From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
To: Kumar Gala <galak@codeaurora.org>
Cc: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-arm-msm@vger.kernel.org,
Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Subject: [PATCH] ARM: DT: apq8064: add support to sdcc4 for wlan.
Date: Wed, 17 Sep 2014 06:39:35 +0100 [thread overview]
Message-ID: <1410932375-4858-1-git-send-email-srinivas.kandagatla@linaro.org> (raw)
This patch adds sdcc4 node to enable wlan support on IFC6410
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
arch/arm/boot/dts/qcom-apq8064-ifc6410.dts | 4 ++++
arch/arm/boot/dts/qcom-apq8064.dtsi | 38 ++++++++++++++++++++++++++++++
2 files changed, 42 insertions(+)
diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
index 3287f12..a69a059 100644
--- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
@@ -28,6 +28,10 @@
sdcc3: sdcc@12180000 {
status = "okay";
};
+ /* WLAN */
+ sdcc4: sdcc@121c0000 {
+ status = "okay";
+ };
};
};
};
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index b1e476a..f31d20b 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -85,6 +85,13 @@
pinctrl-names = "default";
pinctrl-0 = <&ps_hold>;
+ sdc4_gpios: sdc4-gpios {
+ pios {
+ pins = "gpio63", "gpio64", "gpio65", "gpio66", "gpio67", "gpio68";
+ function = "sdc4";
+ };
+ };
+
ps_hold: ps_hold {
mux {
pins = "gpio78";
@@ -226,6 +233,16 @@
qcom,ee = <0>;
};
+ sdcc4bam:dma@121c2000{
+ compatible = "qcom,bam-v1.3.0";
+ reg = <0x121c2000 0x8000>;
+ interrupts = <0 95 0>;
+ clocks = <&gcc SDC4_H_CLK>;
+ clock-names = "bam_clk";
+ #dma-cells = <1>;
+ qcom,ee = <0>;
+ };
+
amba {
compatible = "arm,amba-bus";
#address-cells = <1>;
@@ -268,6 +285,27 @@
dmas = <&sdcc3bam 2>, <&sdcc3bam 1>;
dma-names = "tx", "rx";
};
+
+ sdcc4: sdcc@121c0000 {
+ compatible = "arm,pl18x", "arm,primecell";
+ arm,primecell-periphid = <0x00051180>;
+ status = "disabled";
+ reg = <0x121c0000 0x2000>;
+ interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "cmd_irq";
+ clocks = <&gcc SDC4_CLK>, <&gcc SDC4_H_CLK>;
+ clock-names = "mclk", "apb_pclk";
+ bus-width = <4>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ max-frequency = <48000000>;
+ vmmc-supply = <&vsdcc_fixed>;
+ vqmmc-supply = <&vsdcc_fixed>;
+ dmas = <&sdcc4bam 2>, <&sdcc4bam 1>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdc4_gpios>;
+ };
};
};
};
--
1.9.1
reply other threads:[~2014-09-17 5:39 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1410932375-4858-1-git-send-email-srinivas.kandagatla@linaro.org \
--to=srinivas.kandagatla@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=galak@codeaurora.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).