From: Sebastian Reichel <sre@kernel.org>
To: Hans Verkuil <hans.verkuil@cisco.com>, linux-media@vger.kernel.org
Cc: Tony Lindgren <tony@atomide.com>,
Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>,
Mark Rutland <mark.rutland@arm.com>,
Ian Campbell <ijc+devicetree@hellion.org.uk>,
Kumar Gala <galak@codeaurora.org>,
linux-omap@vger.kernel.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org, Sebastian Reichel <sre@kernel.org>
Subject: [RFCv2 7/8] ARM: OMAP2: RX-51: update si4713 platform data
Date: Tue, 21 Oct 2014 17:07:06 +0200 [thread overview]
Message-ID: <1413904027-16767-8-git-send-email-sre@kernel.org> (raw)
In-Reply-To: <1413904027-16767-1-git-send-email-sre@kernel.org>
This updates platform data related to Si4713, which
has been updated to be compatible with DT interface.
Signed-off-by: Sebastian Reichel <sre@kernel.org>
---
arch/arm/mach-omap2/board-rx51-peripherals.c | 69 +++++++++++++---------------
1 file changed, 31 insertions(+), 38 deletions(-)
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index ddfc8df..ec2e410 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -23,6 +23,7 @@
#include <linux/regulator/machine.h>
#include <linux/gpio.h>
#include <linux/gpio_keys.h>
+#include <linux/gpio/machine.h>
#include <linux/mmc/host.h>
#include <linux/power/isp1704_charger.h>
#include <linux/platform_data/spi-omap2-mcspi.h>
@@ -38,7 +39,6 @@
#include <sound/tlv320aic3x.h>
#include <sound/tpa6130a2-plat.h>
-#include <media/radio-si4713.h>
#include <media/si4713.h>
#include <linux/platform_data/leds-lp55xx.h>
@@ -760,46 +760,17 @@ static struct regulator_init_data rx51_vintdig = {
},
};
-static const char * const si4713_supply_names[] = {
- "vio",
- "vdd",
-};
-
-static struct si4713_platform_data rx51_si4713_i2c_data __initdata_or_module = {
- .supplies = ARRAY_SIZE(si4713_supply_names),
- .supply_names = si4713_supply_names,
- .gpio_reset = RX51_FMTX_RESET_GPIO,
-};
-
-static struct i2c_board_info rx51_si4713_board_info __initdata_or_module = {
- I2C_BOARD_INFO("si4713", SI4713_I2C_ADDR_BUSEN_HIGH),
- .platform_data = &rx51_si4713_i2c_data,
-};
-
-static struct radio_si4713_platform_data rx51_si4713_data __initdata_or_module = {
- .i2c_bus = 2,
- .subdev_board_info = &rx51_si4713_board_info,
-};
-
-static struct platform_device rx51_si4713_dev __initdata_or_module = {
- .name = "radio-si4713",
- .id = -1,
- .dev = {
- .platform_data = &rx51_si4713_data,
+static struct gpiod_lookup_table rx51_fmtx_gpios_table = {
+ .dev_id = "2-0063",
+ .table = {
+ GPIO_LOOKUP("gpio.6", 3, "reset", GPIO_ACTIVE_HIGH), /* 163 */
+ { },
},
};
-static __init void rx51_init_si4713(void)
+static __init void rx51_gpio_init(void)
{
- int err;
-
- err = gpio_request_one(RX51_FMTX_IRQ, GPIOF_DIR_IN, "si4713 irq");
- if (err) {
- printk(KERN_ERR "Cannot request si4713 irq gpio. %d\n", err);
- return;
- }
- rx51_si4713_board_info.irq = gpio_to_irq(RX51_FMTX_IRQ);
- platform_device_register(&rx51_si4713_dev);
+ gpiod_add_lookup_table(&rx51_fmtx_gpios_table);
}
static int rx51_twlgpio_setup(struct device *dev, unsigned gpio, unsigned n)
@@ -1029,7 +1000,17 @@ static struct aic3x_pdata rx51_aic3x_data2 = {
.gpio_reset = 60,
};
+static struct si4713_platform_data rx51_si4713_platform_data = {
+ .is_platform_device = true
+};
+
static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_2[] = {
+#if IS_ENABLED(CONFIG_I2C_SI4713) && IS_ENABLED(CONFIG_PLATFORM_SI4713)
+ {
+ I2C_BOARD_INFO("si4713", 0x63),
+ .platform_data = &rx51_si4713_platform_data,
+ },
+#endif
{
I2C_BOARD_INFO("tlv320aic3x", 0x18),
.platform_data = &rx51_aic3x_data,
@@ -1070,6 +1051,10 @@ static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_3[] = {
static int __init rx51_i2c_init(void)
{
+#if IS_ENABLED(CONFIG_I2C_SI4713) && IS_ENABLED(CONFIG_PLATFORM_SI4713)
+ int err;
+#endif
+
if ((system_rev >= SYSTEM_REV_S_USES_VAUX3 && system_rev < 0x100) ||
system_rev >= SYSTEM_REV_B_USES_VAUX3) {
rx51_twldata.vaux3 = &rx51_vaux3_mmc;
@@ -1087,6 +1072,14 @@ static int __init rx51_i2c_init(void)
rx51_twldata.vdac->constraints.name = "VDAC";
omap_pmic_init(1, 2200, "twl5030", 7 + OMAP_INTC_START, &rx51_twldata);
+#if IS_ENABLED(CONFIG_I2C_SI4713) && IS_ENABLED(CONFIG_PLATFORM_SI4713)
+ err = gpio_request_one(RX51_FMTX_IRQ, GPIOF_DIR_IN, "si4713 irq");
+ if (err) {
+ printk(KERN_ERR "Cannot request si4713 irq gpio. %d\n", err);
+ return err;
+ }
+ rx51_peripherals_i2c_board_info_2[0].irq = gpio_to_irq(RX51_FMTX_IRQ);
+#endif
omap_register_i2c_bus(2, 100, rx51_peripherals_i2c_board_info_2,
ARRAY_SIZE(rx51_peripherals_i2c_board_info_2));
#if defined(CONFIG_SENSORS_LIS3_I2C) || defined(CONFIG_SENSORS_LIS3_I2C_MODULE)
@@ -1300,6 +1293,7 @@ static void __init rx51_init_omap3_rom_rng(void)
void __init rx51_peripherals_init(void)
{
+ rx51_gpio_init();
rx51_i2c_init();
regulator_has_full_constraints();
gpmc_onenand_init(board_onenand_data);
@@ -1307,7 +1301,6 @@ void __init rx51_peripherals_init(void)
rx51_add_gpio_keys();
rx51_init_wl1251();
rx51_init_tsc2005();
- rx51_init_si4713();
rx51_init_lirc();
spi_register_board_info(rx51_peripherals_spi_board_info,
ARRAY_SIZE(rx51_peripherals_spi_board_info));
--
2.1.1
next prev parent reply other threads:[~2014-10-21 15:07 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-21 15:06 [RFCv2 0/8] [media] si4713 DT binding Sebastian Reichel
2014-10-21 15:07 ` [RFCv2 1/8] [media] si4713: switch to devm regulator API Sebastian Reichel
[not found] ` <1413904027-16767-2-git-send-email-sre-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
2014-11-11 11:07 ` Mauro Carvalho Chehab
2014-11-11 14:33 ` Sebastian Reichel
2014-11-11 17:59 ` Hans Verkuil
[not found] ` <54624E83.1060404-qWit8jRvyhVmR6Xm/wNWPw@public.gmane.org>
2014-11-11 22:12 ` Mauro Carvalho Chehab
2014-10-21 15:07 ` [RFCv2 2/8] [media] si4713: switch reset gpio to devm_gpiod API Sebastian Reichel
2014-10-21 15:07 ` [RFCv2 3/8] [media] si4713: use managed memory allocation Sebastian Reichel
2014-10-21 15:07 ` [RFCv2 4/8] [media] si4713: use managed irq request Sebastian Reichel
2014-10-21 15:07 ` [RFCv2 5/8] [media] si4713: add device tree support Sebastian Reichel
[not found] ` <1413904027-16767-6-git-send-email-sre-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
2014-11-04 21:47 ` Sakari Ailus
2014-11-10 20:58 ` Sebastian Reichel
2014-10-21 15:07 ` [RFCv2 6/8] [media] si4713: add DT binding documentation Sebastian Reichel
2014-10-21 15:07 ` Sebastian Reichel [this message]
2014-10-21 15:07 ` [RFCv2 8/8] [media] si4713: cleanup platform data Sebastian Reichel
2014-11-07 12:49 ` [RFCv2 0/8] [media] si4713 DT binding Hans Verkuil
2014-11-10 11:06 ` Hans Verkuil
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1413904027-16767-8-git-send-email-sre@kernel.org \
--to=sre@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=galak@codeaurora.org \
--cc=hans.verkuil@cisco.com \
--cc=ijc+devicetree@hellion.org.uk \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).