devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Beniamino Galvani <b.galvani@gmail.com>
To: netdev@vger.kernel.org
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>,
	"David S. Miller" <davem@davemloft.net>,
	Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>,
	Mark Rutland <mark.rutland@arm.com>,
	Ian Campbell <ijc+devicetree@hellion.org.uk>,
	Kumar Gala <galak@codeaurora.org>,
	Carlo Caione <carlo@caione.org>,
	Jerry Cao <jerry.cao@amlogic.com>,
	Victor Wan <victor.wan@amlogic.com>,
	linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
	Beniamino Galvani <b.galvani@gmail.com>
Subject: [PATCH 1/2] net: stmmac: add Amlogic Meson glue layer
Date: Sat, 20 Sep 2014 15:29:16 +0200	[thread overview]
Message-ID: <1411219757-9201-2-git-send-email-b.galvani@gmail.com> (raw)
In-Reply-To: <1411219757-9201-1-git-send-email-b.galvani@gmail.com>

The Ethernet controller available in Meson6 and Meson8 SoCs is a
Synopsys DesignWare MAC IP core, already supported by the stmmac
driver.

This glue layer implements some platform-specific settings needed by
the Amlogic variant.

Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
---
 drivers/net/ethernet/stmicro/stmmac/Kconfig        | 10 ++++
 drivers/net/ethernet/stmicro/stmmac/Makefile       |  1 +
 drivers/net/ethernet/stmicro/stmmac/dwmac-meson.c  | 67 ++++++++++++++++++++++
 drivers/net/ethernet/stmicro/stmmac/stmmac.h       |  3 +
 .../net/ethernet/stmicro/stmmac/stmmac_platform.c  |  3 +
 5 files changed, 84 insertions(+)
 create mode 100644 drivers/net/ethernet/stmicro/stmmac/dwmac-meson.c

diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig
index 2d09c11..b02d4a3 100644
--- a/drivers/net/ethernet/stmicro/stmmac/Kconfig
+++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig
@@ -26,6 +26,16 @@ config STMMAC_PLATFORM
 
 	  If unsure, say N.
 
+config DWMAC_MESON
+	bool "Amlogic Meson dwmac support"
+	depends on STMMAC_PLATFORM && ARCH_MESON
+	help
+	  Support for Ethernet controller on Amlogic Meson SoCs.
+
+	  This selects the Amlogic Meson SoC glue layer support for
+	  the stmmac device driver. This driver is used for Meson6 and
+	  Meson8 SoCs.
+
 config DWMAC_SOCFPGA
 	bool "SOCFPGA dwmac support"
 	depends on STMMAC_PLATFORM && MFD_SYSCON && (ARCH_SOCFPGA || COMPILE_TEST)
diff --git a/drivers/net/ethernet/stmicro/stmmac/Makefile b/drivers/net/ethernet/stmicro/stmmac/Makefile
index 18695eb..0533d0b 100644
--- a/drivers/net/ethernet/stmicro/stmmac/Makefile
+++ b/drivers/net/ethernet/stmicro/stmmac/Makefile
@@ -1,6 +1,7 @@
 obj-$(CONFIG_STMMAC_ETH) += stmmac.o
 stmmac-$(CONFIG_STMMAC_PLATFORM) += stmmac_platform.o
 stmmac-$(CONFIG_STMMAC_PCI) += stmmac_pci.o
+stmmac-$(CONFIG_DWMAC_MESON) += dwmac-meson.o
 stmmac-$(CONFIG_DWMAC_SUNXI) += dwmac-sunxi.o
 stmmac-$(CONFIG_DWMAC_STI) += dwmac-sti.o
 stmmac-$(CONFIG_DWMAC_SOCFPGA) += dwmac-socfpga.o
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-meson.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-meson.c
new file mode 100644
index 0000000..d225a60
--- /dev/null
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-meson.c
@@ -0,0 +1,67 @@
+/*
+ * Amlogic Meson DWMAC glue layer
+ *
+ * Copyright (C) 2014 Beniamino Galvani <b.galvani@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/device.h>
+#include <linux/ethtool.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+#include <linux/stmmac.h>
+
+#define ETHMAC_SPEED_100	BIT(1)
+
+struct meson_dwmac {
+	struct device	*dev;
+	void __iomem	*reg;
+};
+
+static void meson6_dwmac_fix_mac_speed(void *priv, unsigned int speed)
+{
+	struct meson_dwmac *dwmac = priv;
+	unsigned int val;
+
+	val = readl(dwmac->reg);
+
+	switch (speed) {
+	case SPEED_10:
+		val &= ~ETHMAC_SPEED_100;
+		break;
+	case SPEED_100:
+		val |= ETHMAC_SPEED_100;
+		break;
+	}
+
+	writel(val, dwmac->reg);
+}
+
+static void *meson6_dwmac_setup(struct platform_device *pdev)
+{
+	struct meson_dwmac *dwmac;
+	struct resource *res;
+
+	dwmac = devm_kzalloc(&pdev->dev, sizeof(*dwmac), GFP_KERNEL);
+	if (!dwmac)
+		return ERR_PTR(-ENOMEM);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	dwmac->reg = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(dwmac->reg))
+		return dwmac->reg;
+
+	return dwmac;
+}
+
+const struct stmmac_of_data meson6_dwmac_data = {
+	.setup		= meson6_dwmac_setup,
+	.fix_mac_speed	= meson6_dwmac_fix_mac_speed,
+};
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac.h b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
index 58097c0..4452889 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
@@ -137,6 +137,9 @@ void stmmac_disable_eee_mode(struct stmmac_priv *priv);
 bool stmmac_eee_init(struct stmmac_priv *priv);
 
 #ifdef CONFIG_STMMAC_PLATFORM
+#ifdef CONFIG_DWMAC_MESON
+extern const struct stmmac_of_data meson6_dwmac_data;
+#endif
 #ifdef CONFIG_DWMAC_SUNXI
 extern const struct stmmac_of_data sun7i_gmac_data;
 #endif
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
index bb524a9..6521717 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
@@ -30,6 +30,9 @@
 #include "stmmac.h"
 
 static const struct of_device_id stmmac_dt_ids[] = {
+#ifdef CONFIG_DWMAC_MESON
+	{ .compatible = "amlogic,meson6-dwmac", .data = &meson6_dwmac_data},
+#endif
 #ifdef CONFIG_DWMAC_SUNXI
 	{ .compatible = "allwinner,sun7i-a20-gmac", .data = &sun7i_gmac_data},
 #endif
-- 
1.9.1

  reply	other threads:[~2014-09-20 13:29 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-09-20 13:29 net: stmmac glue layer for Amlogic Meson SoCs Beniamino Galvani
2014-09-20 13:29 ` Beniamino Galvani [this message]
2014-09-20 13:29 ` [PATCH 2/2] net: stmmac: meson: document device tree bindings Beniamino Galvani
     [not found] ` <1411219757-9201-1-git-send-email-b.galvani-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2014-09-23  6:16   ` net: stmmac glue layer for Amlogic Meson SoCs Giuseppe CAVALLARO
2014-09-23 11:15     ` Beniamino Galvani
2014-09-26  4:13 ` David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1411219757-9201-2-git-send-email-b.galvani@gmail.com \
    --to=b.galvani@gmail.com \
    --cc=carlo@caione.org \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=galak@codeaurora.org \
    --cc=ijc+devicetree@hellion.org.uk \
    --cc=jerry.cao@amlogic.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=netdev@vger.kernel.org \
    --cc=pawel.moll@arm.com \
    --cc=peppe.cavallaro@st.com \
    --cc=robh+dt@kernel.org \
    --cc=victor.wan@amlogic.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).