devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Kevin Cernekee <cernekee-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: ralf-6z/3iImG2C8G8FEW9MqTrA@public.gmane.org
Cc: f.fainelli-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
	mbizon-MmRyKUhfbQ9GWvitb5QawA@public.gmane.org,
	jogo-p3rKhJxN3npAfugRpC6u6w@public.gmane.org,
	jfraser-dY08KVG/lbpWk0Htik3J/w@public.gmane.org,
	linux-mips-6z/3iImG2C8G8FEW9MqTrA@public.gmane.org,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: [PATCH/RFC 05/17] MIPS: BMIPS: Mask off timer IRQs when hot-unplugging a CPU
Date: Mon, 20 Oct 2014 21:27:55 -0700	[thread overview]
Message-ID: <1413865687-15255-6-git-send-email-cernekee@gmail.com> (raw)
In-Reply-To: <1413865687-15255-1-git-send-email-cernekee-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>

From: Jon Fraser <jfraser-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>

CPU interrupts need to be disabled on a cpu being taken down.
When a cpu is hot-plugged out of the system the following sequence occurs.

On the CPU where the hotplug sequence was initiated:
    cpu_down
        _cpu_down {
            __cpu_notify(CPU_DOWN_PREPARE
            __stop_machine(take_cpu_down
                wait for cpu to run disable code.
            __cpu_die
        }

On the CPU  being disabled:
    take_cpu_down
        __cpu_disable {
            mp_ops->cpu_disable
                bmips_cpu_disable
                    clear_c0_status(IE_IRQ5) (added)
            cpu_notify(CPU_DYING...
        }

Before the cpu_notifier is called with CPU_DYING, all interrupts on the
dying cpu must be disabled.  This guarantees that before tick_notify is
called with the CPU_DYING event and sets the clock device pointer to
NULL, there can not be any more clock interrupts.

When this wasn't done, an unfortunately-timed timer interrupt sometimes
caused hangs immediately prior to system suspend:

    Debug PM is not enabled. To enable partial suspend, rebuild kernel with CONFIG_PM_DEBUG
    Pass 1 out of 1,PM: Syncing filesystems ... mode=none, tp1=done.
    1, flags=5, cycle_tp=, sleep=
    Freezing user space processes ... (elapsed 0.01 seconds) done.
    Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
    PM: suspend of devices complete after 54.199 msecs
    PM: late suspend of devices complete after 0.172 msecs
    Disabling non-boot CPUs ...
    SMP: CPU1 is offline
    INFO: rcu_sched detected stalls on CPUs/tasks: { 3} (detected by 0, t=62537 jiffies)
    Call Trace:
    [<804baa78>] dump_stack+0x8/0x34
    [<8008a2d8>] __rcu_pending+0x4b8/0x55c
    [<8008adf4>] rcu_check_callbacks+0x78/0x180
    [<80037830>] update_process_times+0x40/0x6c
    [<80072fe4>] tick_sched_timer+0x74/0xe4
    [<80050180>] __run_hrtimer.clone.30+0x64/0x140
    [<80051150>] hrtimer_interrupt+0x19c/0x4bc
    [<8000cdb8>] c0_compare_interrupt+0x50/0x88
    [<80081b18>] handle_irq_event_percpu+0x5c/0x2f4
    [<80086490>] handle_percpu_irq+0x8c/0xc0
    [<800811b4>] generic_handle_irq+0x34/0x54
    [<800067dc>] do_IRQ+0x18/0x2c
    [<8000375c>] plat_irq_dispatch+0xd0/0x128
    [<80004a04>] ret_from_irq+0x0/0x4
    [<80004c40>] r4k_wait+0x20/0x40
    [<80006b6c>] cpu_idle+0x98/0xf0
    [<805d3988>] start_kernel+0x424/0x440

Signed-off-by: Jon Fraser <jfraser-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
Signed-off-by: Kevin Cernekee <cernekee-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
 arch/mips/kernel/smp-bmips.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/mips/kernel/smp-bmips.c b/arch/mips/kernel/smp-bmips.c
index 887c3ea..f7b1bee 100644
--- a/arch/mips/kernel/smp-bmips.c
+++ b/arch/mips/kernel/smp-bmips.c
@@ -375,6 +375,7 @@ static int bmips_cpu_disable(void)
 
 	set_cpu_online(cpu, false);
 	cpu_clear(cpu, cpu_callin_map);
+	clear_c0_status(IE_IRQ5);
 
 	local_flush_tlb_all();
 	local_flush_icache_range(0, ~0);
-- 
2.1.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

  parent reply	other threads:[~2014-10-21  4:27 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-10-21  4:27 [PATCH/RFC 00/17] MIPS: BMIPS updates and BCM3384 platform support Kevin Cernekee
     [not found] ` <1413865687-15255-1-git-send-email-cernekee-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2014-10-21  4:27   ` [PATCH/RFC 01/17] MIPS: BMIPS: Fix ".previous without corresponding .section" warnings Kevin Cernekee
2014-10-21  4:27   ` [PATCH/RFC 02/17] MIPS: BMIPS: Align secondary boot sequence with latest firmware releases Kevin Cernekee
2014-10-21  4:27   ` [PATCH/RFC 03/17] MIPS: BMIPS: Introduce helper function to change the reset vector Kevin Cernekee
2014-10-21  4:27   ` [PATCH/RFC 04/17] MIPS: BMIPS: Allow BMIPS3300 to utilize SMP ebase relocation code Kevin Cernekee
2014-10-21  4:27   ` Kevin Cernekee [this message]
2014-10-21  4:27   ` [PATCH/RFC 06/17] MIPS: BMIPS: Explicitly configure reset vectors prior to secondary boot Kevin Cernekee
2014-10-21  4:27   ` [PATCH/RFC 07/17] MIPS: Allow MIPS_CPU_SCACHE to be used with different line sizes Kevin Cernekee
2014-10-21  4:27   ` [PATCH/RFC 08/17] MIPS: BMIPS: Select the appropriate L1_CACHE_SHIFT for 438x and 5000 CPUs Kevin Cernekee
2014-10-21  4:27   ` [PATCH/RFC 09/17] MIPS: BMIPS: Let each platform customize the CPU1 IRQ mask Kevin Cernekee
2014-10-21  4:28   ` [PATCH/RFC 10/17] MIPS: BMIPS: Add special cache handling in c-r4k.c Kevin Cernekee
2014-10-21  4:28   ` [PATCH/RFC 11/17] MIPS: BMIPS: Add PRId for BMIPS5200 (Whirlwind) Kevin Cernekee
2014-10-21  4:28   ` [PATCH/RFC 12/17] MIPS: Create a helper function for DT setup Kevin Cernekee
2014-10-21  4:28   ` [PATCH/RFC 13/17] Documentation: DT: Add entries for BCM3384 and its peripherals Kevin Cernekee
2014-10-21  4:28   ` [PATCH/RFC 14/17] Documentation: DT: Add "mti" vendor prefix Kevin Cernekee
2014-10-21  4:28   ` [PATCH/RFC 15/17] MIPS: bcm3384: Initial commit of bcm3384 platform support Kevin Cernekee
2014-10-21  4:28   ` [PATCH/RFC 16/17] MAINTAINERS: Add entry for BCM33xx cable chips Kevin Cernekee
2014-10-21  4:28   ` [PATCH/RFC 17/17] MAINTAINERS: Add entry for bcm63xx/bcm33xx UDC gadget driver Kevin Cernekee
2014-10-21 19:31   ` [PATCH/RFC 00/17] MIPS: BMIPS updates and BCM3384 platform support Florian Fainelli

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1413865687-15255-6-git-send-email-cernekee@gmail.com \
    --to=cernekee-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=f.fainelli-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    --cc=jfraser-dY08KVG/lbpWk0Htik3J/w@public.gmane.org \
    --cc=jogo-p3rKhJxN3npAfugRpC6u6w@public.gmane.org \
    --cc=linux-mips-6z/3iImG2C8G8FEW9MqTrA@public.gmane.org \
    --cc=mbizon-MmRyKUhfbQ9GWvitb5QawA@public.gmane.org \
    --cc=ralf-6z/3iImG2C8G8FEW9MqTrA@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).