From: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
To: horms@verge.net.au, Olof Johansson <olof@lixom.net>
Cc: linux-sh@vger.kernel.org, devicetree@vger.kernel.org,
magnus.damm@gmail.com,
Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Subject: [PATCH 1/6] ARM: shmobile: r7s72100: sort dtsi file by address
Date: Fri, 12 Sep 2014 10:51:11 +0200 [thread overview]
Message-ID: <1410511876-9235-2-git-send-email-ulrich.hecht+renesas@gmail.com> (raw)
In-Reply-To: <1410511876-9235-1-git-send-email-ulrich.hecht+renesas@gmail.com>
Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
---
arch/arm/boot/dts/r7s72100.dtsi | 202 ++++++++++++++++++++--------------------
1 file changed, 101 insertions(+), 101 deletions(-)
diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi
index 1d28d01..6a0e57e 100644
--- a/arch/arm/boot/dts/r7s72100.dtsi
+++ b/arch/arm/boot/dts/r7s72100.dtsi
@@ -52,16 +52,6 @@
clock-output-names = "usb_x1";
};
- /* Special CPG clocks */
- cpg_clocks: cpg_clocks@fcfe0000 {
- #clock-cells = <1>;
- compatible = "renesas,r7s72100-cpg-clocks",
- "renesas,rz-cpg-clocks";
- reg = <0xfcfe0000 0x18>;
- clocks = <&extal_clk>, <&usb_x1_clk>;
- clock-output-names = "pll", "i", "g";
- };
-
/* Fixed factor clocks */
b_clk: b_clk {
#clock-cells = <0>;
@@ -88,6 +78,16 @@
clock-output-names = "p0";
};
+ /* Special CPG clocks */
+ cpg_clocks: cpg_clocks@fcfe0000 {
+ #clock-cells = <1>;
+ compatible = "renesas,r7s72100-cpg-clocks",
+ "renesas,rz-cpg-clocks";
+ reg = <0xfcfe0000 0x18>;
+ clocks = <&extal_clk>, <&usb_x1_clk>;
+ clock-output-names = "pll", "i", "g";
+ };
+
/* MSTP clocks */
mstp3_clks: mstp3_clks@fcfe0420 {
#clock-cells = <1>;
@@ -148,97 +148,6 @@
};
};
- gic: interrupt-controller@e8201000 {
- compatible = "arm,cortex-a9-gic";
- #interrupt-cells = <3>;
- #address-cells = <0>;
- interrupt-controller;
- reg = <0xe8201000 0x1000>,
- <0xe8202000 0x1000>;
- };
-
- i2c0: i2c@fcfee000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "renesas,riic-r7s72100", "renesas,riic-rz";
- reg = <0xfcfee000 0x44>;
- interrupts = <0 157 IRQ_TYPE_LEVEL_HIGH>,
- <0 158 IRQ_TYPE_EDGE_RISING>,
- <0 159 IRQ_TYPE_EDGE_RISING>,
- <0 160 IRQ_TYPE_LEVEL_HIGH>,
- <0 161 IRQ_TYPE_LEVEL_HIGH>,
- <0 162 IRQ_TYPE_LEVEL_HIGH>,
- <0 163 IRQ_TYPE_LEVEL_HIGH>,
- <0 164 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp9_clks R7S72100_CLK_I2C0>;
- clock-frequency = <100000>;
- status = "disabled";
- };
-
- i2c1: i2c@fcfee400 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "renesas,riic-r7s72100", "renesas,riic-rz";
- reg = <0xfcfee400 0x44>;
- interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>,
- <0 166 IRQ_TYPE_EDGE_RISING>,
- <0 167 IRQ_TYPE_EDGE_RISING>,
- <0 168 IRQ_TYPE_LEVEL_HIGH>,
- <0 169 IRQ_TYPE_LEVEL_HIGH>,
- <0 170 IRQ_TYPE_LEVEL_HIGH>,
- <0 171 IRQ_TYPE_LEVEL_HIGH>,
- <0 172 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp9_clks R7S72100_CLK_I2C1>;
- clock-frequency = <100000>;
- status = "disabled";
- };
-
- i2c2: i2c@fcfee800 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "renesas,riic-r7s72100", "renesas,riic-rz";
- reg = <0xfcfee800 0x44>;
- interrupts = <0 173 IRQ_TYPE_LEVEL_HIGH>,
- <0 174 IRQ_TYPE_EDGE_RISING>,
- <0 175 IRQ_TYPE_EDGE_RISING>,
- <0 176 IRQ_TYPE_LEVEL_HIGH>,
- <0 177 IRQ_TYPE_LEVEL_HIGH>,
- <0 178 IRQ_TYPE_LEVEL_HIGH>,
- <0 179 IRQ_TYPE_LEVEL_HIGH>,
- <0 180 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp9_clks R7S72100_CLK_I2C2>;
- clock-frequency = <100000>;
- status = "disabled";
- };
-
- i2c3: i2c@fcfeec00 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "renesas,riic-r7s72100", "renesas,riic-rz";
- reg = <0xfcfeec00 0x44>;
- interrupts = <0 181 IRQ_TYPE_LEVEL_HIGH>,
- <0 182 IRQ_TYPE_EDGE_RISING>,
- <0 183 IRQ_TYPE_EDGE_RISING>,
- <0 184 IRQ_TYPE_LEVEL_HIGH>,
- <0 185 IRQ_TYPE_LEVEL_HIGH>,
- <0 186 IRQ_TYPE_LEVEL_HIGH>,
- <0 187 IRQ_TYPE_LEVEL_HIGH>,
- <0 188 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp9_clks R7S72100_CLK_I2C3>;
- clock-frequency = <100000>;
- status = "disabled";
- };
-
- mtu2: timer@fcff0000 {
- compatible = "renesas,mtu2";
- reg = <0xfcff0000 0x400>;
- interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "tgi0a";
- clocks = <&mstp3_clks R7S72100_CLK_MTU2>;
- clock-names = "fck";
- status = "disabled";
- };
-
scif0: serial@e8007000 {
compatible = "renesas,scif-r7s72100", "renesas,scif";
reg = <0xe8007000 64>;
@@ -404,4 +313,95 @@
#size-cells = <0>;
status = "disabled";
};
+
+ gic: interrupt-controller@e8201000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0xe8201000 0x1000>,
+ <0xe8202000 0x1000>;
+ };
+
+ i2c0: i2c@fcfee000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,riic-r7s72100", "renesas,riic-rz";
+ reg = <0xfcfee000 0x44>;
+ interrupts = <0 157 IRQ_TYPE_LEVEL_HIGH>,
+ <0 158 IRQ_TYPE_EDGE_RISING>,
+ <0 159 IRQ_TYPE_EDGE_RISING>,
+ <0 160 IRQ_TYPE_LEVEL_HIGH>,
+ <0 161 IRQ_TYPE_LEVEL_HIGH>,
+ <0 162 IRQ_TYPE_LEVEL_HIGH>,
+ <0 163 IRQ_TYPE_LEVEL_HIGH>,
+ <0 164 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R7S72100_CLK_I2C0>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@fcfee400 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,riic-r7s72100", "renesas,riic-rz";
+ reg = <0xfcfee400 0x44>;
+ interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>,
+ <0 166 IRQ_TYPE_EDGE_RISING>,
+ <0 167 IRQ_TYPE_EDGE_RISING>,
+ <0 168 IRQ_TYPE_LEVEL_HIGH>,
+ <0 169 IRQ_TYPE_LEVEL_HIGH>,
+ <0 170 IRQ_TYPE_LEVEL_HIGH>,
+ <0 171 IRQ_TYPE_LEVEL_HIGH>,
+ <0 172 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R7S72100_CLK_I2C1>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@fcfee800 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,riic-r7s72100", "renesas,riic-rz";
+ reg = <0xfcfee800 0x44>;
+ interrupts = <0 173 IRQ_TYPE_LEVEL_HIGH>,
+ <0 174 IRQ_TYPE_EDGE_RISING>,
+ <0 175 IRQ_TYPE_EDGE_RISING>,
+ <0 176 IRQ_TYPE_LEVEL_HIGH>,
+ <0 177 IRQ_TYPE_LEVEL_HIGH>,
+ <0 178 IRQ_TYPE_LEVEL_HIGH>,
+ <0 179 IRQ_TYPE_LEVEL_HIGH>,
+ <0 180 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R7S72100_CLK_I2C2>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@fcfeec00 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,riic-r7s72100", "renesas,riic-rz";
+ reg = <0xfcfeec00 0x44>;
+ interrupts = <0 181 IRQ_TYPE_LEVEL_HIGH>,
+ <0 182 IRQ_TYPE_EDGE_RISING>,
+ <0 183 IRQ_TYPE_EDGE_RISING>,
+ <0 184 IRQ_TYPE_LEVEL_HIGH>,
+ <0 185 IRQ_TYPE_LEVEL_HIGH>,
+ <0 186 IRQ_TYPE_LEVEL_HIGH>,
+ <0 187 IRQ_TYPE_LEVEL_HIGH>,
+ <0 188 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R7S72100_CLK_I2C3>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
+
+ mtu2: timer@fcff0000 {
+ compatible = "renesas,mtu2";
+ reg = <0xfcff0000 0x400>;
+ interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tgi0a";
+ clocks = <&mstp3_clks R7S72100_CLK_MTU2>;
+ clock-names = "fck";
+ status = "disabled";
+ };
};
--
1.8.4.5
next prev parent reply other threads:[~2014-09-12 8:51 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-12 8:51 [PATCH 0/6] ARM: shmobile: various DT files sorted by address Ulrich Hecht
2014-09-12 8:51 ` Ulrich Hecht [this message]
2014-09-16 0:49 ` [PATCH 1/6] ARM: shmobile: r7s72100: sort dtsi file " Simon Horman
2014-09-12 8:51 ` [PATCH 2/6] ARM: shmobile: emev2: " Ulrich Hecht
2014-09-16 0:46 ` Simon Horman
2014-09-12 8:51 ` [PATCH 3/6] ARM: shmobile: kzm9d: sort dts " Ulrich Hecht
2014-09-12 8:58 ` Geert Uytterhoeven
2014-09-16 0:45 ` Simon Horman
2014-09-12 8:51 ` [PATCH 4/6] ARM: shmobile: r8a73a4: sort dtsi " Ulrich Hecht
2014-09-12 9:01 ` Geert Uytterhoeven
2014-09-12 8:51 ` [PATCH 5/6] ARM: shmobile: ape6evm: sort dts " Ulrich Hecht
2014-09-12 9:04 ` Geert Uytterhoeven
2014-09-12 8:51 ` [PATCH 6/6] ARM: shmobile: ape6evm-reference: " Ulrich Hecht
2014-09-16 0:46 ` Simon Horman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1410511876-9235-2-git-send-email-ulrich.hecht+renesas@gmail.com \
--to=ulrich.hecht+renesas@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=horms@verge.net.au \
--cc=linux-sh@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=olof@lixom.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).