From mboxrd@z Thu Jan 1 00:00:00 1970 From: Kevin Cernekee Subject: [PATCH/RFC 06/17] MIPS: BMIPS: Explicitly configure reset vectors prior to secondary boot Date: Mon, 20 Oct 2014 21:27:56 -0700 Message-ID: <1413865687-15255-7-git-send-email-cernekee@gmail.com> References: <1413865687-15255-1-git-send-email-cernekee@gmail.com> Return-path: In-Reply-To: <1413865687-15255-1-git-send-email-cernekee-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: ralf-6z/3iImG2C8G8FEW9MqTrA@public.gmane.org Cc: f.fainelli-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org, mbizon-MmRyKUhfbQ9GWvitb5QawA@public.gmane.org, jogo-p3rKhJxN3npAfugRpC6u6w@public.gmane.org, jfraser-dY08KVG/lbpWk0Htik3J/w@public.gmane.org, linux-mips-6z/3iImG2C8G8FEW9MqTrA@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org List-Id: devicetree@vger.kernel.org The secondary CPU's reset vector needs to be set to KSEG1 for a cold boot (release from reset), or KSEG0 for a warm restart. On a cold boot KSEG0 may be unavailable (BMIPS4380), and on a warm restart KSEG1 may be unavailable (XKS01 mode on 4380 or 5000). Signed-off-by: Kevin Cernekee --- arch/mips/kernel/smp-bmips.c | 29 ++++++++--------------------- 1 file changed, 8 insertions(+), 21 deletions(-) diff --git a/arch/mips/kernel/smp-bmips.c b/arch/mips/kernel/smp-bmips.c index f7b1bee..162391d 100644 --- a/arch/mips/kernel/smp-bmips.c +++ b/arch/mips/kernel/smp-bmips.c @@ -47,6 +47,8 @@ cpumask_t bmips_booted_mask; #define RESET_FROM_KSEG0 0x80080800 #define RESET_FROM_KSEG1 0xa0080800 +static void bmips_set_reset_vec(int cpu, u32 val); + #ifdef CONFIG_SMP /* initial $sp, $gp - used by arch/mips/kernel/bmips_vec.S */ @@ -198,6 +200,9 @@ static void bmips_boot_secondary(int cpu, struct task_struct *idle) pr_info("SMP: Booting CPU%d...\n", cpu); if (cpumask_test_cpu(cpu, &bmips_booted_mask)) { + /* kseg1 might not exist if this CPU enabled XKS01 */ + bmips_set_reset_vec(cpu, RESET_FROM_KSEG0); + switch (current_cpu_type()) { case CPU_BMIPS4350: case CPU_BMIPS4380: @@ -207,8 +212,9 @@ static void bmips_boot_secondary(int cpu, struct task_struct *idle) bmips5000_send_ipi_single(cpu, 0); break; } - } - else { + } else { + bmips_set_reset_vec(cpu, RESET_FROM_KSEG1); + switch (current_cpu_type()) { case CPU_BMIPS4350: case CPU_BMIPS4380: @@ -229,31 +235,12 @@ static void bmips_boot_secondary(int cpu, struct task_struct *idle) */ static void bmips_init_secondary(void) { - /* move NMI vector to kseg0, in case XKS01 is enabled */ - - void __iomem *cbr; - unsigned long old_vec; - unsigned long relo_vector; - int boot_cpu; - switch (current_cpu_type()) { case CPU_BMIPS4350: case CPU_BMIPS4380: - cbr = BMIPS_GET_CBR(); - - boot_cpu = !!(read_c0_brcm_cmt_local() & (1 << 31)); - relo_vector = boot_cpu ? BMIPS_RELO_VECTOR_CONTROL_0 : - BMIPS_RELO_VECTOR_CONTROL_1; - - old_vec = __raw_readl(cbr + relo_vector); - __raw_writel(old_vec & ~0x20000000, cbr + relo_vector); - clear_c0_cause(smp_processor_id() ? C_SW1 : C_SW0); break; case CPU_BMIPS5000: - write_c0_brcm_bootvec(read_c0_brcm_bootvec() & - (smp_processor_id() & 0x01 ? ~0x20000000 : ~0x2000)); - write_c0_brcm_action(ACTION_CLR_IPI(smp_processor_id(), 0)); break; } -- 2.1.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html