From mboxrd@z Thu Jan 1 00:00:00 1970 From: Kevin Cernekee Subject: [PATCH V3 01/10] tty: serial: bcm63xx: Allow bcm63xx_uart to be built on other platforms Date: Tue, 21 Oct 2014 15:22:57 -0700 Message-ID: <1413930186-23168-2-git-send-email-cernekee@gmail.com> References: <1413930186-23168-1-git-send-email-cernekee@gmail.com> Return-path: In-Reply-To: <1413930186-23168-1-git-send-email-cernekee@gmail.com> Sender: linux-serial-owner@vger.kernel.org To: gregkh@linuxfoundation.org, jslaby@suse.cz Cc: robh@kernel.org, grant.likely@linaro.org, arnd@arndb.de, geert@linux-m68k.org, f.fainelli@gmail.com, mbizon@freebox.fr, jogo@openwrt.org, linux-mips@linux-mips.org, linux-serial@vger.kernel.org, devicetree@vger.kernel.org List-Id: devicetree@vger.kernel.org This device was originally supported on bcm63xx only, but it shows up on a wide variety of MIPS and ARM chipsets spanning multiple product lines. Now that the driver has eliminated dependencies on bcm63xx-specific header files, we can build it on any non-bcm63xx kernel. Compile-tested on x86, both statically and as a module. Tested for functionality on bcm3384 (a new MIPS platform under active development). Signed-off-by: Kevin Cernekee Acked-by: Florian Fainelli --- drivers/tty/serial/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 649b784..4a5c0c8 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -1283,7 +1283,7 @@ config SERIAL_TIMBERDALE config SERIAL_BCM63XX tristate "bcm63xx serial port support" select SERIAL_CORE - depends on BCM63XX + depends on MIPS || ARM || COMPILE_TEST help If you have a bcm63xx CPU, you can enable its onboard serial port by enabling this options. -- 2.1.1