From: Geert Uytterhoeven <geert+renesas@glider.be>
To: "Rafael J. Wysocki" <rjw@rjwysocki.net>,
Simon Horman <horms@verge.net.au>,
Magnus Damm <magnus.damm@gmail.com>
Cc: Ulf Hansson <ulf.hansson@linaro.org>,
Tomasz Figa <tomasz.figa@gmail.com>,
Philipp Zabel <philipp.zabel@gmail.com>,
Grygorii Strashko <grygorii.strashko@ti.com>,
Kevin Hilman <khilman@linaro.org>,
linux-sh@vger.kernel.org, linux-pm@vger.kernel.org,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
Geert Uytterhoeven <geert+renesas@glider.be>
Subject: [PATCH v3 13/13] ARM: shmobile: r8a7740 dtsi: Add preliminary PM QoS device latencies
Date: Thu, 25 Sep 2014 18:28:40 +0200 [thread overview]
Message-ID: <1411662520-22795-14-git-send-email-geert+renesas@glider.be> (raw)
In-Reply-To: <1411662520-22795-1-git-send-email-geert+renesas@glider.be>
For now use 250 µs, just like the legacy platform code does.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
v3:
- No changes
v2:
- New
arch/arm/boot/dts/r8a7740.dtsi | 136 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 136 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi
index ed0adeb61a1ad8ec..713170442b7bd4b2 100644
--- a/arch/arm/boot/dts/r8a7740.dtsi
+++ b/arch/arm/boot/dts/r8a7740.dtsi
@@ -26,6 +26,10 @@
reg = <0x0>;
clock-frequency = <800000000>;
power-domains = <&pd_a3sm>;
+ stop-latency = <250000>;
+ start-latency = <250000>;
+ save-state-latency = <250000>;
+ restore-state-latency = <250000>;
};
};
@@ -49,6 +53,10 @@
clocks = <&mstp3_clks R8A7740_CLK_CMT1>;
clock-names = "fck";
power-domains = <&pd_c5>;
+ stop-latency = <250000>;
+ start-latency = <250000>;
+ save-state-latency = <250000>;
+ restore-state-latency = <250000>;
renesas,channels-mask = <0x3f>;
@@ -75,6 +83,10 @@
0 149 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7740_CLK_INTCA>;
power-domains = <&pd_a4s>;
+ stop-latency = <250000>;
+ start-latency = <250000>;
+ save-state-latency = <250000>;
+ restore-state-latency = <250000>;
};
/* irqpin1: IRQ8 - IRQ15 */
@@ -97,6 +109,10 @@
0 149 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7740_CLK_INTCA>;
power-domains = <&pd_a4s>;
+ stop-latency = <250000>;
+ start-latency = <250000>;
+ save-state-latency = <250000>;
+ restore-state-latency = <250000>;
};
/* irqpin2: IRQ16 - IRQ23 */
@@ -119,6 +135,10 @@
0 149 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7740_CLK_INTCA>;
power-domains = <&pd_a4s>;
+ stop-latency = <250000>;
+ start-latency = <250000>;
+ save-state-latency = <250000>;
+ restore-state-latency = <250000>;
};
/* irqpin3: IRQ24 - IRQ31 */
@@ -141,6 +161,10 @@
0 149 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7740_CLK_INTCA>;
power-domains = <&pd_a4s>;
+ stop-latency = <250000>;
+ start-latency = <250000>;
+ save-state-latency = <250000>;
+ restore-state-latency = <250000>;
};
ether: ethernet@e9a00000 {
@@ -150,6 +174,10 @@
interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7740_CLK_GETHER>;
power-domains = <&pd_a4s>;
+ stop-latency = <250000>;
+ start-latency = <250000>;
+ save-state-latency = <250000>;
+ restore-state-latency = <250000>;
phy-mode = "mii";
#address-cells = <1>;
#size-cells = <0>;
@@ -167,6 +195,10 @@
0 204 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7740_CLK_IIC0>;
power-domains = <&pd_a4r>;
+ stop-latency = <250000>;
+ start-latency = <250000>;
+ save-state-latency = <250000>;
+ restore-state-latency = <250000>;
status = "disabled";
};
@@ -181,6 +213,10 @@
0 73 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7740_CLK_IIC1>;
power-domains = <&pd_a3sp>;
+ stop-latency = <250000>;
+ start-latency = <250000>;
+ save-state-latency = <250000>;
+ restore-state-latency = <250000>;
status = "disabled";
};
@@ -191,6 +227,10 @@
clocks = <&mstp2_clks R8A7740_CLK_SCIFA0>;
clock-names = "sci_ick";
power-domains = <&pd_a3sp>;
+ stop-latency = <250000>;
+ start-latency = <250000>;
+ save-state-latency = <250000>;
+ restore-state-latency = <250000>;
status = "disabled";
};
@@ -201,6 +241,10 @@
clocks = <&mstp2_clks R8A7740_CLK_SCIFA1>;
clock-names = "sci_ick";
power-domains = <&pd_a3sp>;
+ stop-latency = <250000>;
+ start-latency = <250000>;
+ save-state-latency = <250000>;
+ restore-state-latency = <250000>;
status = "disabled";
};
@@ -211,6 +255,10 @@
clocks = <&mstp2_clks R8A7740_CLK_SCIFA0>;
clock-names = "sci_ick";
power-domains = <&pd_a3sp>;
+ stop-latency = <250000>;
+ start-latency = <250000>;
+ save-state-latency = <250000>;
+ restore-state-latency = <250000>;
status = "disabled";
};
@@ -221,6 +269,10 @@
clocks = <&mstp2_clks R8A7740_CLK_SCIFA3>;
clock-names = "sci_ick";
power-domains = <&pd_a3sp>;
+ stop-latency = <250000>;
+ start-latency = <250000>;
+ save-state-latency = <250000>;
+ restore-state-latency = <250000>;
status = "disabled";
};
@@ -231,6 +283,10 @@
clocks = <&mstp2_clks R8A7740_CLK_SCIFA4>;
clock-names = "sci_ick";
power-domains = <&pd_a3sp>;
+ stop-latency = <250000>;
+ start-latency = <250000>;
+ save-state-latency = <250000>;
+ restore-state-latency = <250000>;
status = "disabled";
};
@@ -241,6 +297,10 @@
clocks = <&mstp2_clks R8A7740_CLK_SCIFA5>;
clock-names = "sci_ick";
power-domains = <&pd_a3sp>;
+ stop-latency = <250000>;
+ start-latency = <250000>;
+ save-state-latency = <250000>;
+ restore-state-latency = <250000>;
status = "disabled";
};
@@ -251,6 +311,10 @@
clocks = <&mstp2_clks R8A7740_CLK_SCIFA6>;
clock-names = "sci_ick";
power-domains = <&pd_a3sp>;
+ stop-latency = <250000>;
+ start-latency = <250000>;
+ save-state-latency = <250000>;
+ restore-state-latency = <250000>;
status = "disabled";
};
@@ -261,6 +325,10 @@
clocks = <&mstp2_clks R8A7740_CLK_SCIFA7>;
clock-names = "sci_ick";
power-domains = <&pd_a3sp>;
+ stop-latency = <250000>;
+ start-latency = <250000>;
+ save-state-latency = <250000>;
+ restore-state-latency = <250000>;
status = "disabled";
};
@@ -271,6 +339,10 @@
clocks = <&mstp2_clks R8A7740_CLK_SCIFB>;
clock-names = "sci_ick";
power-domains = <&pd_a3sp>;
+ stop-latency = <250000>;
+ start-latency = <250000>;
+ save-state-latency = <250000>;
+ restore-state-latency = <250000>;
status = "disabled";
};
@@ -290,6 +362,10 @@
<&irqpin3 0 0>, <&irqpin3 1 0>, <&irqpin3 2 0>, <&irqpin3 3 0>,
<&irqpin3 4 0>, <&irqpin3 5 0>, <&irqpin3 6 0>, <&irqpin3 7 0>;
power-domains = <&pd_c5>;
+ stop-latency = <250000>;
+ start-latency = <250000>;
+ save-state-latency = <250000>;
+ restore-state-latency = <250000>;
};
tpu: pwm@e6600000 {
@@ -297,6 +373,10 @@
reg = <0xe6600000 0x100>;
clocks = <&mstp3_clks R8A7740_CLK_TPU0>;
power-domains = <&pd_a3sp>;
+ stop-latency = <250000>;
+ start-latency = <250000>;
+ save-state-latency = <250000>;
+ restore-state-latency = <250000>;
status = "disabled";
#pwm-cells = <3>;
};
@@ -308,6 +388,10 @@
0 57 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7740_CLK_MMC>;
power-domains = <&pd_a3sp>;
+ stop-latency = <250000>;
+ start-latency = <250000>;
+ save-state-latency = <250000>;
+ restore-state-latency = <250000>;
status = "disabled";
};
@@ -319,6 +403,10 @@
0 119 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7740_CLK_SDHI0>;
power-domains = <&pd_a3sp>;
+ stop-latency = <250000>;
+ start-latency = <250000>;
+ save-state-latency = <250000>;
+ restore-state-latency = <250000>;
cap-sd-highspeed;
cap-sdio-irq;
status = "disabled";
@@ -332,6 +420,10 @@
0 123 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7740_CLK_SDHI1>;
power-domains = <&pd_a3sp>;
+ stop-latency = <250000>;
+ start-latency = <250000>;
+ save-state-latency = <250000>;
+ restore-state-latency = <250000>;
cap-sd-highspeed;
cap-sdio-irq;
status = "disabled";
@@ -345,6 +437,10 @@
0 127 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp4_clks R8A7740_CLK_SDHI2>;
power-domains = <&pd_a3sp>;
+ stop-latency = <250000>;
+ start-latency = <250000>;
+ save-state-latency = <250000>;
+ restore-state-latency = <250000>;
cap-sd-highspeed;
cap-sdio-irq;
status = "disabled";
@@ -357,6 +453,10 @@
interrupts = <0 9 0x4>;
clocks = <&mstp3_clks R8A7740_CLK_FSI>;
power-domains = <&pd_a4mp>;
+ stop-latency = <250000>;
+ start-latency = <250000>;
+ save-state-latency = <250000>;
+ restore-state-latency = <250000>;
status = "disabled";
};
@@ -409,6 +509,10 @@
reg = <0xe6150000 0x10000>;
clocks = <&extal1_clk>, <&extalr_clk>;
power-domains = <&pd_c5>;
+ stop-latency = <250000>;
+ start-latency = <250000>;
+ save-state-latency = <250000>;
+ restore-state-latency = <250000>;
#clock-cells = <1>;
clock-output-names = "system", "pllc0", "pllc1",
"pllc2", "r",
@@ -424,6 +528,10 @@
reg = <0xe6150080 4>;
clocks = <&pllc1_div2_clk>;
power-domains = <&pd_c5>;
+ stop-latency = <250000>;
+ start-latency = <250000>;
+ save-state-latency = <250000>;
+ restore-state-latency = <250000>;
#clock-cells = <0>;
clock-output-names = "sub";
};
@@ -433,6 +541,10 @@
compatible = "fixed-factor-clock";
clocks = <&cpg_clocks R8A7740_CLK_PLLC1>;
power-domains = <&pd_c5>;
+ stop-latency = <250000>;
+ start-latency = <250000>;
+ save-state-latency = <250000>;
+ restore-state-latency = <250000>;
#clock-cells = <0>;
clock-div = <2>;
clock-mult = <1>;
@@ -442,6 +554,10 @@
compatible = "fixed-factor-clock";
clocks = <&extal1_clk>;
power-domains = <&pd_c5>;
+ stop-latency = <250000>;
+ start-latency = <250000>;
+ save-state-latency = <250000>;
+ restore-state-latency = <250000>;
#clock-cells = <0>;
clock-div = <2>;
clock-mult = <1>;
@@ -454,6 +570,10 @@
reg = <0xe6150080 4>;
clocks = <&sub_clk>, <&sub_clk>;
power-domains = <&pd_c5>;
+ stop-latency = <250000>;
+ start-latency = <250000>;
+ save-state-latency = <250000>;
+ restore-state-latency = <250000>;
#clock-cells = <1>;
renesas,clock-indices = <
R8A7740_CLK_SUBCK R8A7740_CLK_SUBCK2
@@ -470,6 +590,10 @@
<&sub_clk>, <&sub_clk>,
<&cpg_clocks R8A7740_CLK_B>;
power-domains = <&pd_c5>;
+ stop-latency = <250000>;
+ start-latency = <250000>;
+ save-state-latency = <250000>;
+ restore-state-latency = <250000>;
#clock-cells = <1>;
renesas,clock-indices = <
R8A7740_CLK_CEU21 R8A7740_CLK_CEU20 R8A7740_CLK_TMU0
@@ -492,6 +616,10 @@
<&sub_clk>, <&sub_clk>, <&sub_clk>,
<&sub_clk>;
power-domains = <&pd_c5>;
+ stop-latency = <250000>;
+ start-latency = <250000>;
+ save-state-latency = <250000>;
+ restore-state-latency = <250000>;
#clock-cells = <1>;
renesas,clock-indices = <
R8A7740_CLK_SCIFA6 R8A7740_CLK_INTCA
@@ -522,6 +650,10 @@
<&cpg_clocks R8A7740_CLK_HP>,
<&cpg_clocks R8A7740_CLK_HP>;
power-domains = <&pd_c5>;
+ stop-latency = <250000>;
+ start-latency = <250000>;
+ save-state-latency = <250000>;
+ restore-state-latency = <250000>;
#clock-cells = <1>;
renesas,clock-indices = <
R8A7740_CLK_CMT1 R8A7740_CLK_FSI R8A7740_CLK_IIC1
@@ -540,6 +672,10 @@
<&cpg_clocks R8A7740_CLK_HP>,
<&cpg_clocks R8A7740_CLK_HP>;
power-domains = <&pd_c5>;
+ stop-latency = <250000>;
+ start-latency = <250000>;
+ save-state-latency = <250000>;
+ restore-state-latency = <250000>;
#clock-cells = <1>;
renesas,clock-indices = <
R8A7740_CLK_USBH R8A7740_CLK_SDHI2
--
1.9.1
next prev parent reply other threads:[~2014-09-25 16:28 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-25 16:28 [PATCH 00/13] ARM: shmobile: R-Mobile: DT PM domain support Geert Uytterhoeven
[not found] ` <1411662520-22795-1-git-send-email-geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org>
2014-09-25 16:28 ` [PATCH v3 01/13] PM / Domains: Add genpd attach/detach callbacks Geert Uytterhoeven
2014-09-26 15:47 ` Kevin Hilman
2014-09-25 16:28 ` [PATCH v3 02/13] PM / Domains: Add DT bindings for power-on/off latencies Geert Uytterhoeven
2014-09-26 8:19 ` Ulf Hansson
2014-09-26 15:28 ` Stephen Boyd
2014-09-26 17:52 ` Geert Uytterhoeven
2014-09-25 16:28 ` [PATCH v3 03/13] PM / Domains: Add DT bindings for PM QoS device latencies Geert Uytterhoeven
2014-09-26 8:28 ` Ulf Hansson
2014-09-25 16:28 ` [PATCH v3 04/13] PM / Domains: Add DT bindings for the R-Mobile System Controller Geert Uytterhoeven
2014-09-26 8:32 ` Ulf Hansson
2014-09-25 16:28 ` [PATCH v3 05/13] PM / Domains: Add helper variable np = dev->of_node Geert Uytterhoeven
2014-09-26 8:43 ` Ulf Hansson
2014-09-26 8:47 ` Geert Uytterhoeven
2014-09-25 16:28 ` [PATCH v3 06/13] PM / Domains: Retrieve PM QoS device latencies from DT Geert Uytterhoeven
2014-09-25 16:28 ` [PATCH v3 07/13] ARM: shmobile: R-Mobile: Use generic_pm_domain.attach_dev() for pm_clk setup Geert Uytterhoeven
2014-09-26 8:45 ` Ulf Hansson
[not found] ` <1411662520-22795-8-git-send-email-geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org>
2014-09-26 18:04 ` Geert Uytterhoeven
2014-10-03 16:01 ` Geert Uytterhoeven
2014-09-25 16:28 ` [PATCH v3 08/13] ARM: shmobile: R-Mobile: Store SYSC base address in rmobile_pm_domain Geert Uytterhoeven
2014-09-26 8:47 ` Ulf Hansson
2014-09-25 16:28 ` [PATCH v3 09/13] ARM: shmobile: R-Mobile: Add DT support for PM domains Geert Uytterhoeven
2014-09-25 16:28 ` [PATCH v3 10/13] ARM: shmobile: r8a7740 dtsi: Add PM domain support Geert Uytterhoeven
2014-09-26 8:13 ` Geert Uytterhoeven
2014-09-25 16:28 ` [PATCH v3 11/13] drivers: sh: Disable PM runtime for multi-platform r8a7740 with genpd Geert Uytterhoeven
2014-09-25 16:28 ` [PATCH v3 12/13] ARM: shmobile: r8a7740 dtsi: Add preliminary PM domain latencies Geert Uytterhoeven
2014-09-25 16:28 ` Geert Uytterhoeven [this message]
2014-09-26 8:16 ` [PATCH v3 13/13] ARM: shmobile: r8a7740 dtsi: Add preliminary PM QoS device latencies Geert Uytterhoeven
2014-09-25 20:19 ` [PATCH 00/13] ARM: shmobile: R-Mobile: DT PM domain support Rafael J. Wysocki
[not found] ` <3136347.ncZoJtR6MK-sKB8Sp2ER+y1GS7QM15AGw@public.gmane.org>
2014-09-26 9:27 ` Geert Uytterhoeven
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1411662520-22795-14-git-send-email-geert+renesas@glider.be \
--to=geert+renesas@glider.be \
--cc=devicetree@vger.kernel.org \
--cc=grygorii.strashko@ti.com \
--cc=horms@verge.net.au \
--cc=khilman@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-sh@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=philipp.zabel@gmail.com \
--cc=rjw@rjwysocki.net \
--cc=tomasz.figa@gmail.com \
--cc=ulf.hansson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).