;
+			};
+		};
+
 		i2c0 {
 			i2c0_xfer: i2c0-xfer {
 				rockchip,pins = <RK_GPIO1 24 RK_FUNC_1 &pcfg_pull_none>,
diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi
index 8caf85d..208b1df 100644
--- a/arch/arm/boot/dts/rk3xxx.dtsi
+++ b/arch/arm/boot/dts/rk3xxx.dtsi
@@ -91,6 +91,23 @@
 		status = "disabled";
 	};
 
+	emac: ethernet@10204000 {
+		compatible = "snps,arc-emac";
+		reg = <0x10204000 0x3c>;
+		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rockchip,grf = <&grf>;
+
+		clocks = <&cru HCLK_EMAC>, <&cru SCLK_MAC>;
+		clock-names = "hclk", "macref";
+		max-speed = <100>;
+		phy-mode = "rmii";
+
+		status = "disabled";
+	};
+
 	mmc0: dwmmc@10214000 {
 		compatible = "rockchip,rk2928-dw-mshc";
 		reg = <0x10214000 0x1000>;
-- 
1.9.1

  parent reply	other threads:[~2014-09-03 16:52 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-09-03 16:52 [PATCH v5 1/4] ethernet: arc: Add support for Rockchip SoC layer device tree bindings Romain Perier
2014-09-03 16:52 ` [PATCH v2 2/4] dt-bindings: Document EMAC Rockchip Romain Perier
2014-09-04 12:13   ` Heiko Stübner
2014-09-03 16:52 ` Romain Perier [this message]
2014-09-04 12:11   ` [PATCH 3/4] ARM: dts: Add emac nodes to the rk3188 device tree Heiko Stübner
2014-09-03 16:52 ` [PATCH v2 4/4] ARM: dts: Enable emac node on the rk3188-radxarock boards Romain Perier
2014-09-03 18:17 ` [PATCH v5 1/4] ethernet: arc: Add support for Rockchip SoC layer device tree bindings Arnd Bergmann
2014-09-03 21:12 ` Beniamino Galvani
     [not found]   ` <CABgxDoLWqqwGUUt9hWuJdHT_VF0c6-7xeAwgfeH7TwJmu1BN9w@mail.gmail.com>
2014-09-04 19:30     ` Beniamino Galvani
     [not found]   ` <3809311.80Auz8fbHu@wuerfel>
2014-09-04 21:38     ` Beniamino Galvani
2014-09-04 12:05 ` Heiko Stübner
2014-09-05 22:10 ` David Miller
  -- strict thread matches above, loose matches on Subject: below --
2014-09-03 10:27 [PATCH v4 " Romain Perier
2014-09-03 10:27 ` [PATCH 3/4] ARM: dts: Add emac nodes to the rk3188 device tree Romain Perier

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1409763165-16461-3-git-send-email-romain.perier@gmail.com \
    --to=romain.perier@gmail.com \
    --cc=arnd@arndb.de \
    --cc=devicetree@vger.kernel.org \
    --cc=heiko@sntech.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).