From mboxrd@z Thu Jan  1 00:00:00 1970
From: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Subject: Re: [PATCH] ARM: dts: Add Maxim 77693 PMIC to the Trats2 board
Date: Mon, 15 Sep 2014 16:56:06 +0200
Message-ID: <1410792966.883.2.camel@AMDC1943>
References: <1410523386-10581-1-git-send-email-k.kozlowski@samsung.com>
 <CABxcv=mYWDVwOWbvV4xy+xS5tQUrCexCT_LD7hgUO2d3FPe56w@mail.gmail.com>
Mime-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 7bit
Return-path: <linux-samsung-soc-owner@vger.kernel.org>
In-reply-to: <CABxcv=mYWDVwOWbvV4xy+xS5tQUrCexCT_LD7hgUO2d3FPe56w@mail.gmail.com>
Sender: linux-samsung-soc-owner@vger.kernel.org
To: Javier Martinez Canillas <javier@dowhile0.org>
Cc: Ben Dooks <ben-linux@fluff.org>, Kukjin Kim <kgene.kim@samsung.com>, Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>, Mark Rutland <mark.rutland@arm.com>, Ian Campbell <ijc+devicetree@hellion.org.uk>, Kumar Gala <galak@codeaurora.org>, Russell King <linux@arm.linux.org.uk>, "linux-arm-kernel@lists.infradead.org" <linux-arm-kernel@lists.infradead.org>, "linux-samsung-soc@vger.kernel.org" <linux-samsung-soc@vger.kernel.org>, "devicetree@vger.kernel.org" <devicetree@vger.kernel.org>, Linux Kernel <linux-kernel@vger.kernel.org>, Kyungmin Park <kyungmin.park@samsung.com>, Marek Szyprowski <m.szyprowski@samsung.com>, Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>, Tomasz Figa <tomasz.figa@gmail.com>
List-Id: devicetree@vger.kernel.org

On pon, 2014-09-15 at 16:36 +0200, Javier Martinez Canillas wrote:
> Hello Krzysztof,
> 
> On Fri, Sep 12, 2014 at 2:03 PM, Krzysztof Kozlowski
> <k.kozlowski@samsung.com> wrote:
> > +       i2c_max77693: i2c-gpio-1 {
> > +               compatible = "i2c-gpio";
> > +               gpios = <&gpm2 0 0>, <&gpm2 1 0 >;
> 
> Can you please include <dt-bindings/gpio/gpio.h> and use
> GPIO_ACTIVE_HIGH instead of 0 here for the type/level flags?

Sure!

> 
> > +               i2c-gpio,delay-us = <2>;
> > +               #address-cells = <1>;
> > +               #size-cells = <0>;
> > +               status = "okay";
> > +
> > +               max77693@66 {
> > +                       compatible = "maxim,max77693";
> > +                       interrupt-parent = <&gpx1>;
> > +                       interrupts = <5 2>;
> > +                       reg = <0x66>;
> > +
> > +                       regulators {
> > +                               esafeout1_reg: esafeout@1 {
> > +                                       regulator-compatible = "ESAFEOUT1";
> 
> According to Documentation/devicetree/bindings/regulator/regulator.txt,
> the "regulator-compatible" DT property has been deprecated in favor of
> just using the regulator node's name.

OK

> 
> > +                                       regulator-name = "ESAFEOUT1";
> > +                               };
> > +                               esafeout2_reg: esafeout@2 {
> > +                                       regulator-compatible = "ESAFEOUT2";
> > +                                       regulator-name = "ESAFEOUT2";
> > +                               };
> > +                               charger_reg: charger@0 {
> > +                                       regulator-compatible = "CHARGER";
> > +                                       regulator-name = "CHARGER";
> > +                                       regulator-min-microamp = <60000>;
> > +                                       regulator-max-microamp = <2580000>;
> > +                               };
> > +                       };
> > +               };
> > +       };
> > +
> >         mmc@12550000 {
> >                 num-slots = <1>;
> >                 supports-highspeed;
> >
> 
> Once those two issues are addressed, feel free to add my
> 
> Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>

Thank you for feedback!

Best regards,
Krzysztof

> 
> Best regards,
> Javier