[PATCH v2 07/47] qnap-poweroff: Drop reference to pm_power_off from devicetree bindings

[Guenter Roeck <linux@roeck-us.net>]

Replace reference to pm_power_off (which is an implementation detail)
and replace it with a more generic description of the driver's functionality.

Cc: Rob Herring <robh+dt@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
---
v2: Drop implementation details

 Documentation/devicetree/bindings/power_supply/qnap-poweroff.txt | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/power_supply/qnap-poweroff.txt b/Documentation/devicetree/bindings/power_supply/qnap-poweroff.txt
index af25e77..c363d71 100644
--- a/Documentation/devicetree/bindings/power_supply/qnap-poweroff.txt
+++ b/Documentation/devicetree/bindings/power_supply/qnap-poweroff.txt
@@ -3,8 +3,7 @@
 QNAP NAS devices have a microcontroller controlling the main power
 supply. This microcontroller is connected to UART1 of the Kirkwood and
 Orion5x SoCs. Sending the character 'A', at 19200 baud, tells the
-microcontroller to turn the power off. This driver adds a handler to
-pm_power_off which is called to turn the power off.
+microcontroller to turn the power off.
 
 Synology NAS devices use a similar scheme, but a different baud rate,
 9600, and a different character, '1'.
-- 
1.9.1