From mboxrd@z Thu Jan 1 00:00:00 1970 From: Boris BREZILLON Subject: [PATCH v5 04/11] pwm: add DT bindings documentation for atmel-hlcdc-pwm driver Date: Mon, 8 Sep 2014 10:43:35 +0200 Message-ID: <1410165822-16868-5-git-send-email-boris.brezillon@free-electrons.com> References: <1410165822-16868-1-git-send-email-boris.brezillon@free-electrons.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <1410165822-16868-1-git-send-email-boris.brezillon@free-electrons.com> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: dri-devel-bounces@lists.freedesktop.org Sender: "dri-devel" To: David Airlie , dri-devel@lists.freedesktop.org, Samuel Ortiz , Lee Jones , Thierry Reding , linux-pwm@vger.kernel.org, Nicolas Ferre , Jean-Christophe Plagniol-Villard , Alexandre Belloni , Andrew Victor Cc: Mark Rutland , devicetree@vger.kernel.org, Pawel Moll , Ludovic Desroches , Ian Campbell , Rob Herring , Laurent Pinchart , Bo Shen , Kumar Gala List-Id: devicetree@vger.kernel.org The HLCDC IP available in some Atmel SoCs (i.e. sam9x5i.e. at91sam9n12, at91sam9x5 family or sama5d3 family) provide a PWM device. The DT bindings used for this PWM device is following the default 3 cells bindings described in Documentation/devicetree/bindings/pwm/pwm.txt. Signed-off-by: Boris BREZILLON --- .../devicetree/bindings/pwm/atmel-hlcdc-pwm.txt | 55 ++++++++++++++++++++++ 1 file changed, 55 insertions(+) create mode 100644 Documentation/devicetree/bindings/pwm/atmel-hlcdc-pwm.txt diff --git a/Documentation/devicetree/bindings/pwm/atmel-hlcdc-pwm.txt b/Documentation/devicetree/bindings/pwm/atmel-hlcdc-pwm.txt new file mode 100644 index 0000000..86ad3e2 --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/atmel-hlcdc-pwm.txt @@ -0,0 +1,55 @@ +Device-Tree bindings for Atmel's HLCDC (High LCD Controller) PWM driver + +The Atmel HLCDC PWM is subdevice of the HLCDC MFD device. +See ../mfd/atmel-hlcdc.txt for more details. + +Required properties: + - compatible: value should be one of the following: + "atmel,hlcdc-pwm" + - pinctr-names: the pin control state names. Should contain "default". + - pinctrl-0: should contain the pinctrl states described by pinctrl + default. + - #pwm-cells: should be set to 3. This PWM chip use the default 3 cells + bindings defined in Documentation/devicetree/bindings/pwm/pwm.txt. + The first cell encodes the PWM id (0 is the only acceptable value here, + because the chip only provide one PWM). + The second cell encodes the PWM period in nanoseconds. + The third cell encodes the PWM flags (the only supported flag is + PWM_POLARITY_INVERTED) + +Example: + + hlcdc: hlcdc@f0030000 { + compatible = "atmel,sama5d3-hlcdc"; + reg = <0xf0030000 0x2000>; + clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>; + clock-names = "periph_clk","sys_clk", "slow_clk"; + status = "disabled"; + + hlcdc-display-controller { + compatible = "atmel,hlcdc-display-controller"; + interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>; + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + hlcdc_panel_output: endpoint@0 { + reg = <0>; + remote-endpoint = <&panel_input>; + }; + }; + }; + + hlcdc_pwm: hlcdc-pwm { + compatible = "atmel,hlcdc-pwm"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd_pwm>; + #pwm-cells = <3>; + }; + }; -- 1.9.1