From: Romain Perier <romain.perier@gmail.com>
To: devicetree@vger.kernel.org
Cc: broonie@kernel.org, lgirdwood@gmail.com,
linux-kernel@vger.kernel.org, heiko@sntech.de
Subject: [RFC][PATCH 2/4] regulator: act8865: Add support to turn off all outputs
Date: Tue, 30 Sep 2014 17:29:44 +0000 [thread overview]
Message-ID: <1412098186-5042-2-git-send-email-romain.perier@gmail.com> (raw)
In-Reply-To: <1412098186-5042-1-git-send-email-romain.perier@gmail.com>
When the property "poweroff-source" is found in the
devicetree, the function pm_power_off is defined. This function sends the
rights bit fields to the global off control register. shutdown/poweroff
commands are now supported for hardware components which use these PMU.
Signed-off-by: Romain Perier <romain.perier@gmail.com>
---
drivers/regulator/act8865-regulator.c | 28 ++++++++++++++++++++++++++++
1 file changed, 28 insertions(+)
diff --git a/drivers/regulator/act8865-regulator.c b/drivers/regulator/act8865-regulator.c
index afd06f9..c574123 100644
--- a/drivers/regulator/act8865-regulator.c
+++ b/drivers/regulator/act8865-regulator.c
@@ -61,6 +61,8 @@
#define ACT8846_REG12_VSET 0xa0
#define ACT8846_REG12_CTRL 0xa1
#define ACT8846_REG13_CTRL 0xb1
+#define ACT8846_GLB_OFF_CTRL 0xc3
+#define ACT8846_OFF_SYSMASK 0x18
/*
* ACT8865 Global Register Map.
@@ -84,6 +86,7 @@
#define ACT8865_LDO3_CTRL 0x61
#define ACT8865_LDO4_VSET 0x64
#define ACT8865_LDO4_CTRL 0x65
+#define ACT8865_MSTROFF 0x20
/*
* Field Definitions.
@@ -98,6 +101,8 @@
struct act8865 {
struct regmap *regmap;
+ int off_reg;
+ int off_mask;
};
static const struct regmap_config act8865_regmap_config = {
@@ -275,6 +280,16 @@ static struct regulator_init_data
return NULL;
}
+static struct i2c_client *act8865_i2c_client;
+static void act8865_power_off(void)
+{
+ struct act8865 *act8865;
+
+ act8865 = i2c_get_clientdata(act8865_i2c_client);
+ regmap_write(act8865->regmap, act8865->off_reg, act8865->off_mask);
+ while (1);
+}
+
static int act8865_pmic_probe(struct i2c_client *client,
const struct i2c_device_id *i2c_id)
{
@@ -285,6 +300,7 @@ static int act8865_pmic_probe(struct i2c_client *client,
int i, ret, num_regulators;
struct act8865 *act8865;
unsigned long type;
+ int off_reg, off_mask;
pdata = dev_get_platdata(dev);
@@ -304,10 +320,14 @@ static int act8865_pmic_probe(struct i2c_client *client,
case ACT8846:
regulators = act8846_regulators;
num_regulators = ARRAY_SIZE(act8846_regulators);
+ off_reg = ACT8846_GLB_OFF_CTRL;
+ off_mask = ACT8846_OFF_SYSMASK;
break;
case ACT8865:
regulators = act8865_regulators;
num_regulators = ARRAY_SIZE(act8865_regulators);
+ off_reg = ACT8865_SYS_CTRL;
+ off_mask = ACT8865_MSTROFF;
break;
default:
dev_err(dev, "invalid device id %lu\n", type);
@@ -345,6 +365,14 @@ static int act8865_pmic_probe(struct i2c_client *client,
return ret;
}
+ if (dev->of_node && of_get_regulator_poweroff_source(dev->of_node) &&
+ !pm_power_off) {
+ act8865_i2c_client = client;
+ act8865->off_reg = off_reg;
+ act8865->off_mask = off_mask;
+ pm_power_off = act8865_power_off;
+ }
+
/* Finally register devices */
for (i = 0; i < num_regulators; i++) {
const struct regulator_desc *desc = ®ulators[i];
--
1.9.1
next prev parent reply other threads:[~2014-09-30 17:29 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-30 17:29 [RFC][PATCH 1/4] regulator: Add helper function to get "poweroff-source" property Romain Perier
2014-09-30 17:29 ` Romain Perier [this message]
[not found] ` <1412098186-5042-1-git-send-email-romain.perier-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2014-09-30 17:29 ` [RFC][PATCH 3/4] ARM: dts: rockchip: Enable power off in pmic for Radxa Rock Romain Perier
2014-09-30 17:29 ` [RFC][PATCH 4/4] dt-bindings: Document the property poweroff-source for act8865 regulator Romain Perier
2014-10-01 18:07 ` [RFC][PATCH 1/4] regulator: Add helper function to get "poweroff-source" property Mark Brown
[not found] ` <20141001180759.GH4273-GFdadSzt00ze9xe1eoZjHA@public.gmane.org>
2014-10-02 17:43 ` Romain Perier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1412098186-5042-2-git-send-email-romain.perier@gmail.com \
--to=romain.perier@gmail.com \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=heiko@sntech.de \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).