[PATCH v3 0/8] arch: arm64: enable support for Samsung Exynos7 SoC

devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed

* [PATCH v3 0/8] arch: arm64: enable support for Samsung Exynos7 SoC
@ 2014-09-11 10:20 Naveen Krishna Chatradhi
  2014-09-11 10:20 ` [PATCH v3 1/8] clk: samsung: add support for 145xx and 1460x PLLs Naveen Krishna Chatradhi
                   ` (7 more replies)
  0 siblings, 8 replies; 11+ messages in thread
From: Naveen Krishna Chatradhi @ 2014-09-11 10:20 UTC (permalink / raw)
  To: linux-arm-kernel
  Cc: naveenkrishna.ch, linux-samsung-soc, catalin.marinas, robh,
	devicetree, tomasz.figa, kgene.kim

This patchset supports new Exynos7 Samsung SoC based on Cortex-A57.
Exynos7 is a System-On-Chip (SoC) that is based on 64-bit
ARMv8 RISC processor.

The following patches are tested based on Kgene's for-next tree.
https://git.kernel.org/cgit/linux/kernel/git/kgene/linux-samsung.git/log/?h=for-next

The following patches are required for this series.
1- "tty/serial: fix config dependencies for samsung serial"
   https://www.mail-archive.com/linux-samsung-soc@vger.kernel.org/msg36208.html

Alim Akhtar (1):
  arm64: exynos7: Enable ARMv8 based Exynos7 (SoC) support

Naveen Krishna Chatradhi (6):
  clk: samsung: add support for 145xx and 1460x PLLs
  clk: samsung: Factor out the common code to clk.c
  clk: samsung: Add fixed_factor_clocks field to struct exynos_cmu_info
  clk: samsung: add initial clock support for Exynos7 SoC
  arm64: dts: Add initial device tree support for EXYNOS7
  tty/serial: samsung: enable usage for 64-bit Exynos platforms

Pankaj Dubey (1):
  arm64: dts: add <dt-bindings/> symlink

 .../devicetree/bindings/clock/exynos7-clock.txt    |   37 ++
 arch/arm64/Kconfig                                 |   12 +
 arch/arm64/boot/dts/Makefile                       |    1 +
 arch/arm64/boot/dts/exynos/exynos7-espresso.dts    |   35 ++
 arch/arm64/boot/dts/exynos/exynos7.dtsi            |  167 ++++++++
 arch/arm64/boot/dts/include/dt-bindings            |    1 +
 drivers/clk/samsung/Makefile                       |    1 +
 drivers/clk/samsung/clk-exynos5260.c               |  185 ++-------
 drivers/clk/samsung/clk-exynos7.c                  |  438 ++++++++++++++++++++
 drivers/clk/samsung/clk-pll.c                      |   25 +-
 drivers/clk/samsung/clk-pll.h                      |    4 +
 drivers/clk/samsung/clk.c                          |   98 +++++
 drivers/clk/samsung/clk.h                          |   37 ++
 drivers/tty/serial/Kconfig                         |    2 +-
 include/dt-bindings/clock/exynos7-clk.h            |   55 +++
 15 files changed, 933 insertions(+), 165 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/clock/exynos7-clock.txt
 create mode 100644 arch/arm64/boot/dts/exynos/exynos7-espresso.dts
 create mode 100644 arch/arm64/boot/dts/exynos/exynos7.dtsi
 create mode 120000 arch/arm64/boot/dts/include/dt-bindings
 create mode 100644 drivers/clk/samsung/clk-exynos7.c
 create mode 100644 include/dt-bindings/clock/exynos7-clk.h

^ permalink raw reply	[flat|nested] 11+ messages in thread

* [PATCH v3 1/8] clk: samsung: add support for 145xx and 1460x PLLs
  2014-09-11 10:20 [PATCH v3 0/8] arch: arm64: enable support for Samsung Exynos7 SoC Naveen Krishna Chatradhi
@ 2014-09-11 10:20 ` Naveen Krishna Chatradhi
  2014-09-11 10:20 ` [PATCH v3 2/8] clk: samsung: Factor out the common code to clk.c Naveen Krishna Chatradhi
                   ` (6 subsequent siblings)
  7 siblings, 0 replies; 11+ messages in thread
From: Naveen Krishna Chatradhi @ 2014-09-11 10:20 UTC (permalink / raw)
  To: linux-arm-kernel
  Cc: naveenkrishna.ch, linux-samsung-soc, catalin.marinas, robh,
	devicetree, tomasz.figa, kgene.kim, Mike Turquette

PLL145xx is similar to PLL35xx and PLL1460x is almost similar
to PLL46xx with minor differences in bit positions. Hence,
reuse the functions defined for pll_35xx and pll_46xx to
support 145xx and 1460x PLLs respectively.

Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
Cc: Tomasz Figa <tomasz.figa@gmail.com>
Cc: Mike Turquette <mturquette@linaro.org>
---
 drivers/clk/samsung/clk-pll.c |   25 ++++++++++++++++++++-----
 drivers/clk/samsung/clk-pll.h |    4 ++++
 2 files changed, 24 insertions(+), 5 deletions(-)

diff --git a/drivers/clk/samsung/clk-pll.c b/drivers/clk/samsung/clk-pll.c
index b07fad2..9d70e5c 100644
--- a/drivers/clk/samsung/clk-pll.c
+++ b/drivers/clk/samsung/clk-pll.c
@@ -482,6 +482,8 @@ static const struct clk_ops samsung_pll45xx_clk_min_ops = {
 
 #define PLL46XX_VSEL_MASK	(1)
 #define PLL46XX_MDIV_MASK	(0x1FF)
+#define PLL1460X_MDIV_MASK	(0x3FF)
+
 #define PLL46XX_PDIV_MASK	(0x3F)
 #define PLL46XX_SDIV_MASK	(0x7)
 #define PLL46XX_VSEL_SHIFT	(27)
@@ -511,13 +513,15 @@ static unsigned long samsung_pll46xx_recalc_rate(struct clk_hw *hw,
 
 	pll_con0 = __raw_readl(pll->con_reg);
 	pll_con1 = __raw_readl(pll->con_reg + 4);
-	mdiv = (pll_con0 >> PLL46XX_MDIV_SHIFT) & PLL46XX_MDIV_MASK;
+	mdiv = (pll_con0 >> PLL46XX_MDIV_SHIFT) & ((pll->type == pll_1460x) ?
+				PLL1460X_MDIV_MASK : PLL46XX_MDIV_MASK);
 	pdiv = (pll_con0 >> PLL46XX_PDIV_SHIFT) & PLL46XX_PDIV_MASK;
 	sdiv = (pll_con0 >> PLL46XX_SDIV_SHIFT) & PLL46XX_SDIV_MASK;
 	kdiv = pll->type == pll_4650c ? pll_con1 & PLL4650C_KDIV_MASK :
 					pll_con1 & PLL46XX_KDIV_MASK;
 
-	shift = pll->type == pll_4600 ? 16 : 10;
+	shift = ((pll->type == pll_4600) || (pll->type == pll_1460x)) ? 16 : 10;
+
 	fvco *= (mdiv << shift) + kdiv;
 	do_div(fvco, (pdiv << sdiv));
 	fvco >>= shift;
@@ -573,14 +577,21 @@ static int samsung_pll46xx_set_rate(struct clk_hw *hw, unsigned long drate,
 		lock = 0xffff;
 
 	/* Set PLL PMS and VSEL values. */
-	con0 &= ~((PLL46XX_MDIV_MASK << PLL46XX_MDIV_SHIFT) |
+	if (pll->type == pll_1460x) {
+		con0 &= ~((PLL1460X_MDIV_MASK << PLL46XX_MDIV_SHIFT) |
+			(PLL46XX_PDIV_MASK << PLL46XX_PDIV_SHIFT) |
+			(PLL46XX_SDIV_MASK << PLL46XX_SDIV_SHIFT));
+	} else {
+		con0 &= ~((PLL46XX_MDIV_MASK << PLL46XX_MDIV_SHIFT) |
 			(PLL46XX_PDIV_MASK << PLL46XX_PDIV_SHIFT) |
 			(PLL46XX_SDIV_MASK << PLL46XX_SDIV_SHIFT) |
 			(PLL46XX_VSEL_MASK << PLL46XX_VSEL_SHIFT));
+		con0 |=	rate->vsel << PLL46XX_VSEL_SHIFT;
+	}
+
 	con0 |= (rate->mdiv << PLL46XX_MDIV_SHIFT) |
 			(rate->pdiv << PLL46XX_PDIV_SHIFT) |
-			(rate->sdiv << PLL46XX_SDIV_SHIFT) |
-			(rate->vsel << PLL46XX_VSEL_SHIFT);
+			(rate->sdiv << PLL46XX_SDIV_SHIFT);
 
 	/* Set PLL K, MFR and MRR values. */
 	con1 = __raw_readl(pll->con_reg + 0x4);
@@ -1190,6 +1201,9 @@ static void __init _samsung_clk_register_pll(struct samsung_clk_provider *ctx,
 	/* clk_ops for 35xx and 2550 are similar */
 	case pll_35xx:
 	case pll_2550:
+	case pll_1450x:
+	case pll_1451x:
+	case pll_1452x:
 		if (!pll->rate_table)
 			init.ops = &samsung_pll35xx_clk_min_ops;
 		else
@@ -1223,6 +1237,7 @@ static void __init _samsung_clk_register_pll(struct samsung_clk_provider *ctx,
 	case pll_4600:
 	case pll_4650:
 	case pll_4650c:
+	case pll_1460x:
 		if (!pll->rate_table)
 			init.ops = &samsung_pll46xx_clk_min_ops;
 		else
diff --git a/drivers/clk/samsung/clk-pll.h b/drivers/clk/samsung/clk-pll.h
index c0ed4d4..213de9a 100644
--- a/drivers/clk/samsung/clk-pll.h
+++ b/drivers/clk/samsung/clk-pll.h
@@ -33,6 +33,10 @@ enum samsung_pll_type {
 	pll_s3c2440_mpll,
 	pll_2550xx,
 	pll_2650xx,
+	pll_1450x,
+	pll_1451x,
+	pll_1452x,
+	pll_1460x,
 };
 
 #define PLL_35XX_RATE(_rate, _m, _p, _s)			\
-- 
1.7.9.5

^ permalink raw reply related	[flat|nested] 11+ messages in thread

* [PATCH v3 2/8] clk: samsung: Factor out the common code to clk.c
  2014-09-11 10:20 [PATCH v3 0/8] arch: arm64: enable support for Samsung Exynos7 SoC Naveen Krishna Chatradhi
  2014-09-11 10:20 ` [PATCH v3 1/8] clk: samsung: add support for 145xx and 1460x PLLs Naveen Krishna Chatradhi
@ 2014-09-11 10:20 ` Naveen Krishna Chatradhi
  2014-09-11 10:20 ` [PATCH v3 3/8] clk: samsung: Add fixed_factor_clocks field to struct exynos_cmu_info Naveen Krishna Chatradhi
                   ` (5 subsequent siblings)
  7 siblings, 0 replies; 11+ messages in thread
From: Naveen Krishna Chatradhi @ 2014-09-11 10:20 UTC (permalink / raw)
  To: linux-arm-kernel
  Cc: naveenkrishna.ch, linux-samsung-soc, catalin.marinas, robh,
	devicetree, tomasz.figa, kgene.kim, Mike Turquette

While adding clock support for Exynos5260, the infrastructure to
register multiple clock controllers was introduced. Factor out the
support for registering multiple clock controller from Exynos5260
clock code to common samsung clock code so that it can be used by
other Exynos SoC which have multiple clock controllers.

Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
Cc: Tomasz Figa <tomasz.figa@gmail.com>
Cc: Mike Turquette <mturquette@linaro.org>
---
 drivers/clk/samsung/clk-exynos5260.c |  185 +++++-----------------------------
 drivers/clk/samsung/clk.c            |   95 +++++++++++++++++
 drivers/clk/samsung/clk.h            |   34 +++++++
 3 files changed, 155 insertions(+), 159 deletions(-)

diff --git a/drivers/clk/samsung/clk-exynos5260.c b/drivers/clk/samsung/clk-exynos5260.c
index ce3de97..b08ac19 100644
--- a/drivers/clk/samsung/clk-exynos5260.c
+++ b/drivers/clk/samsung/clk-exynos5260.c
@@ -11,10 +11,8 @@
 
 #include <linux/clk.h>
 #include <linux/clkdev.h>
-#include <linux/clk-provider.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
-#include <linux/syscore_ops.h>
 
 #include "clk-exynos5260.h"
 #include "clk.h"
@@ -22,39 +20,6 @@
 
 #include <dt-bindings/clock/exynos5260-clk.h>
 
-static LIST_HEAD(clock_reg_cache_list);
-
-struct exynos5260_clock_reg_cache {
-	struct list_head node;
-	void __iomem *reg_base;
-	struct samsung_clk_reg_dump *rdump;
-	unsigned int rd_num;
-};
-
-struct exynos5260_cmu_info {
-	/* list of pll clocks and respective count */
-	struct samsung_pll_clock *pll_clks;
-	unsigned int nr_pll_clks;
-	/* list of mux clocks and respective count */
-	struct samsung_mux_clock *mux_clks;
-	unsigned int nr_mux_clks;
-	/* list of div clocks and respective count */
-	struct samsung_div_clock *div_clks;
-	unsigned int nr_div_clks;
-	/* list of gate clocks and respective count */
-	struct samsung_gate_clock *gate_clks;
-	unsigned int nr_gate_clks;
-	/* list of fixed clocks and respective count */
-	struct samsung_fixed_rate_clock *fixed_clks;
-	unsigned int nr_fixed_clks;
-	/* total number of clocks with IDs assigned*/
-	unsigned int nr_clk_ids;
-
-	/* list and number of clocks registers */
-	unsigned long *clk_regs;
-	unsigned int nr_clk_regs;
-};
-
 /*
  * Applicable for all 2550 Type PLLS for Exynos5260, listed below
  * DISP_PLL, EGL_PLL, KFC_PLL, MEM_PLL, BUS_PLL, MEDIA_PLL, G3D_PLL.
@@ -113,104 +78,6 @@ static struct samsung_pll_rate_table pll2650_24mhz_tbl[] __initdata = {
 	PLL_36XX_RATE(66000000, 176, 2, 5, 0),
 };
 
-#ifdef CONFIG_PM_SLEEP
-
-static int exynos5260_clk_suspend(void)
-{
-	struct exynos5260_clock_reg_cache *cache;
-
-	list_for_each_entry(cache, &clock_reg_cache_list, node)
-		samsung_clk_save(cache->reg_base, cache->rdump,
-				cache->rd_num);
-
-	return 0;
-}
-
-static void exynos5260_clk_resume(void)
-{
-	struct exynos5260_clock_reg_cache *cache;
-
-	list_for_each_entry(cache, &clock_reg_cache_list, node)
-		samsung_clk_restore(cache->reg_base, cache->rdump,
-				cache->rd_num);
-}
-
-static struct syscore_ops exynos5260_clk_syscore_ops = {
-	.suspend = exynos5260_clk_suspend,
-	.resume = exynos5260_clk_resume,
-};
-
-static void exynos5260_clk_sleep_init(void __iomem *reg_base,
-			unsigned long *rdump,
-			unsigned long nr_rdump)
-{
-	struct exynos5260_clock_reg_cache *reg_cache;
-
-	reg_cache = kzalloc(sizeof(struct exynos5260_clock_reg_cache),
-			GFP_KERNEL);
-	if (!reg_cache)
-		panic("could not allocate register cache.\n");
-
-	reg_cache->rdump = samsung_clk_alloc_reg_dump(rdump, nr_rdump);
-
-	if (!reg_cache->rdump)
-		panic("could not allocate register dump storage.\n");
-
-	if (list_empty(&clock_reg_cache_list))
-		register_syscore_ops(&exynos5260_clk_syscore_ops);
-
-	reg_cache->rd_num = nr_rdump;
-	reg_cache->reg_base = reg_base;
-	list_add_tail(&reg_cache->node, &clock_reg_cache_list);
-}
-
-#else
-static void exynos5260_clk_sleep_init(void __iomem *reg_base,
-			unsigned long *rdump,
-			unsigned long nr_rdump){}
-#endif
-
-/*
- * Common function which registers plls, muxes, dividers and gates
- * for each CMU. It also add CMU register list to register cache.
- */
-
-void __init exynos5260_cmu_register_one(struct device_node *np,
-			struct exynos5260_cmu_info *cmu)
-{
-	void __iomem *reg_base;
-	struct samsung_clk_provider *ctx;
-
-	reg_base = of_iomap(np, 0);
-	if (!reg_base)
-		panic("%s: failed to map registers\n", __func__);
-
-	ctx = samsung_clk_init(np, reg_base, cmu->nr_clk_ids);
-	if (!ctx)
-		panic("%s: unable to alllocate ctx\n", __func__);
-
-	if (cmu->pll_clks)
-		samsung_clk_register_pll(ctx, cmu->pll_clks, cmu->nr_pll_clks,
-			reg_base);
-	if (cmu->mux_clks)
-		samsung_clk_register_mux(ctx,  cmu->mux_clks,
-			cmu->nr_mux_clks);
-	if (cmu->div_clks)
-		samsung_clk_register_div(ctx, cmu->div_clks, cmu->nr_div_clks);
-	if (cmu->gate_clks)
-		samsung_clk_register_gate(ctx, cmu->gate_clks,
-			cmu->nr_gate_clks);
-	if (cmu->fixed_clks)
-		samsung_clk_register_fixed_rate(ctx, cmu->fixed_clks,
-			cmu->nr_fixed_clks);
-	if (cmu->clk_regs)
-		exynos5260_clk_sleep_init(reg_base, cmu->clk_regs,
-			cmu->nr_clk_regs);
-
-	samsung_clk_of_add_provider(np, ctx);
-}
-
-
 /* CMU_AUD */
 
 static unsigned long aud_clk_regs[] __initdata = {
@@ -268,7 +135,7 @@ struct samsung_gate_clock aud_gate_clks[] __initdata = {
 
 static void __init exynos5260_clk_aud_init(struct device_node *np)
 {
-	struct exynos5260_cmu_info cmu = {0};
+	struct exynos_cmu_info cmu = {0};
 
 	cmu.mux_clks = aud_mux_clks;
 	cmu.nr_mux_clks = ARRAY_SIZE(aud_mux_clks);
@@ -280,7 +147,7 @@ static void __init exynos5260_clk_aud_init(struct device_node *np)
 	cmu.clk_regs = aud_clk_regs;
 	cmu.nr_clk_regs = ARRAY_SIZE(aud_clk_regs);
 
-	exynos5260_cmu_register_one(np, &cmu);
+	exynos_cmu_register_one(np, &cmu);
 }
 
 CLK_OF_DECLARE(exynos5260_clk_aud, "samsung,exynos5260-clock-aud",
@@ -458,7 +325,7 @@ struct samsung_gate_clock disp_gate_clks[] __initdata = {
 
 static void __init exynos5260_clk_disp_init(struct device_node *np)
 {
-	struct exynos5260_cmu_info cmu = {0};
+	struct exynos_cmu_info cmu = {0};
 
 	cmu.mux_clks = disp_mux_clks;
 	cmu.nr_mux_clks = ARRAY_SIZE(disp_mux_clks);
@@ -470,7 +337,7 @@ static void __init exynos5260_clk_disp_init(struct device_node *np)
 	cmu.clk_regs = disp_clk_regs;
 	cmu.nr_clk_regs = ARRAY_SIZE(disp_clk_regs);
 
-	exynos5260_cmu_register_one(np, &cmu);
+	exynos_cmu_register_one(np, &cmu);
 }
 
 CLK_OF_DECLARE(exynos5260_clk_disp, "samsung,exynos5260-clock-disp",
@@ -522,7 +389,7 @@ static struct samsung_pll_clock egl_pll_clks[] __initdata = {
 
 static void __init exynos5260_clk_egl_init(struct device_node *np)
 {
-	struct exynos5260_cmu_info cmu = {0};
+	struct exynos_cmu_info cmu = {0};
 
 	cmu.pll_clks = egl_pll_clks;
 	cmu.nr_pll_clks =  ARRAY_SIZE(egl_pll_clks);
@@ -534,7 +401,7 @@ static void __init exynos5260_clk_egl_init(struct device_node *np)
 	cmu.clk_regs = egl_clk_regs;
 	cmu.nr_clk_regs = ARRAY_SIZE(egl_clk_regs);
 
-	exynos5260_cmu_register_one(np, &cmu);
+	exynos_cmu_register_one(np, &cmu);
 }
 
 CLK_OF_DECLARE(exynos5260_clk_egl, "samsung,exynos5260-clock-egl",
@@ -624,7 +491,7 @@ struct samsung_gate_clock fsys_gate_clks[] __initdata = {
 
 static void __init exynos5260_clk_fsys_init(struct device_node *np)
 {
-	struct exynos5260_cmu_info cmu = {0};
+	struct exynos_cmu_info cmu = {0};
 
 	cmu.mux_clks = fsys_mux_clks;
 	cmu.nr_mux_clks = ARRAY_SIZE(fsys_mux_clks);
@@ -634,7 +501,7 @@ static void __init exynos5260_clk_fsys_init(struct device_node *np)
 	cmu.clk_regs = fsys_clk_regs;
 	cmu.nr_clk_regs = ARRAY_SIZE(fsys_clk_regs);
 
-	exynos5260_cmu_register_one(np, &cmu);
+	exynos_cmu_register_one(np, &cmu);
 }
 
 CLK_OF_DECLARE(exynos5260_clk_fsys, "samsung,exynos5260-clock-fsys",
@@ -713,7 +580,7 @@ struct samsung_gate_clock g2d_gate_clks[] __initdata = {
 
 static void __init exynos5260_clk_g2d_init(struct device_node *np)
 {
-	struct exynos5260_cmu_info cmu = {0};
+	struct exynos_cmu_info cmu = {0};
 
 	cmu.mux_clks = g2d_mux_clks;
 	cmu.nr_mux_clks = ARRAY_SIZE(g2d_mux_clks);
@@ -725,7 +592,7 @@ static void __init exynos5260_clk_g2d_init(struct device_node *np)
 	cmu.clk_regs = g2d_clk_regs;
 	cmu.nr_clk_regs = ARRAY_SIZE(g2d_clk_regs);
 
-	exynos5260_cmu_register_one(np, &cmu);
+	exynos_cmu_register_one(np, &cmu);
 }
 
 CLK_OF_DECLARE(exynos5260_clk_g2d, "samsung,exynos5260-clock-g2d",
@@ -774,7 +641,7 @@ static struct samsung_pll_clock g3d_pll_clks[] __initdata = {
 
 static void __init exynos5260_clk_g3d_init(struct device_node *np)
 {
-	struct exynos5260_cmu_info cmu = {0};
+	struct exynos_cmu_info cmu = {0};
 
 	cmu.pll_clks = g3d_pll_clks;
 	cmu.nr_pll_clks =  ARRAY_SIZE(g3d_pll_clks);
@@ -788,7 +655,7 @@ static void __init exynos5260_clk_g3d_init(struct device_node *np)
 	cmu.clk_regs = g3d_clk_regs;
 	cmu.nr_clk_regs = ARRAY_SIZE(g3d_clk_regs);
 
-	exynos5260_cmu_register_one(np, &cmu);
+	exynos_cmu_register_one(np, &cmu);
 }
 
 CLK_OF_DECLARE(exynos5260_clk_g3d, "samsung,exynos5260-clock-g3d",
@@ -909,7 +776,7 @@ struct samsung_gate_clock gscl_gate_clks[] __initdata = {
 
 static void __init exynos5260_clk_gscl_init(struct device_node *np)
 {
-	struct exynos5260_cmu_info cmu = {0};
+	struct exynos_cmu_info cmu = {0};
 
 	cmu.mux_clks = gscl_mux_clks;
 	cmu.nr_mux_clks = ARRAY_SIZE(gscl_mux_clks);
@@ -921,7 +788,7 @@ static void __init exynos5260_clk_gscl_init(struct device_node *np)
 	cmu.clk_regs = gscl_clk_regs;
 	cmu.nr_clk_regs = ARRAY_SIZE(gscl_clk_regs);
 
-	exynos5260_cmu_register_one(np, &cmu);
+	exynos_cmu_register_one(np, &cmu);
 }
 
 CLK_OF_DECLARE(exynos5260_clk_gscl, "samsung,exynos5260-clock-gscl",
@@ -1028,7 +895,7 @@ struct samsung_gate_clock isp_gate_clks[] __initdata = {
 
 static void __init exynos5260_clk_isp_init(struct device_node *np)
 {
-	struct exynos5260_cmu_info cmu = {0};
+	struct exynos_cmu_info cmu = {0};
 
 	cmu.mux_clks = isp_mux_clks;
 	cmu.nr_mux_clks = ARRAY_SIZE(isp_mux_clks);
@@ -1040,7 +907,7 @@ static void __init exynos5260_clk_isp_init(struct device_node *np)
 	cmu.clk_regs = isp_clk_regs;
 	cmu.nr_clk_regs = ARRAY_SIZE(isp_clk_regs);
 
-	exynos5260_cmu_register_one(np, &cmu);
+	exynos_cmu_register_one(np, &cmu);
 }
 
 CLK_OF_DECLARE(exynos5260_clk_isp, "samsung,exynos5260-clock-isp",
@@ -1092,7 +959,7 @@ static struct samsung_pll_clock kfc_pll_clks[] __initdata = {
 
 static void __init exynos5260_clk_kfc_init(struct device_node *np)
 {
-	struct exynos5260_cmu_info cmu = {0};
+	struct exynos_cmu_info cmu = {0};
 
 	cmu.pll_clks = kfc_pll_clks;
 	cmu.nr_pll_clks =  ARRAY_SIZE(kfc_pll_clks);
@@ -1104,7 +971,7 @@ static void __init exynos5260_clk_kfc_init(struct device_node *np)
 	cmu.clk_regs = kfc_clk_regs;
 	cmu.nr_clk_regs = ARRAY_SIZE(kfc_clk_regs);
 
-	exynos5260_cmu_register_one(np, &cmu);
+	exynos_cmu_register_one(np, &cmu);
 }
 
 CLK_OF_DECLARE(exynos5260_clk_kfc, "samsung,exynos5260-clock-kfc",
@@ -1148,7 +1015,7 @@ struct samsung_gate_clock mfc_gate_clks[] __initdata = {
 
 static void __init exynos5260_clk_mfc_init(struct device_node *np)
 {
-	struct exynos5260_cmu_info cmu = {0};
+	struct exynos_cmu_info cmu = {0};
 
 	cmu.mux_clks = mfc_mux_clks;
 	cmu.nr_mux_clks = ARRAY_SIZE(mfc_mux_clks);
@@ -1160,7 +1027,7 @@ static void __init exynos5260_clk_mfc_init(struct device_node *np)
 	cmu.clk_regs = mfc_clk_regs;
 	cmu.nr_clk_regs = ARRAY_SIZE(mfc_clk_regs);
 
-	exynos5260_cmu_register_one(np, &cmu);
+	exynos_cmu_register_one(np, &cmu);
 }
 
 CLK_OF_DECLARE(exynos5260_clk_mfc, "samsung,exynos5260-clock-mfc",
@@ -1295,7 +1162,7 @@ static struct samsung_pll_clock mif_pll_clks[] __initdata = {
 
 static void __init exynos5260_clk_mif_init(struct device_node *np)
 {
-	struct exynos5260_cmu_info cmu = {0};
+	struct exynos_cmu_info cmu = {0};
 
 	cmu.pll_clks = mif_pll_clks;
 	cmu.nr_pll_clks =  ARRAY_SIZE(mif_pll_clks);
@@ -1309,7 +1176,7 @@ static void __init exynos5260_clk_mif_init(struct device_node *np)
 	cmu.clk_regs = mif_clk_regs;
 	cmu.nr_clk_regs = ARRAY_SIZE(mif_clk_regs);
 
-	exynos5260_cmu_register_one(np, &cmu);
+	exynos_cmu_register_one(np, &cmu);
 }
 
 CLK_OF_DECLARE(exynos5260_clk_mif, "samsung,exynos5260-clock-mif",
@@ -1503,7 +1370,7 @@ struct samsung_gate_clock peri_gate_clks[] __initdata = {
 
 static void __init exynos5260_clk_peri_init(struct device_node *np)
 {
-	struct exynos5260_cmu_info cmu = {0};
+	struct exynos_cmu_info cmu = {0};
 
 	cmu.mux_clks = peri_mux_clks;
 	cmu.nr_mux_clks = ARRAY_SIZE(peri_mux_clks);
@@ -1515,7 +1382,7 @@ static void __init exynos5260_clk_peri_init(struct device_node *np)
 	cmu.clk_regs = peri_clk_regs;
 	cmu.nr_clk_regs = ARRAY_SIZE(peri_clk_regs);
 
-	exynos5260_cmu_register_one(np, &cmu);
+	exynos_cmu_register_one(np, &cmu);
 }
 
 CLK_OF_DECLARE(exynos5260_clk_peri, "samsung,exynos5260-clock-peri",
@@ -1959,7 +1826,7 @@ static struct samsung_pll_clock top_pll_clks[] __initdata = {
 
 static void __init exynos5260_clk_top_init(struct device_node *np)
 {
-	struct exynos5260_cmu_info cmu = {0};
+	struct exynos_cmu_info cmu = {0};
 
 	cmu.pll_clks = top_pll_clks;
 	cmu.nr_pll_clks =  ARRAY_SIZE(top_pll_clks);
@@ -1975,7 +1842,7 @@ static void __init exynos5260_clk_top_init(struct device_node *np)
 	cmu.clk_regs = top_clk_regs;
 	cmu.nr_clk_regs = ARRAY_SIZE(top_clk_regs);
 
-	exynos5260_cmu_register_one(np, &cmu);
+	exynos_cmu_register_one(np, &cmu);
 }
 
 CLK_OF_DECLARE(exynos5260_clk_top, "samsung,exynos5260-clock-top",
diff --git a/drivers/clk/samsung/clk.c b/drivers/clk/samsung/clk.c
index deab84d..a043654 100644
--- a/drivers/clk/samsung/clk.c
+++ b/drivers/clk/samsung/clk.c
@@ -14,6 +14,8 @@
 #include <linux/syscore_ops.h>
 #include "clk.h"
 
+static LIST_HEAD(clock_reg_cache_list);
+
 void samsung_clk_save(void __iomem *base,
 				    struct samsung_clk_reg_dump *rd,
 				    unsigned int num_regs)
@@ -313,3 +315,96 @@ unsigned long _get_rate(const char *clk_name)
 
 	return clk_get_rate(clk);
 }
+
+#ifdef CONFIG_PM_SLEEP
+static int exynos_clk_suspend(void)
+{
+	struct exynos_clock_reg_cache *reg_cache;
+
+	list_for_each_entry(reg_cache, &clock_reg_cache_list, node)
+		samsung_clk_save(reg_cache->reg_base, reg_cache->rdump,
+				reg_cache->rd_num);
+	return 0;
+}
+
+static void exynos_clk_resume(void)
+{
+	struct exynos_clock_reg_cache *reg_cache;
+
+	list_for_each_entry(reg_cache, &clock_reg_cache_list, node)
+		samsung_clk_restore(reg_cache->reg_base, reg_cache->rdump,
+				reg_cache->rd_num);
+}
+
+static struct syscore_ops exynos_clk_syscore_ops = {
+	.suspend = exynos_clk_suspend,
+	.resume = exynos_clk_resume,
+};
+
+static void exynos_clk_sleep_init(void __iomem *reg_base,
+		const unsigned long *rdump,
+		unsigned long nr_rdump)
+{
+	struct exynos_clock_reg_cache *reg_cache;
+
+	reg_cache = kzalloc(sizeof(struct exynos_clock_reg_cache),
+			GFP_KERNEL);
+	if (!reg_cache)
+		panic("could not allocate register reg_cache.\n");
+	reg_cache->rdump = samsung_clk_alloc_reg_dump(rdump, nr_rdump);
+
+	if (!reg_cache->rdump)
+		panic("could not allocate register dump storage.\n");
+
+	if (list_empty(&clock_reg_cache_list))
+		register_syscore_ops(&exynos_clk_syscore_ops);
+
+	reg_cache->reg_base = reg_base;
+	reg_cache->rd_num = nr_rdump;
+	list_add_tail(&reg_cache->node, &clock_reg_cache_list);
+}
+
+#else
+static void exynos_clk_sleep_init(void __iomem *reg_base,
+		const unsigned long *rdump,
+		unsigned long nr_rdump) {}
+#endif
+
+/*
+ * Common function which registers plls, muxes, dividers and gates
+ * for each CMU. It also add CMU register list to register cache.
+ */
+void __init exynos_cmu_register_one(struct device_node *np,
+			struct exynos_cmu_info *cmu)
+{
+	void __iomem *reg_base;
+	struct samsung_clk_provider *ctx;
+
+	reg_base = of_iomap(np, 0);
+	if (!reg_base)
+		panic("%s: failed to map registers\n", __func__);
+
+	ctx = samsung_clk_init(np, reg_base, cmu->nr_clk_ids);
+	if (!ctx)
+		panic("%s: unable to alllocate ctx\n", __func__);
+
+	if (cmu->pll_clks)
+		samsung_clk_register_pll(ctx, cmu->pll_clks, cmu->nr_pll_clks,
+			reg_base);
+	if (cmu->mux_clks)
+		samsung_clk_register_mux(ctx, cmu->mux_clks,
+			cmu->nr_mux_clks);
+	if (cmu->div_clks)
+		samsung_clk_register_div(ctx, cmu->div_clks, cmu->nr_div_clks);
+	if (cmu->gate_clks)
+		samsung_clk_register_gate(ctx, cmu->gate_clks,
+			cmu->nr_gate_clks);
+	if (cmu->fixed_clks)
+		samsung_clk_register_fixed_rate(ctx, cmu->fixed_clks,
+			cmu->nr_fixed_clks);
+	if (cmu->clk_regs)
+		exynos_clk_sleep_init(reg_base, cmu->clk_regs,
+			cmu->nr_clk_regs);
+
+	samsung_clk_of_add_provider(np, ctx);
+}
diff --git a/drivers/clk/samsung/clk.h b/drivers/clk/samsung/clk.h
index 66ab36b..552d155 100644
--- a/drivers/clk/samsung/clk.h
+++ b/drivers/clk/samsung/clk.h
@@ -324,6 +324,37 @@ struct samsung_pll_clock {
 	__PLL(_typ, _id, NULL, _name, _pname, CLK_GET_RATE_NOCACHE,	\
 		_lock, _con, _rtable, _alias)
 
+struct exynos_clock_reg_cache {
+	struct list_head node;
+	void __iomem *reg_base;
+	struct samsung_clk_reg_dump *rdump;
+	unsigned int rd_num;
+};
+
+struct exynos_cmu_info {
+	/* list of pll clocks and respective count */
+	struct samsung_pll_clock *pll_clks;
+	unsigned int nr_pll_clks;
+	/* list of mux clocks and respective count */
+	struct samsung_mux_clock *mux_clks;
+	unsigned int nr_mux_clks;
+	/* list of div clocks and respective count */
+	struct samsung_div_clock *div_clks;
+	unsigned int nr_div_clks;
+	/* list of gate clocks and respective count */
+	struct samsung_gate_clock *gate_clks;
+	unsigned int nr_gate_clks;
+	/* list of fixed clocks and respective count */
+	struct samsung_fixed_rate_clock *fixed_clks;
+	unsigned int nr_fixed_clks;
+	/* total number of clocks with IDs assigned*/
+	unsigned int nr_clk_ids;
+
+	/* list and number of clocks registers */
+	unsigned long *clk_regs;
+	unsigned int nr_clk_regs;
+};
+
 extern struct samsung_clk_provider *__init samsung_clk_init(
 			struct device_node *np, void __iomem *base,
 			unsigned long nr_clks);
@@ -362,6 +393,9 @@ extern void __init samsung_clk_register_pll(struct samsung_clk_provider *ctx,
 			struct samsung_pll_clock *pll_list,
 			unsigned int nr_clk, void __iomem *base);
 
+extern void __init exynos_cmu_register_one(struct device_node *,
+			struct exynos_cmu_info *);
+
 extern unsigned long _get_rate(const char *clk_name);
 
 extern void samsung_clk_save(void __iomem *base,
-- 
1.7.9.5

^ permalink raw reply related	[flat|nested] 11+ messages in thread

* [PATCH v3 3/8] clk: samsung: Add fixed_factor_clocks field to struct exynos_cmu_info
  2014-09-11 10:20 [PATCH v3 0/8] arch: arm64: enable support for Samsung Exynos7 SoC Naveen Krishna Chatradhi
  2014-09-11 10:20 ` [PATCH v3 1/8] clk: samsung: add support for 145xx and 1460x PLLs Naveen Krishna Chatradhi
  2014-09-11 10:20 ` [PATCH v3 2/8] clk: samsung: Factor out the common code to clk.c Naveen Krishna Chatradhi
@ 2014-09-11 10:20 ` Naveen Krishna Chatradhi
  2014-09-11 10:20 ` [PATCH v3 4/8] clk: samsung: add initial clock support for Exynos7 SoC Naveen Krishna Chatradhi
                   ` (4 subsequent siblings)
  7 siblings, 0 replies; 11+ messages in thread
From: Naveen Krishna Chatradhi @ 2014-09-11 10:20 UTC (permalink / raw)
  To: linux-arm-kernel
  Cc: naveenkrishna.ch, linux-samsung-soc, catalin.marinas, robh,
	devicetree, tomasz.figa, kgene.kim, Mike Turquette

Add the fields "fixed_factor_clks" and "nr_fixed_factor_clks" to
"struct exynos_cmu_info" to allow registering of fixed factor
clocks as well with exynos_cmu_register_one().

Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
Cc: Tomasz Figa <tomasz.figa@gmail.com>
Cc: Mike Turquette <mturquette@linaro.org>
---
 drivers/clk/samsung/clk.c |    3 +++
 drivers/clk/samsung/clk.h |    3 +++
 2 files changed, 6 insertions(+)

diff --git a/drivers/clk/samsung/clk.c b/drivers/clk/samsung/clk.c
index a043654..4b31267 100644
--- a/drivers/clk/samsung/clk.c
+++ b/drivers/clk/samsung/clk.c
@@ -402,6 +402,9 @@ void __init exynos_cmu_register_one(struct device_node *np,
 	if (cmu->fixed_clks)
 		samsung_clk_register_fixed_rate(ctx, cmu->fixed_clks,
 			cmu->nr_fixed_clks);
+	if (cmu->fixed_factor_clks)
+		samsung_clk_register_fixed_factor(ctx, cmu->fixed_factor_clks,
+			cmu->nr_fixed_factor_clks);
 	if (cmu->clk_regs)
 		exynos_clk_sleep_init(reg_base, cmu->clk_regs,
 			cmu->nr_clk_regs);
diff --git a/drivers/clk/samsung/clk.h b/drivers/clk/samsung/clk.h
index 552d155..993b51c 100644
--- a/drivers/clk/samsung/clk.h
+++ b/drivers/clk/samsung/clk.h
@@ -347,6 +347,9 @@ struct exynos_cmu_info {
 	/* list of fixed clocks and respective count */
 	struct samsung_fixed_rate_clock *fixed_clks;
 	unsigned int nr_fixed_clks;
+	/* list of fixed factor clocks and respective count */
+	struct samsung_fixed_factor_clock *fixed_factor_clks;
+	unsigned int nr_fixed_factor_clks;
 	/* total number of clocks with IDs assigned*/
 	unsigned int nr_clk_ids;
 
-- 
1.7.9.5

^ permalink raw reply related	[flat|nested] 11+ messages in thread

* [PATCH v3 4/8] clk: samsung: add initial clock support for Exynos7 SoC
  2014-09-11 10:20 [PATCH v3 0/8] arch: arm64: enable support for Samsung Exynos7 SoC Naveen Krishna Chatradhi
                   ` (2 preceding siblings ...)
  2014-09-11 10:20 ` [PATCH v3 3/8] clk: samsung: Add fixed_factor_clocks field to struct exynos_cmu_info Naveen Krishna Chatradhi
@ 2014-09-11 10:20 ` Naveen Krishna Chatradhi
  2014-09-11 10:20 ` [PATCH v3 5/8] arm64: dts: Add initial device tree support for EXYNOS7 Naveen Krishna Chatradhi
                   ` (3 subsequent siblings)
  7 siblings, 0 replies; 11+ messages in thread
From: Naveen Krishna Chatradhi @ 2014-09-11 10:20 UTC (permalink / raw)
  To: linux-arm-kernel
  Cc: naveenkrishna.ch, linux-samsung-soc, catalin.marinas, robh,
	devicetree, tomasz.figa, kgene.kim, Mike Turquette

Add initial clock support for Exynos7 SoC which is required
to bring up platforms based on Exynos7.

Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
Cc: Tomasz Figa <tomasz.figa@gmail.com>
Cc: Mike Turquette <mturquette@linaro.org>
---
 .../devicetree/bindings/clock/exynos7-clock.txt    |   37 ++
 drivers/clk/samsung/Makefile                       |    1 +
 drivers/clk/samsung/clk-exynos7.c                  |  438 ++++++++++++++++++++
 include/dt-bindings/clock/exynos7-clk.h            |   55 +++
 4 files changed, 531 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/exynos7-clock.txt
 create mode 100644 drivers/clk/samsung/clk-exynos7.c
 create mode 100644 include/dt-bindings/clock/exynos7-clk.h

diff --git a/Documentation/devicetree/bindings/clock/exynos7-clock.txt b/Documentation/devicetree/bindings/clock/exynos7-clock.txt
new file mode 100644
index 0000000..798eb10
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/exynos7-clock.txt
@@ -0,0 +1,37 @@
+* Samsung Exynos7 Clock Controller
+
+Exynos7 clock controller has various blocks which are instantiated
+independently from the device-tree. These clock controllers
+generate and supply clocks to various hardware blocks within
+the SoC.
+
+Each clock is assigned an identifier and client nodes can use
+this identifier to specify the clock which they consume. All
+available clocks are defined as preprocessor macros in
+dt-bindings/clock/exynos7-clk.h header and can be used in
+device tree sources.
+
+External clocks:
+
+There are several clocks that are generated outside the SoC. It
+is expected that they are defined using standard clock bindings
+with following clock-output-names:
+
+ - "fin_pll" - PLL input clock from XXTI
+
+Required Properties for Clock Controller:
+
+ - compatible: clock controllers will use one of the following
+	compatible strings to indicate the clock controller
+	functionality.
+
+	- "samsung,exynos7-clock-topc"
+	- "samsung,exynos7-clock-top0"
+	- "samsung,exynos7-clock-peric0"
+	- "samsung,exynos7-clock-peric1"
+	- "samsung,exynos7-clock-peris"
+
+ - reg: physical base address of the controller and the length of
+	memory mapped region.
+
+ - #clock-cells: should be 1.
diff --git a/drivers/clk/samsung/Makefile b/drivers/clk/samsung/Makefile
index 6fb4bc6..5da0ba9 100644
--- a/drivers/clk/samsung/Makefile
+++ b/drivers/clk/samsung/Makefile
@@ -18,3 +18,4 @@ obj-$(CONFIG_S3C2412_COMMON_CLK)+= clk-s3c2412.o
 obj-$(CONFIG_S3C2443_COMMON_CLK)+= clk-s3c2443.o
 obj-$(CONFIG_ARCH_S3C64XX)	+= clk-s3c64xx.o
 obj-$(CONFIG_ARCH_S5PV210)	+= clk-s5pv210.o clk-s5pv210-audss.o
+obj-$(CONFIG_ARCH_EXYNOS7)	+= clk-exynos7.o
diff --git a/drivers/clk/samsung/clk-exynos7.c b/drivers/clk/samsung/clk-exynos7.c
new file mode 100644
index 0000000..25e12b3
--- /dev/null
+++ b/drivers/clk/samsung/clk-exynos7.c
@@ -0,0 +1,438 @@
+/*
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ * Author: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+
+#include "clk.h"
+#include <dt-bindings/clock/exynos7-clk.h>
+
+/* Register Offset definitions for CMU_TOPC (0x10570000) */
+#define CC_PLL_LOCK		0x0000
+#define BUS0_PLL_LOCK		0x0004
+#define BUS1_DPLL_LOCK		0x0008
+#define MFC_PLL_LOCK		0x000C
+#define AUD_PLL_LOCK		0x0010
+#define CC_PLL_CON0		0x0100
+#define BUS0_PLL_CON0		0x0110
+#define BUS1_DPLL_CON0		0x0120
+#define MFC_PLL_CON0		0x0130
+#define AUD_PLL_CON0		0x0140
+#define AUD_PLL_CON1		0x0144
+#define AUD_PLL_CON2		0x0148
+#define MIF_PLL_CON0		0x0150
+#define MIF_PLL_CON1		0x0154
+#define MIF_PLL_CON2		0x0158
+#define MUX_SEL_TOPC0		0x0200
+#define MUX_SEL_TOPC1		0x0204
+#define MUX_SEL_TOPC3		0x020C
+#define DIV_TOPC1		0x0604
+#define DIV_TOPC3		0x060C
+#define ENABLE_ACLK_TOPC1	0x0804
+#define ENABLE_SCLK_TOPC1	0x0A04
+
+static struct samsung_fixed_factor_clock topc_fixed_factor_clks[] __initdata = {
+	FFACTOR(0, "ffac_topc_bus0_pll_div2", "mout_bus0_pll_ctrl", 1, 2, 0),
+	FFACTOR(0, "ffac_topc_bus0_pll_div4",
+				"ffac_topc_bus0_pll_div2", 1, 2, 0),
+	FFACTOR(0, "ffac_topc_bus1_pll_div2", "mout_bus1_pll_ctrl", 1, 2, 0),
+	FFACTOR(0, "ffac_topc_cc_pll_div2", "mout_cc_pll_ctrl", 1, 2, 0),
+	FFACTOR(0, "ffac_topc_mfc_pll_div2", "mout_mfc_pll_ctrl", 1, 2, 0),
+};
+
+/* List of parent clocks for Muxes in CMU_TOPC */
+PNAME(mout_bus0_pll_ctrl_p)	= { "fin_pll", "fout_bus0_pll" };
+PNAME(mout_bus1_pll_ctrl_p)	= { "fin_pll", "fout_bus1_pll" };
+PNAME(mout_cc_pll_ctrl_p)	= { "fin_pll", "fout_cc_pll" };
+PNAME(mout_mfc_pll_ctrl_p)	= { "fin_pll", "fout_mfc_pll" };
+
+PNAME(mout_topc_group2)        = { "mout_sclk_bus0_pll_cmuc",
+	"mout_sclk_bus1_pll_cmuc", "mout_sclk_cc_pll_cmuc",
+	"mout_sclk_mfc_pll_cmuc" };
+
+PNAME(mout_sclk_bus0_pll_out_p)	= {"mout_bus0_pll_ctrl",
+	"ffac_topc_bus0_pll_div2"};
+
+static unsigned long topc_clk_regs[] __initdata = {
+	CC_PLL_LOCK,
+	BUS0_PLL_LOCK,
+	BUS1_DPLL_LOCK,
+	MFC_PLL_LOCK,
+	AUD_PLL_LOCK,
+	CC_PLL_CON0,
+	BUS0_PLL_CON0,
+	BUS1_DPLL_CON0,
+	MFC_PLL_CON0,
+	MUX_SEL_TOPC0,
+	MUX_SEL_TOPC1,
+	MUX_SEL_TOPC3,
+	DIV_TOPC1,
+	DIV_TOPC3,
+	ENABLE_ACLK_TOPC1,
+	ENABLE_SCLK_TOPC1,
+};
+
+static struct samsung_mux_clock topc_mux_clks[] __initdata = {
+	MUX(0, "mout_bus0_pll_ctrl", mout_bus0_pll_ctrl_p, MUX_SEL_TOPC0, 0, 1),
+	MUX(0, "mout_bus1_pll_ctrl", mout_bus1_pll_ctrl_p, MUX_SEL_TOPC0, 4, 1),
+	MUX(0, "mout_cc_pll_ctrl", mout_cc_pll_ctrl_p, MUX_SEL_TOPC0, 8, 1),
+	MUX(0, "mout_mfc_pll_ctrl", mout_mfc_pll_ctrl_p, MUX_SEL_TOPC0, 12, 1),
+
+	MUX(0, "mout_sclk_bus0_pll_out",
+			mout_sclk_bus0_pll_out_p, MUX_SEL_TOPC1, 16, 1),
+
+	MUX(0, "mout_aclk_peris_66", mout_topc_group2, MUX_SEL_TOPC3, 24, 2),
+};
+
+static struct samsung_div_clock topc_div_clks[] __initdata = {
+	DIV(0, "dout_aclk_peris_66", "mout_aclk_peris_66", DIV_TOPC1, 24, 4),
+
+	DIV(0, "dout_sclk_bus0_pll", "mout_sclk_bus0_pll_out", DIV_TOPC3, 0, 3),
+	DIV(0, "dout_sclk_bus1_pll", "mout_bus1_pll_ctrl", DIV_TOPC3, 8, 3),
+	DIV(0, "dout_sclk_cc_pll", "mout_cc_pll_ctrl", DIV_TOPC3, 12, 3),
+	DIV(0, "dout_sclk_mfc_pll", "mout_mfc_pll_ctrl", DIV_TOPC3, 16, 3),
+};
+
+static struct samsung_gate_clock topc_gate_clks[] __initdata = {
+	GATE(ACLK_PERIS_66, "aclk_peris_66", "dout_aclk_peris_66",
+		ENABLE_ACLK_TOPC1, 24, 0, 0),
+
+	GATE(SCLK_CC_PLL_A, "sclk_cc_pll_a", "dout_sclk_cc_pll",
+		ENABLE_SCLK_TOPC1, 0, 0, 0),
+	GATE(SCLK_CC_PLL_B, "sclk_cc_pll_b", "dout_sclk_cc_pll",
+		ENABLE_SCLK_TOPC1, 1, 0, 0),
+	GATE(SCLK_BUS0_PLL_A, "sclk_bus0_pll_a", "dout_sclk_bus0_pll",
+		ENABLE_SCLK_TOPC1, 4, 0, 0),
+	GATE(SCLK_BUS0_PLL_B, "sclk_bus0_pll_b", "dout_sclk_bus0_pll",
+		ENABLE_SCLK_TOPC1, 5, 0, 0),
+	GATE(SCLK_BUS1_PLL_A, "sclk_bus1_pll_a", "dout_sclk_bus1_pll",
+		ENABLE_SCLK_TOPC1, 12, 0, 0),
+	GATE(SCLK_BUS1_PLL_B, "sclk_bus1_pll_b", "dout_sclk_bus1_pll",
+		ENABLE_SCLK_TOPC1, 13, 0, 0),
+	GATE(SCLK_MFC_PLL_A, "sclk_mfc_pll_a", "dout_sclk_mfc_pll",
+		ENABLE_SCLK_TOPC1, 16, 0, 0),
+	GATE(SCLK_MFC_PLL_B, "sclk_mfc_pll_b", "dout_sclk_mfc_pll",
+		ENABLE_SCLK_TOPC1, 17, 0, 0),
+};
+
+static struct samsung_pll_clock topc_pll_clks[] __initdata = {
+	PLL(pll_1451x, 0, "fout_bus0_pll", "fin_pll",
+		BUS0_PLL_LOCK, BUS0_PLL_CON0, NULL),
+	PLL(pll_1452x, 0, "fout_cc_pll", "fin_pll",
+		CC_PLL_LOCK, CC_PLL_CON0, NULL),
+	PLL(pll_1452x, 0, "fout_bus1_pll", "fin_pll",
+		BUS1_DPLL_LOCK, BUS1_DPLL_CON0, NULL),
+	PLL(pll_1452x, 0, "fout_mfc_pll", "fin_pll",
+		MFC_PLL_LOCK, MFC_PLL_CON0, NULL),
+	PLL(pll_1460x, 0, "fout_aud_pll", "fin_pll",
+		AUD_PLL_LOCK, AUD_PLL_CON0, NULL),
+};
+
+static void __init exynos7_clk_topc_init(struct device_node *np)
+{
+	struct exynos_cmu_info cmu = {0};
+
+	cmu.pll_clks = topc_pll_clks;
+	cmu.nr_pll_clks = ARRAY_SIZE(topc_pll_clks);
+	cmu.mux_clks = topc_mux_clks;
+	cmu.nr_mux_clks = ARRAY_SIZE(topc_mux_clks);
+	cmu.div_clks = topc_div_clks;
+	cmu.nr_div_clks = ARRAY_SIZE(topc_div_clks);
+	cmu.gate_clks = topc_gate_clks;
+	cmu.nr_gate_clks = ARRAY_SIZE(topc_gate_clks);
+	cmu.fixed_factor_clks = topc_fixed_factor_clks;
+	cmu.nr_fixed_factor_clks = ARRAY_SIZE(topc_fixed_factor_clks);
+	cmu.nr_clk_ids = TOPC_NR_CLK;
+	cmu.clk_regs = topc_clk_regs;
+	cmu.nr_clk_regs = ARRAY_SIZE(topc_clk_regs);
+
+	exynos_cmu_register_one(np, &cmu);
+}
+
+CLK_OF_DECLARE(exynos7_clk_topc, "samsung,exynos7-clock-topc",
+		exynos7_clk_topc_init);
+
+/* Register Offset definitions for CMU_TOP0 (0x105D0000) */
+#define MUX_SEL_TOP00			0x0200
+#define MUX_SEL_TOP01			0x0204
+#define MUX_SEL_TOP03			0x020C
+#define MUX_SEL_TOP0_PERIC3		0x023C
+#define DIV_TOP03			0x060C
+#define DIV_TOP0_PERIC3			0x063C
+#define ENABLE_ACLK_TOP03		0x080C
+#define ENABLE_SCLK_TOP0_PERIC3		0x0A3C
+
+/* List of parent clocks for Muxes in CMU_TOP0 */
+PNAME(mout_bus0_pll_p)	= { "fin_pll", "sclk_bus0_pll_a" };
+PNAME(mout_bus1_pll_p)	= { "fin_pll", "sclk_bus1_pll_a" };
+PNAME(mout_cc_pll_p)	= { "fin_pll", "sclk_cc_pll_a" };
+PNAME(mout_mfc_pll_p)	= { "fin_pll", "sclk_mfc_pll_a" };
+
+PNAME(mout_top0_half_bus0_pll_p) = {"mout_top0_bus0_pll",
+	"ffac_top0_bus0_pll_div2"};
+PNAME(mout_top0_half_bus1_pll_p) = {"mout_top0_bus1_pll",
+	"ffac_top0_bus1_pll_div2"};
+PNAME(mout_top0_half_cc_pll_p) = {"mout_top0_cc_pll",
+	"ffac_top0_cc_pll_div2"};
+PNAME(mout_top0_half_mfc_pll_p) = {"mout_top0_mfc_pll",
+	"ffac_top0_mfc_pll_div2"};
+
+PNAME(mout_top0_group1)	= {"mout_top0_half_bus0_pll",
+	"mout_top0_half_bus1_pll", "mout_top0_half_cc_pll",
+	"mout_top0_half_mfc_pll"};
+
+static unsigned long top0_clk_regs[] __initdata = {
+	MUX_SEL_TOP00,
+	MUX_SEL_TOP01,
+	MUX_SEL_TOP03,
+	MUX_SEL_TOP0_PERIC3,
+	DIV_TOP03,
+	DIV_TOP0_PERIC3,
+	ENABLE_ACLK_TOP03,
+	ENABLE_SCLK_TOP0_PERIC3,
+};
+
+static struct samsung_mux_clock top0_mux_clks[] __initdata = {
+	MUX(0, "mout_top0_mfc_pll", mout_mfc_pll_p, MUX_SEL_TOP00, 4, 1),
+	MUX(0, "mout_top0_cc_pll", mout_cc_pll_p, MUX_SEL_TOP00, 8, 1),
+	MUX(0, "mout_top0_bus1_pll", mout_bus1_pll_p, MUX_SEL_TOP00, 12, 1),
+	MUX(0, "mout_top0_bus0_pll", mout_bus0_pll_p, MUX_SEL_TOP00, 16, 1),
+
+	MUX(0, "mout_top0_half_mfc_pll",
+			mout_top0_half_mfc_pll_p, MUX_SEL_TOP01, 4, 1),
+	MUX(0, "mout_top0_half_cc_pll",
+			mout_top0_half_cc_pll_p, MUX_SEL_TOP01, 8, 1),
+	MUX(0, "mout_top0_half_bus1_pll",
+			mout_top0_half_bus1_pll_p, MUX_SEL_TOP01, 12, 1),
+	MUX(0, "mout_top0_half_bus0_pll",
+			mout_top0_half_bus0_pll_p, MUX_SEL_TOP01, 16, 1),
+
+	MUX(0, "mout_aclk_peric1_66", mout_top0_group1,	MUX_SEL_TOP03, 12, 2),
+	MUX(0, "mout_aclk_peric0_66", mout_top0_group1, MUX_SEL_TOP03, 20, 2),
+
+	MUX(0, "mout_sclk_uart3", mout_top0_group1, MUX_SEL_TOP0_PERIC3, 4, 2),
+	MUX(0, "mout_sclk_uart2", mout_top0_group1, MUX_SEL_TOP0_PERIC3, 8, 2),
+	MUX(0, "mout_sclk_uart1", mout_top0_group1, MUX_SEL_TOP0_PERIC3, 12, 2),
+	MUX(0, "mout_sclk_uart0", mout_top0_group1, MUX_SEL_TOP0_PERIC3, 16, 2),
+};
+
+static struct samsung_div_clock top0_div_clks[] __initdata = {
+	DIV(0, "dout_aclk_peric1_66", "mout_aclk_peric1_66", DIV_TOP03, 12, 6),
+	DIV(0, "dout_aclk_peric0_66", "mout_aclk_peric0_66", DIV_TOP03, 20, 6),
+
+	DIV(0, "dout_sclk_uart3", "mout_sclk_uart3", DIV_TOP0_PERIC3, 4, 4),
+	DIV(0, "dout_sclk_uart2", "mout_sclk_uart2", DIV_TOP0_PERIC3, 8, 4),
+	DIV(0, "dout_sclk_uart1", "mout_sclk_uart1", DIV_TOP0_PERIC3, 12, 4),
+	DIV(0, "dout_sclk_uart0", "mout_sclk_uart0", DIV_TOP0_PERIC3, 16, 4),
+};
+
+static struct samsung_gate_clock top0_gate_clks[] __initdata = {
+	GATE(CLK_ACLK_PERIC1_66, "aclk_peric1_66", "dout_aclk_peric1_66",
+			ENABLE_ACLK_TOP03, 12, 0, 0),
+	GATE(CLK_ACLK_PERIC0_66, "aclk_peric0_66", "dout_aclk_peric0_66",
+			ENABLE_ACLK_TOP03, 20, 0, 0),
+
+	GATE(CLK_SCLK_UART3, "sclk_uart3", "dout_sclk_uart3",
+			ENABLE_SCLK_TOP0_PERIC3, 4, 0, 0),
+	GATE(CLK_SCLK_UART2, "sclk_uart2", "dout_sclk_uart2",
+			ENABLE_SCLK_TOP0_PERIC3, 8, 0, 0),
+	GATE(CLK_SCLK_UART1, "sclk_uart1", "dout_sclk_uart1",
+			ENABLE_SCLK_TOP0_PERIC3, 12, 0, 0),
+	GATE(CLK_SCLK_UART0, "sclk_uart0", "dout_sclk_uart0",
+			ENABLE_SCLK_TOP0_PERIC3, 16, 0, 0),
+};
+
+static struct samsung_fixed_factor_clock top0_fixed_factor_clks[] __initdata = {
+	FFACTOR(0, "ffac_top0_bus0_pll_div2", "mout_top0_bus0_pll", 1, 2, 0),
+	FFACTOR(0, "ffac_top0_bus1_pll_div2", "mout_top0_bus1_pll", 1, 2, 0),
+	FFACTOR(0, "ffac_top0_cc_pll_div2", "mout_top0_cc_pll", 1, 2, 0),
+	FFACTOR(0, "ffac_top0_mfc_pll_div2", "mout_top0_mfc_pll", 1, 2, 0),
+};
+
+static void __init exynos7_clk_top0_init(struct device_node *np)
+{
+	struct exynos_cmu_info cmu = {0};
+
+	cmu.mux_clks = top0_mux_clks;
+	cmu.nr_mux_clks = ARRAY_SIZE(top0_mux_clks);
+	cmu.div_clks = top0_div_clks;
+	cmu.nr_div_clks = ARRAY_SIZE(top0_div_clks);
+	cmu.gate_clks = top0_gate_clks;
+	cmu.nr_gate_clks = ARRAY_SIZE(top0_gate_clks);
+	cmu.fixed_factor_clks = top0_fixed_factor_clks;
+	cmu.nr_fixed_factor_clks = ARRAY_SIZE(top0_fixed_factor_clks);
+	cmu.nr_clk_ids = TOP0_NR_CLK;
+	cmu.clk_regs = top0_clk_regs;
+	cmu.nr_clk_regs = ARRAY_SIZE(top0_clk_regs);
+
+	exynos_cmu_register_one(np, &cmu);
+}
+
+CLK_OF_DECLARE(exynos7_clk_top0, "samsung,exynos7-clock-top0",
+		exynos7_clk_top0_init);
+
+/* Register Offset definitions for CMU_PERIC0 (0x13610000) */
+#define MUX_SEL_PERIC0			0x0200
+#define ENABLE_PCLK_PERIC0		0x0900
+#define ENABLE_SCLK_PERIC0		0x0A00
+
+/* List of parent clocks for Muxes in CMU_PERIC0 */
+PNAME(mout_aclk_peric0_66_p)	= { "fin_pll", "aclk_peric0_66" };
+PNAME(mout_sclk_uart0_p)	= { "fin_pll", "sclk_uart0" };
+
+static unsigned long peric0_clk_regs[] __initdata = {
+	MUX_SEL_PERIC0,
+	ENABLE_PCLK_PERIC0,
+	ENABLE_SCLK_PERIC0,
+};
+
+static struct samsung_mux_clock peric0_mux_clks[] __initdata = {
+	MUX(0, "mout_aclk_peric0_66_user",
+			mout_aclk_peric0_66_p, MUX_SEL_PERIC0, 0, 1),
+	MUX(0, "mout_sclk_uart0_user", mout_sclk_uart0_p,
+			MUX_SEL_PERIC0, 16, 1),
+};
+
+static struct samsung_gate_clock peric0_gate_clks[] __initdata = {
+	GATE(PCLK_UART0, "pclk_uart0", "mout_aclk_peric0_66_user",
+			ENABLE_PCLK_PERIC0, 16, 0, 0),
+
+	GATE(SCLK_UART0, "sclk_uart0_user", "mout_sclk_uart0_user",
+			ENABLE_SCLK_PERIC0, 16, 0, 0),
+};
+
+static void __init exynos7_clk_peric0_init(struct device_node *np)
+{
+	struct exynos_cmu_info cmu = {0};
+
+	cmu.mux_clks = peric0_mux_clks;
+	cmu.nr_mux_clks = ARRAY_SIZE(peric0_mux_clks);
+	cmu.gate_clks = peric0_gate_clks;
+	cmu.nr_gate_clks = ARRAY_SIZE(peric0_gate_clks);
+	cmu.nr_clk_ids = PERIC0_NR_CLK;
+	cmu.clk_regs = peric0_clk_regs;
+	cmu.nr_clk_regs = ARRAY_SIZE(peric0_clk_regs);
+
+	exynos_cmu_register_one(np, &cmu);
+}
+
+/* Register Offset definitions for CMU_PERIC1 (0x14C80000) */
+#define MUX_SEL_PERIC10			0x0200
+#define MUX_SEL_PERIC11			0x0204
+#define ENABLE_PCLK_PERIC1		0x0900
+#define ENABLE_SCLK_PERIC10		0x0A00
+
+CLK_OF_DECLARE(exynos7_clk_peric0, "samsung,exynos7-clock-peric0",
+		exynos7_clk_peric0_init);
+
+/* List of parent clocks for Muxes in CMU_PERIC1 */
+PNAME(mout_aclk_peric1_66_p)	= { "fin_pll", "aclk_peric1_66" };
+PNAME(mout_sclk_uart1_p)	= { "fin_pll", "sclk_uart1" };
+PNAME(mout_sclk_uart2_p)	= { "fin_pll", "sclk_uart2" };
+PNAME(mout_sclk_uart3_p)	= { "fin_pll", "sclk_uart3" };
+
+static unsigned long peric1_clk_regs[] __initdata = {
+	MUX_SEL_PERIC10,
+	MUX_SEL_PERIC11,
+	ENABLE_PCLK_PERIC1,
+	ENABLE_SCLK_PERIC10,
+};
+
+static struct samsung_mux_clock peric1_mux_clks[] __initdata = {
+	MUX(0, "mout_aclk_peric1_66_user",
+		mout_aclk_peric1_66_p, MUX_SEL_PERIC10, 0, 1),
+
+	MUX(0, "mout_sclk_uart1_user", mout_sclk_uart1_p,
+			MUX_SEL_PERIC11, 20, 1),
+	MUX(0, "mout_sclk_uart2_user", mout_sclk_uart2_p,
+			MUX_SEL_PERIC11, 24, 1),
+	MUX(0, "mout_sclk_uart3_user", mout_sclk_uart3_p,
+			MUX_SEL_PERIC11, 28, 1),
+};
+
+static struct samsung_gate_clock peric1_gate_clks[] __initdata = {
+	GATE(PCLK_UART1, "pclk_uart1", "mout_aclk_peric1_66_user",
+			ENABLE_PCLK_PERIC1, 9, 0, 0),
+	GATE(PCLK_UART2, "pclk_uart2", "mout_aclk_peric1_66_user",
+			ENABLE_PCLK_PERIC1, 10, 0, 0),
+	GATE(PCLK_UART3, "pclk_uart3", "mout_aclk_peric1_66_user",
+			ENABLE_PCLK_PERIC1, 11, 0, 0),
+
+	GATE(SCLK_UART1, "sclk_uart1_user", "mout_sclk_uart1_user",
+			ENABLE_SCLK_PERIC10, 9, 0, 0),
+	GATE(SCLK_UART2, "sclk_uart2_user", "mout_sclk_uart2_user",
+			ENABLE_SCLK_PERIC10, 10, 0, 0),
+	GATE(SCLK_UART3, "sclk_uart3_user", "mout_sclk_uart3_user",
+			ENABLE_SCLK_PERIC10, 11, 0, 0),
+};
+
+static void __init exynos7_clk_peric1_init(struct device_node *np)
+{
+	struct exynos_cmu_info cmu = {0};
+
+	cmu.mux_clks = peric1_mux_clks;
+	cmu.nr_mux_clks = ARRAY_SIZE(peric1_mux_clks);
+	cmu.gate_clks = peric1_gate_clks;
+	cmu.nr_gate_clks = ARRAY_SIZE(peric1_gate_clks);
+	cmu.nr_clk_ids = PERIC1_NR_CLK;
+	cmu.clk_regs = peric1_clk_regs;
+	cmu.nr_clk_regs = ARRAY_SIZE(peric1_clk_regs);
+
+	exynos_cmu_register_one(np, &cmu);
+}
+
+CLK_OF_DECLARE(exynos7_clk_peric1, "samsung,exynos7-clock-peric1",
+		exynos7_clk_peric1_init);
+
+/* Register Offset definitions for CMU_PERIS (0x10040000) */
+#define MUX_SEL_PERIS			0x0200
+#define ENABLE_PCLK_PERIS_SECURE_CHIPID	0x0910
+#define ENABLE_SCLK_PERIS_SECURE_CHIPID	0x0A10
+
+/* List of parent clocks for Muxes in CMU_PERIS */
+PNAME(mout_aclk_peris_66_p)	= { "fin_pll", "aclk_peris_66" };
+
+static unsigned long peris_clk_regs[] __initdata = {
+	MUX_SEL_PERIS,
+	ENABLE_PCLK_PERIS_SECURE_CHIPID,
+	ENABLE_SCLK_PERIS_SECURE_CHIPID,
+};
+
+static struct samsung_mux_clock peris_mux_clks[] __initdata = {
+	MUX(0, "mout_aclk_peris_66_user",
+		mout_aclk_peris_66_p, MUX_SEL_PERIS, 0, 1),
+};
+
+static struct samsung_gate_clock peris_gate_clks[] __initdata = {
+	GATE(PCLK_CHIPID, "pclk_chipid", "mout_aclk_peris_66_user",
+			ENABLE_PCLK_PERIS_SECURE_CHIPID, 0, 0, 0),
+	GATE(SCLK_CHIPID, "sclk_chipid", "fin_pll",
+			ENABLE_SCLK_PERIS_SECURE_CHIPID, 0, 0, 0),
+};
+
+static void __init exynos7_clk_peris_init(struct device_node *np)
+{
+	struct exynos_cmu_info cmu = {0};
+
+	cmu.mux_clks = peris_mux_clks;
+	cmu.nr_mux_clks = ARRAY_SIZE(peris_mux_clks);
+	cmu.gate_clks = peris_gate_clks;
+	cmu.nr_gate_clks = ARRAY_SIZE(peris_gate_clks);
+	cmu.nr_clk_ids = PERIS_NR_CLK;
+	cmu.clk_regs = peris_clk_regs;
+	cmu.nr_clk_regs = ARRAY_SIZE(peris_clk_regs);
+
+	exynos_cmu_register_one(np, &cmu);
+}
+
+CLK_OF_DECLARE(exynos7_clk_peris, "samsung,exynos7-clock-peris",
+		exynos7_clk_peris_init);
diff --git a/include/dt-bindings/clock/exynos7-clk.h b/include/dt-bindings/clock/exynos7-clk.h
new file mode 100644
index 0000000..6fb8d23
--- /dev/null
+++ b/include/dt-bindings/clock/exynos7-clk.h
@@ -0,0 +1,55 @@
+/*
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ * Author: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef _DT_BINDINGS_CLOCK_EXYNOS7_H
+#define _DT_BINDINGS_CLOCK_EXYNOS7_H
+
+/* TOPC */
+#define ACLK_PERIS_66			1
+#define SCLK_CC_PLL_A			2
+#define SCLK_CC_PLL_B			3
+#define SCLK_BUS0_PLL_A			4
+#define SCLK_BUS0_PLL_B			5
+#define SCLK_BUS1_PLL_A			6
+#define SCLK_BUS1_PLL_B			7
+#define SCLK_MFC_PLL_A			8
+#define SCLK_MFC_PLL_B			9
+#define PERIS_66			10
+#define TOPC_NR_CLK			11
+
+/* TOP0 */
+#define CLK_ACLK_PERIC1_66		1
+#define CLK_ACLK_PERIC0_66		2
+#define CLK_SCLK_UART0			3
+#define CLK_SCLK_UART1			4
+#define CLK_SCLK_UART2			5
+#define CLK_SCLK_UART3			6
+#define TOP_PERIC			7
+#define TOP0_NR_CLK			8
+
+/* PERIC0 */
+#define PCLK_UART0			1
+#define SCLK_UART0			2
+#define PERIC0_NR_CLK			3
+
+/* PERIC1 */
+#define PCLK_UART1			1
+#define PCLK_UART2			2
+#define PCLK_UART3			3
+#define SCLK_UART1			4
+#define SCLK_UART2			5
+#define SCLK_UART3			6
+#define PERIC1_NR_CLK			7
+
+/* PERIS */
+#define PCLK_CHIPID		        1
+#define SCLK_CHIPID			2
+#define PERIS_NR_CLK			3
+
+#endif /* _DT_BINDINGS_CLOCK_EXYNOS7_H */
-- 
1.7.9.5

^ permalink raw reply related	[flat|nested] 11+ messages in thread

* [PATCH v3 5/8] arm64: dts: Add initial device tree support for EXYNOS7
  2014-09-11 10:20 [PATCH v3 0/8] arch: arm64: enable support for Samsung Exynos7 SoC Naveen Krishna Chatradhi
                   ` (3 preceding siblings ...)
  2014-09-11 10:20 ` [PATCH v3 4/8] clk: samsung: add initial clock support for Exynos7 SoC Naveen Krishna Chatradhi
@ 2014-09-11 10:20 ` Naveen Krishna Chatradhi
  2014-09-11 10:41   ` Arnd Bergmann
  2014-09-11 10:20 ` [PATCH v3 6/8] arm64: exynos7: Enable ARMv8 based Exynos7 (SoC) support Naveen Krishna Chatradhi
                   ` (2 subsequent siblings)
  7 siblings, 1 reply; 11+ messages in thread
From: Naveen Krishna Chatradhi @ 2014-09-11 10:20 UTC (permalink / raw)
  To: linux-arm-kernel
  Cc: naveenkrishna.ch, linux-samsung-soc, catalin.marinas, robh,
	devicetree, tomasz.figa, kgene.kim

Add initial device tree nodes for EXYNOS7 SoC and board dts file
to support Espresso board based on Exynos7 SoC.

Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm64/boot/dts/Makefile                    |    1 +
 arch/arm64/boot/dts/exynos/exynos7-espresso.dts |   35 +++++
 arch/arm64/boot/dts/exynos/exynos7.dtsi         |  167 +++++++++++++++++++++++
 3 files changed, 203 insertions(+)
 create mode 100644 arch/arm64/boot/dts/exynos/exynos7-espresso.dts
 create mode 100644 arch/arm64/boot/dts/exynos/exynos7.dtsi

diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile
index c52bdb0..a3bc18a 100644
--- a/arch/arm64/boot/dts/Makefile
+++ b/arch/arm64/boot/dts/Makefile
@@ -1,3 +1,4 @@
+dtb-$(CONFIG_ARCH_EXYNOS7) += exynos/exynos7-espresso.dtb
 dtb-$(CONFIG_ARCH_VEXPRESS) += rtsm_ve-aemv8a.dtb foundation-v8.dtb
 dtb-$(CONFIG_ARCH_XGENE) += apm-mustang.dtb
 
diff --git a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
new file mode 100644
index 0000000..4f69991
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
@@ -0,0 +1,35 @@
+/*
+ * SAMSUNG Exynos7 Espresso board device tree source
+ *
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+#include "exynos7.dtsi"
+
+/ {
+	model = "Samsung Exynos7 Espresso board based on EXYNOS7";
+	compatible = "samsung,exynos7-espresso", "samsung,exynos7";
+
+	chosen {
+		linux,stdout-path = &serial_2;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0x0 0xC0000000>;
+	};
+};
+
+&fin_pll {
+	clock-frequency = <24000000>;
+};
+
+&serial_2 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi
new file mode 100644
index 0000000..56ec5f4
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi
@@ -0,0 +1,167 @@
+/*
+ * SAMSUNG EXYNOS7 SoC device tree source
+ *
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <dt-bindings/clock/exynos7-clk.h>
+
+/ {
+	compatible = "samsung,exynos7";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &serial_0;
+		serial1 = &serial_1;
+		serial2 = &serial_2;
+		serial3 = &serial_3;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57", "arm,armv8";
+			enable-method = "psci";
+			reg = <0x0>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57", "arm,armv8";
+			enable-method = "psci";
+			reg = <0x1>;
+		};
+
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57", "arm,armv8";
+			enable-method = "psci";
+			reg = <0x2>;
+		};
+
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57", "arm,armv8";
+			enable-method = "psci";
+			reg = <0x3>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0x18000000>;
+
+		chipid@10000000 {
+			compatible = "samsung,exynos4210-chipid";
+			reg = <0x10000000 0x100>;
+		};
+
+		fin_pll: xxti {
+			compatible = "fixed-clock";
+			clock-output-names = "fin_pll";
+			#clock-cells = <0>;
+		};
+
+		gic: interrupt-controller@11001000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg =	<0x11001000 0x1000>,
+				<0x11002000 0x1000>,
+				<0x11004000 0x2000>,
+				<0x11006000 0x2000>;
+		};
+
+		clock_topc: clock-controller@10570000 {
+			compatible = "samsung,exynos7-clock-topc";
+			reg = <0x10570000 0x10000>;
+			#clock-cells = <1>;
+		};
+
+		clock_top0: clock-controller@105d0000 {
+			compatible = "samsung,exynos7-clock-top0";
+			reg = <0x105d0000 0xb000>;
+			#clock-cells = <1>;
+		};
+
+		clock_peric0: clock-controller@13610000 {
+			compatible = "samsung,exynos7-clock-peric0";
+			reg = <0x13610000 0xd00>;
+			#clock-cells = <1>;
+		};
+
+		clock_peric1: clock-controller@14C80000 {
+			compatible = "samsung,exynos7-clock-peric1";
+			reg = <0x14c80000 0xd00>;
+			#clock-cells = <1>;
+		};
+
+		clock_peris: clock-controller@10040000 {
+			compatible = "samsung,exynos7-clock-peris";
+			reg = <0x10040000 0xd00>;
+			#clock-cells = <1>;
+		};
+
+		serial_0: serial@13630000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x13630000 0x100>;
+			interrupts = <0 440 0>;
+			clocks = <&clock_peric0 PCLK_UART0>, <&clock_peric0 SCLK_UART0>;
+			clock-names = "uart", "clk_uart_baud0";
+			status = "disabled";
+		};
+
+		serial_1: serial@14c20000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x14c20000 0x100>;
+			interrupts = <0 456 0>;
+			clocks = <&clock_peric1 PCLK_UART1>, <&clock_peric1 SCLK_UART1>;
+			clock-names = "uart", "clk_uart_baud0";
+			status = "disabled";
+		};
+
+		serial_2: serial@14c30000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x14c30000 0x100>;
+			interrupts = <0 457 0>;
+			clocks = <&clock_peric1 PCLK_UART2>, <&clock_peric1 SCLK_UART2>;
+			clock-names = "uart", "clk_uart_baud0";
+			status = "disabled";
+		};
+
+		serial_3: serial@14c40000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x14c40000 0x100>;
+			interrupts = <0 458 0>;
+			clocks = <&clock_peric1 PCLK_UART3>, <&clock_peric1 SCLK_UART3>;
+			clock-names = "uart", "clk_uart_baud0";
+			status = "disabled";
+		};
+
+		timer {
+			compatible = "arm,armv8-timer";
+			interrupts = <1 13 0xff01>,
+				     <1 14 0xff01>,
+				     <1 11 0xff01>,
+				     <1 10 0xff01>;
+		};
+	};
+};
-- 
1.7.9.5

^ permalink raw reply related	[flat|nested] 11+ messages in thread

* Re: [PATCH v3 5/8] arm64: dts: Add initial device tree support for EXYNOS7
  2014-09-11 10:20 ` [PATCH v3 5/8] arm64: dts: Add initial device tree support for EXYNOS7 Naveen Krishna Chatradhi
@ 2014-09-11 10:41   ` Arnd Bergmann
  2014-09-11 12:21     ` Naveen Krishna Ch
  0 siblings, 1 reply; 11+ messages in thread
From: Arnd Bergmann @ 2014-09-11 10:41 UTC (permalink / raw)
  To: linux-arm-kernel
  Cc: Naveen Krishna Chatradhi, devicetree, linux-samsung-soc, robh,
	catalin.marinas, tomasz.figa, kgene.kim, naveenkrishna.ch

On Thursday 11 September 2014 15:50:49 Naveen Krishna Chatradhi wrote:
> +       aliases {
> +               serial0 = &serial_0;
> +               serial1 = &serial_1;
> +               serial2 = &serial_2;
> +               serial3 = &serial_3;
> +       };
> +

Please move the aliases from the exynos7.dtsi file into the
exynos7-espresso.dts file, and only list the ones that are
present, starting with alias 0, like

	aliases {
		serial0 = &serial_2;
	};

If the machine has only one serial port, it should be the first
alias.

	Arnd

^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: [PATCH v3 5/8] arm64: dts: Add initial device tree support for EXYNOS7
  2014-09-11 10:41   ` Arnd Bergmann
@ 2014-09-11 12:21     ` Naveen Krishna Ch
  0 siblings, 0 replies; 11+ messages in thread
From: Naveen Krishna Ch @ 2014-09-11 12:21 UTC (permalink / raw)
  To: Arnd Bergmann
  Cc: linux-arm-kernel@lists.infradead.org, Naveen Krishna Chatradhi,
	devicetree, linux-samsung-soc@vger.kernel.org, robh,
	catalin.marinas, tomasz.figa, Kukjin Kim

On 11 September 2014 16:11, Arnd Bergmann <arnd@arndb.de> wrote:
> On Thursday 11 September 2014 15:50:49 Naveen Krishna Chatradhi wrote:
>> +       aliases {
>> +               serial0 = &serial_0;
>> +               serial1 = &serial_1;
>> +               serial2 = &serial_2;
>> +               serial3 = &serial_3;
>> +       };
>> +
>
> Please move the aliases from the exynos7.dtsi file into the
> exynos7-espresso.dts file, and only list the ones that are
> present, starting with alias 0, like
>
>         aliases {
>                 serial0 = &serial_2;
>         };
>
> If the machine has only one serial port, it should be the first
> alias.

Okay, will fix this in the next version.

>
>         Arnd

Thanks,
-- 
Shine bright,
(: Nav :)

^ permalink raw reply	[flat|nested] 11+ messages in thread

* [PATCH v3 6/8] arm64: exynos7: Enable ARMv8 based Exynos7 (SoC) support
  2014-09-11 10:20 [PATCH v3 0/8] arch: arm64: enable support for Samsung Exynos7 SoC Naveen Krishna Chatradhi
                   ` (4 preceding siblings ...)
  2014-09-11 10:20 ` [PATCH v3 5/8] arm64: dts: Add initial device tree support for EXYNOS7 Naveen Krishna Chatradhi
@ 2014-09-11 10:20 ` Naveen Krishna Chatradhi
  2014-09-11 10:20 ` [PATCH v3 7/8] tty/serial: samsung: enable usage for 64-bit Exynos platforms Naveen Krishna Chatradhi
       [not found] ` <1410430852-3491-1-git-send-email-ch.naveen-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
  7 siblings, 0 replies; 11+ messages in thread
From: Naveen Krishna Chatradhi @ 2014-09-11 10:20 UTC (permalink / raw)
  To: linux-arm-kernel
  Cc: naveenkrishna.ch, linux-samsung-soc, catalin.marinas, robh,
	devicetree, tomasz.figa, kgene.kim, Alim Akhtar

From: Alim Akhtar <alim.akhtar@samsung.com>

This patch adds the necessary Kconfig entries to enable
support for the ARMv8 based Exynos7 SoC.

Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm64/Kconfig |   12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index fd4e81a..b4d1dc2 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -134,6 +134,18 @@ source "kernel/Kconfig.freezer"
 
 menu "Platform selection"
 
+config ARCH_EXYNOS
+	bool
+	help
+	  This enables support for Samsung Exynos SoC family
+
+config ARCH_EXYNOS7
+	bool "ARMv8 based Samsung Exynos7"
+	select ARCH_EXYNOS
+	select COMMON_CLK_SAMSUNG
+	help
+	  This enables support for Samsung Exynos7 SoC family
+
 config ARCH_VEXPRESS
 	bool "ARMv8 software model (Versatile Express)"
 	select ARCH_REQUIRE_GPIOLIB
-- 
1.7.9.5

^ permalink raw reply related	[flat|nested] 11+ messages in thread

* [PATCH v3 7/8] tty/serial: samsung: enable usage for 64-bit Exynos platforms
  2014-09-11 10:20 [PATCH v3 0/8] arch: arm64: enable support for Samsung Exynos7 SoC Naveen Krishna Chatradhi
                   ` (5 preceding siblings ...)
  2014-09-11 10:20 ` [PATCH v3 6/8] arm64: exynos7: Enable ARMv8 based Exynos7 (SoC) support Naveen Krishna Chatradhi
@ 2014-09-11 10:20 ` Naveen Krishna Chatradhi
       [not found] ` <1410430852-3491-1-git-send-email-ch.naveen-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
  7 siblings, 0 replies; 11+ messages in thread
From: Naveen Krishna Chatradhi @ 2014-09-11 10:20 UTC (permalink / raw)
  To: linux-arm-kernel
  Cc: naveenkrishna.ch, linux-samsung-soc, catalin.marinas, robh,
	devicetree, tomasz.figa, kgene.kim, Greg Kroah-Hartman

Allow Samsung serial driver to be usable on Exynos 64-bit SoC based
platforms.

Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/Kconfig |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 26cec64..3383744 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -220,7 +220,7 @@ config SERIAL_CLPS711X_CONSOLE
 
 config SERIAL_SAMSUNG
 	tristate "Samsung SoC serial support"
-	depends on PLAT_SAMSUNG
+	depends on PLAT_SAMSUNG || ARCH_EXYNOS
 	select SERIAL_CORE
 	help
 	  Support for the on-chip UARTs on the Samsung S3C24XX series CPUs,
-- 
1.7.9.5

^ permalink raw reply related	[flat|nested] 11+ messages in thread

[parent not found: <1410430852-3491-1-git-send-email-ch.naveen-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>]

* [PATCH v3 8/8] arm64: dts: add <dt-bindings/> symlink
       [not found] ` <1410430852-3491-1-git-send-email-ch.naveen-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
@ 2014-09-11 10:20   ` Naveen Krishna Chatradhi
  0 siblings, 0 replies; 11+ messages in thread
From: Naveen Krishna Chatradhi @ 2014-09-11 10:20 UTC (permalink / raw)
  To: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
  Cc: naveenkrishna.ch-Re5JQEeQqe8AvxtiuMwx3w,
	linux-samsung-soc-u79uwXL29TY76Z2rM5mHXA,
	catalin.marinas-5wv7dgnIgG8, robh-DgEjT+Ai2ygdnm+yROfE0A,
	devicetree-u79uwXL29TY76Z2rM5mHXA,
	tomasz.figa-Re5JQEeQqe8AvxtiuMwx3w,
	kgene.kim-Sze3O3UU22JBDgjK7y7TUQ, Pankaj Dubey

From: Pankaj Dubey <pankaj.dubey-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>

Add symlink to include/dt-bindings from arch/arm64/boot/dts/include/ to
match the ones in ARM architectures so that preprocessed device
tree files can include various useful constant definitions.

See commit c58299aa8754 ("kbuild: create an "include chroot" for DT bindings")
merged in v3.10-rc1 for details.

CC: Catalin Marinas <catalin.marinas-5wv7dgnIgG8@public.gmane.org>
Signed-off-by: Pankaj Dubey <pankaj.dubey-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
---
 arch/arm64/boot/dts/include/dt-bindings |    1 +
 1 file changed, 1 insertion(+)
 create mode 120000 arch/arm64/boot/dts/include/dt-bindings

diff --git a/arch/arm64/boot/dts/include/dt-bindings b/arch/arm64/boot/dts/include/dt-bindings
new file mode 120000
index 0000000..08c00e4
--- /dev/null
+++ b/arch/arm64/boot/dts/include/dt-bindings
@@ -0,0 +1 @@
+../../../../../include/dt-bindings
\ No newline at end of file
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply related	[flat|nested] 11+ messages in thread

end of thread, other threads:[~2014-09-11 12:21 UTC | newest]

Thread overview: 11+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-09-11 10:20 [PATCH v3 0/8] arch: arm64: enable support for Samsung Exynos7 SoC Naveen Krishna Chatradhi
2014-09-11 10:20 ` [PATCH v3 1/8] clk: samsung: add support for 145xx and 1460x PLLs Naveen Krishna Chatradhi
2014-09-11 10:20 ` [PATCH v3 2/8] clk: samsung: Factor out the common code to clk.c Naveen Krishna Chatradhi
2014-09-11 10:20 ` [PATCH v3 3/8] clk: samsung: Add fixed_factor_clocks field to struct exynos_cmu_info Naveen Krishna Chatradhi
2014-09-11 10:20 ` [PATCH v3 4/8] clk: samsung: add initial clock support for Exynos7 SoC Naveen Krishna Chatradhi
2014-09-11 10:20 ` [PATCH v3 5/8] arm64: dts: Add initial device tree support for EXYNOS7 Naveen Krishna Chatradhi
2014-09-11 10:41   ` Arnd Bergmann
2014-09-11 12:21     ` Naveen Krishna Ch
2014-09-11 10:20 ` [PATCH v3 6/8] arm64: exynos7: Enable ARMv8 based Exynos7 (SoC) support Naveen Krishna Chatradhi
2014-09-11 10:20 ` [PATCH v3 7/8] tty/serial: samsung: enable usage for 64-bit Exynos platforms Naveen Krishna Chatradhi
     [not found] ` <1410430852-3491-1-git-send-email-ch.naveen-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2014-09-11 10:20   ` [PATCH v3 8/8] arm64: dts: add <dt-bindings/> symlink Naveen Krishna Chatradhi

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).