devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Scott Branden <sbranden@broadcom.com>
To: Christian Daudt <bcm@fixthebug.org>,
	Matt Porter <mporter@linaro.org>,
	Russell King <linux@arm.linux.org.uk>,
	bcm-kernel-feedback-list@broadcom.com,
	Mike Turquette <mturquette@linaro.org>,
	Alex Elder <elder@linaro.org>, Rob Herring <robh+dt@kernel.org>,
	Pawel Moll <pawel.moll@arm.com>,
	Mark Rutland <mark.rutland@arm.com>,
	Ian Campbell <ijc+devicetree@hellion.org.uk>,
	Kumar Gala <galak@codeaurora.org>,
	Andrew Morton <akpm@linux-foundation.org>,
	"David S. Miller" <davem@davemloft.net>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Joe Perches <joe@perches.com>,
	Mauro Carvalho Chehab <m.chehab@samsung.com>,
	Antti Palosaari <crope@iki.fi>
Cc: JD Zheng <jdzheng@broadcom.com>, Ray Jui <rjui@broadcom.com>,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
	Jonathan Richardson <jonathar@broadcom.com>,
	Scott Branden <sbranden@broadcom.com>
Subject: [PATCH v6 3/6] ARM: cygnus defconfig : Initial defconfig for Broadcom Cygnus SoC
Date: Tue, 21 Oct 2014 19:09:49 -0700	[thread overview]
Message-ID: <1413943792-7379-4-git-send-email-sbranden@broadcom.com> (raw)
In-Reply-To: <1413943792-7379-1-git-send-email-sbranden@broadcom.com>

From: Jonathan Richardson <jonathar@broadcom.com>

This defconfig is utilized so a customer or developer can understand
what kernel drivers are utilized by the Cygnus SoC.  It also enables
debug configs which should be disabled if optimal performance is
desired.

Tested-by: Jonathan Richardson <jonathar@broadcom.com>
Reviewed-by: JD (Jiandong) Zheng <jdzheng@broadcom.com>
Signed-off-by: Scott Branden <sbranden@broadcom.com>
---
 arch/arm/configs/bcm_cygnus_defconfig |  237 +++++++++++++++++++++++++++++++++
 1 file changed, 237 insertions(+)
 create mode 100644 arch/arm/configs/bcm_cygnus_defconfig

diff --git a/arch/arm/configs/bcm_cygnus_defconfig b/arch/arm/configs/bcm_cygnus_defconfig
new file mode 100644
index 0000000..9ad77a8
--- /dev/null
+++ b/arch/arm/configs/bcm_cygnus_defconfig
@@ -0,0 +1,237 @@
+CONFIG_KERNEL_XZ=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_FHANDLE=y
+CONFIG_IRQ_DOMAIN_DEBUG=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=19
+CONFIG_CGROUPS=y
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_RESOURCE_COUNTERS=y
+CONFIG_CGROUP_SCHED=y
+CONFIG_BLK_CGROUP=y
+CONFIG_NAMESPACES=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_EMBEDDED=y
+CONFIG_PERF_EVENTS=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_JUMP_LABEL=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_ARCH_BCM=y
+CONFIG_ARCH_BCM_CYGNUS=y
+CONFIG_ARM_THUMBEE=y
+CONFIG_PCI=y
+CONFIG_PCI_DEBUG=y
+CONFIG_PREEMPT=y
+CONFIG_AEABI=y
+CONFIG_HIGHMEM=y
+# CONFIG_COMPACTION is not set
+# CONFIG_ATAGS is not set
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_CPU_IDLE=y
+CONFIG_VFP=y
+CONFIG_NEON=y
+# CONFIG_SUSPEND is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+CONFIG_TCP_CONG_ADVANCED=y
+# CONFIG_TCP_CONG_BIC is not set
+# CONFIG_TCP_CONG_WESTWOOD is not set
+# CONFIG_TCP_CONG_HTCP is not set
+CONFIG_IPV6=y
+# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET6_XFRM_MODE_BEET is not set
+# CONFIG_IPV6_SIT is not set
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_IPV6_SUBTREES=y
+CONFIG_IPV6_MROUTE=y
+CONFIG_NETFILTER=y
+# CONFIG_BRIDGE_NETFILTER is not set
+CONFIG_NF_CONNTRACK=y
+# CONFIG_NF_CONNTRACK_PROCFS is not set
+CONFIG_NF_CONNTRACK_FTP=y
+CONFIG_NF_CONNTRACK_IPV4=y
+CONFIG_IP_NF_IPTABLES=y
+CONFIG_IP_NF_FILTER=y
+CONFIG_IP_NF_TARGET_REJECT=y
+CONFIG_IP_NF_NAT=y
+CONFIG_IP_NF_TARGET_MASQUERADE=y
+CONFIG_IP_NF_TARGET_REDIRECT=y
+CONFIG_IP_NF_MANGLE=y
+CONFIG_IP_NF_RAW=y
+CONFIG_NF_CONNTRACK_IPV6=y
+CONFIG_IP6_NF_IPTABLES=y
+CONFIG_IP6_NF_MATCH_AH=y
+CONFIG_IP6_NF_MATCH_EUI64=y
+CONFIG_IP6_NF_MATCH_FRAG=y
+CONFIG_IP6_NF_MATCH_OPTS=y
+CONFIG_IP6_NF_MATCH_IPV6HEADER=y
+CONFIG_IP6_NF_MATCH_MH=y
+CONFIG_IP6_NF_MATCH_RT=y
+CONFIG_IP6_NF_FILTER=y
+CONFIG_IP6_NF_TARGET_REJECT=y
+CONFIG_IP6_NF_MANGLE=y
+CONFIG_IP6_NF_RAW=y
+CONFIG_BRIDGE=y
+# CONFIG_BRIDGE_IGMP_SNOOPING is not set
+CONFIG_VLAN_8021Q=y
+CONFIG_NET_SCHED=y
+CONFIG_NET_SCH_FQ_CODEL=y
+CONFIG_CFG80211=y
+# CONFIG_CFG80211_DEFAULT_PS is not set
+CONFIG_CFG80211_WEXT=y
+CONFIG_RFKILL=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_UBI=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_BLK_DEV_SR=y
+CONFIG_NETDEVICES=y
+# CONFIG_NET_CADENCE is not set
+# CONFIG_NET_VENDOR_CIRRUS is not set
+# CONFIG_NET_VENDOR_FARADAY is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
+# CONFIG_NET_VENDOR_WIZNET is not set
+CONFIG_PHYLIB=y
+CONFIG_BROADCOM_PHY=y
+# CONFIG_INPUT_MOUSEDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_SERIO is not set
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_SERIAL_8250=y
+# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+CONFIG_SERIAL_8250_DW=y
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C_CHARDEV=y
+# CONFIG_I2C_HELPER_AUTO is not set
+CONFIG_I2C_SMBUS=y
+CONFIG_SPI=y
+CONFIG_SPI_PL022=y
+CONFIG_SPI_SPIDEV=y
+CONFIG_GPIO_SYSFS=y
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_ARM_SP805_WATCHDOG=y
+CONFIG_MEDIA_SUPPORT=y
+CONFIG_MEDIA_CAMERA_SUPPORT=y
+CONFIG_MEDIA_USB_SUPPORT=y
+CONFIG_USB_VIDEO_CLASS=y
+# CONFIG_USB_GSPCA is not set
+CONFIG_FB=y
+CONFIG_FB_ARMCLCD=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+CONFIG_BACKLIGHT_PWM=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_DYNAMIC_MINORS=y
+CONFIG_SND_VERBOSE_PRINTK=y
+CONFIG_SND_DEBUG=y
+CONFIG_SND_USB_AUDIO=y
+CONFIG_SND_SOC=y
+CONFIG_USB=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_EHCI_HCD_PLATFORM=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PLATFORM=y
+CONFIG_USB_STORAGE=y
+CONFIG_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_SDHCI_OF_ARASAN=y
+CONFIG_RTC_CLASS=y
+CONFIG_PWM=y
+CONFIG_EXT4_FS=y
+CONFIG_AUTOFS4_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_NTFS_FS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_UBIFS_FS=y
+CONFIG_NFS_FS=y
+CONFIG_ROOT_NFS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_UTF8=y
+CONFIG_PRINTK_TIME=y
+CONFIG_DYNAMIC_DEBUG=y
+CONFIG_DEBUG_INFO=y
+CONFIG_STRIP_ASM_SYMS=y
+CONFIG_DEBUG_FS=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_OBJECTS=y
+CONFIG_DEBUG_OBJECTS_RCU_HEAD=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=110
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC=y
+# CONFIG_SCHED_DEBUG is not set
+CONFIG_SCHEDSTATS=y
+# CONFIG_DEBUG_PREEMPT is not set
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_DEBUG_ATOMIC_SLEEP=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_LL=y
+CONFIG_DEBUG_LL_UART_8250=y
+CONFIG_DEBUG_UART_PHYS=0x18023000
+CONFIG_DEBUG_UART_VIRT=0xf1023000
+CONFIG_EARLY_PRINTK=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
-- 
1.7.9.5

  parent reply	other threads:[~2014-10-22  2:09 UTC|newest]

Thread overview: 176+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <Scott Branden <sbranden@broadcom.com>
2014-10-22 20:57 ` [PATCH v7 0/7] Add initial support for Broadcom Cygnus SoC Scott Branden
2014-10-22 20:57   ` [PATCH v7 1/7] ARM: cygnus: Initial " Scott Branden
2014-10-22 20:57   ` [PATCH v7 2/7] dt-bindings: Document Broadcom Cygnus SoC and clocks Scott Branden
2014-10-22 20:57   ` [PATCH v7 3/7] ARM: cygnus defconfig : Initial defconfig for Broadcom Cygnus SoC Scott Branden
2014-10-22 20:57   ` [PATCH v7 4/7] ARM: dts: Enable " Scott Branden
2014-10-28 16:10     ` Arnd Bergmann
2014-10-28 19:41       ` Scott Branden
2014-10-22 20:57   ` [PATCH v7 5/7] MAINTAINERS: Entry for Cygnus/iproc arm architecture Scott Branden
2014-10-22 20:57   ` [PATCH v7 6/7] ARM: mach-bcm: Consolidate currently supported IPROC SoCs Scott Branden
2014-10-22 20:57   ` [PATCH v7 7/7] ARM: mach-bcm: ARCH_BCM_MOBILE: remove one level of menu from Kconfig Scott Branden
2014-10-28 19:53 ` [PATCH v8 0/8] Add initial support for Broadcom Cygnus SoC Scott Branden
2014-10-28 19:53   ` [PATCH v8 1/8] ARM: cygnus: Initial " Scott Branden
     [not found]   ` <1414525992-3678-1-git-send-email-sbranden-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
2014-10-28 19:53     ` [PATCH v8 2/8] dt-bindings: Document Broadcom Cygnus SoC and clocks Scott Branden
2014-10-28 19:53     ` [PATCH v8 3/8] ARM: cygnus defconfig : Initial defconfig for Broadcom Cygnus SoC Scott Branden
2014-10-28 19:53   ` [PATCH v8 4/8] ARM: dts: Enable " Scott Branden
     [not found]     ` <1414525992-3678-5-git-send-email-sbranden-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
2014-11-09  0:22       ` Olof Johansson
2014-11-09  6:13         ` Scott Branden
2014-11-09  6:49           ` Olof Johansson
     [not found]             ` <CAOesGMhd37UM+7+6eR9iLY22Fb9cG1dr8dD4DAzLJNRmtysnkg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-11-09 17:23               ` Greg Kroah-Hartman
     [not found]                 ` <20141109172311.GB738-U8xfFu+wG4EAvxtiuMwx3w@public.gmane.org>
2014-11-09 20:38                   ` Arnd Bergmann
2014-11-10  5:17                     ` Scott Branden
     [not found]                       ` <54604A71.1010000-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
2014-11-10  8:11                         ` Arnd Bergmann
2014-11-10 18:28                           ` Scott Branden
2014-10-28 19:53   ` [PATCH v8 5/8] MAINTAINERS: Entry for Cygnus/iproc arm architecture Scott Branden
2014-10-28 19:53   ` [PATCH v8 6/8] ARM: mach-bcm: Consolidate currently supported IPROC SoCs Scott Branden
2014-10-28 19:53   ` [PATCH v8 7/8] ARM: mach-bcm: ARCH_BCM_MOBILE: remove one level of menu from Kconfig Scott Branden
2014-10-28 19:53   ` [PATCH v8 8/8] ARM: multi_v7_defconfig: Enable Broadcom Cygnus Scott Branden
2014-10-28 20:01     ` Arnd Bergmann
2014-10-28 20:06       ` Scott Branden
2014-10-28 20:13         ` Arnd Bergmann
2015-02-10  0:06 ` [PATCH 0/4] Add support for IPROC SDHCI controller Scott Branden
2015-02-10  0:06   ` [PATCH 1/4] mmc: sdhci: add quirk for ACMD23 broken Scott Branden
2015-02-10  0:06   ` [PATCH 2/4] mmc: sdhci: do not set AUTO_CMD12 for multi-block CMD53 Scott Branden
2015-02-10  0:06   ` [PATCH 3/4] mmc: sdhci-iproc: add IPROC SDHCI driver Scott Branden
2015-02-10  0:06   ` [PATCH 4/4] mmc: sdhci-iproc: add device tree bindings Scott Branden
2015-03-02 23:50     ` Florian Fainelli
2015-03-04 23:14       ` Scott Branden
     [not found]   ` <1423526791-29453-1-git-send-email-sbranden-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
2015-02-26 17:28     ` [PATCH 0/4] Add support for IPROC SDHCI controller Scott Branden
2015-02-10  0:07 ` [PATCH 0/2] Add support for Broadcom RNG200 Scott Branden
     [not found]   ` <1423526830-29516-1-git-send-email-sbranden-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
2015-02-10  0:07     ` [PATCH 1/2] hwrng: iproc-rng200 - Add Broadcom IPROC RNG driver Scott Branden
     [not found]       ` <1423526830-29516-2-git-send-email-sbranden-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
2015-02-10  0:27         ` Joe Perches
2015-02-14 16:36           ` Scott Branden
2015-02-14 17:02             ` Scott Branden
2015-02-10  0:07     ` [PATCH 2/2] hwrng: iproc-rng200 - Add device tree bindings Scott Branden
2015-02-10  0:07 ` [PATCH 0/2] Add support for Broadcom keypad controller Scott Branden
2015-02-10  0:07   ` [PATCH 1/2] Input: bcm-keypad: add device tree bindings Scott Branden
     [not found]     ` <1423526861-29579-2-git-send-email-sbranden-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
2015-02-10  0:51       ` Dmitry Torokhov
2015-02-14 16:49         ` Scott Branden
     [not found]           ` <54DF7C8B.3050103-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
2015-02-16  5:17             ` Dmitry Torokhov
2015-02-23 17:49               ` Dmitry Torokhov
2015-02-26 16:13                 ` Scott Branden
2015-02-10  0:07   ` [PATCH 2/2] Input: bcm-keypad: Add Broadcom keypad controller Scott Branden
2015-02-10  1:02     ` Dmitry Torokhov
2015-02-14 17:12       ` Scott Branden
2015-02-25 18:16 ` [PATCH v2 0/2] Add support for Broadcom RNG200 Scott Branden
2015-02-25 18:16   ` [PATCH v2 1/2] hwrng: iproc-rng200 - Add device tree bindings Scott Branden
2015-03-02 23:47     ` Florian Fainelli
2015-02-25 18:16   ` [PATCH v2 2/2] hwrng: iproc-rng200 - Add Broadcom IPROC RNG driver Scott Branden
2015-02-25 18:43     ` Dmitry Torokhov
2015-03-03  0:50       ` Scott Branden
     [not found]     ` <1424888184-22180-3-git-send-email-sbranden-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
2015-02-25 19:17       ` Arnd Bergmann
2015-02-26 19:37         ` Scott Branden
2015-02-26 20:15           ` Arnd Bergmann
2015-02-26 22:26             ` Scott Branden
     [not found]               ` <54EF9D7A.3090707-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
2015-02-27  9:14                 ` Arnd Bergmann
2015-02-28 16:01                   ` Scott Branden
2015-02-28 19:31                     ` Arnd Bergmann
2015-03-02 19:41                       ` Scott Branden
     [not found]   ` <1424888184-22180-1-git-send-email-sbranden-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
2015-03-02 10:23     ` [PATCH v2 0/2] Add support for Broadcom RNG200 Herbert Xu
     [not found] ` <Scott Branden <sbranden-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
2014-10-08  5:26   ` [PATCH V3 0/6] Add initial support for Broadcom Cygnus SoC Scott Branden
2014-10-08  5:27     ` [PATCH 1/6] ARM: cygnus: Initial " Scott Branden
     [not found]       ` <1412746025-11998-2-git-send-email-sbranden-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
2014-10-08  7:54         ` Arnd Bergmann
2014-10-08 12:27           ` Scott Branden
2014-10-08 13:28             ` Arnd Bergmann
2014-10-08 16:27               ` Scott Branden
     [not found]                 ` <543565DC.8010704-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
2014-10-08 18:12                   ` Arnd Bergmann
2014-10-08 18:45                     ` Scott Branden
2014-10-08 22:16                     ` Scott Branden
2014-10-09  7:32                       ` Arnd Bergmann
2014-10-08 13:10         ` Rob Herring
     [not found]           ` <CAL_JsqKD6F5xcUQx8T++uDK2zaqTneRwU+2yR7RMj==ArwcLcA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-10-08 16:34             ` Scott Branden
2014-10-08  8:11       ` Russell King - ARM Linux
     [not found]         ` <20141008081112.GB5182-l+eeeJia6m9vn6HldHNs0ANdhmdF6hFW@public.gmane.org>
2014-10-08 11:17           ` Scott Branden
2014-10-08 11:41             ` Russell King - ARM Linux
2014-10-08  5:27     ` [PATCH 2/6] clk: Clock driver " Scott Branden
2014-10-08  5:27     ` [PATCH 3/6] dt-bindings: Document Broadcom Cygnus SoC and clock driver Scott Branden
     [not found]       ` <1412746025-11998-4-git-send-email-sbranden-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
2014-10-08  7:57         ` Arnd Bergmann
2014-10-08 10:58           ` Scott Branden
     [not found]             ` <543518C7.9070809-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
2014-10-08 13:35               ` Arnd Bergmann
2014-10-08  5:27     ` [PATCH 4/6] ARM: cygnus defconfig : Initial defconfig for Broadcom Cygnus SoC Scott Branden
     [not found]       ` <1412746025-11998-5-git-send-email-sbranden-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
2014-10-08  7:58         ` Arnd Bergmann
2014-10-08 11:01           ` Scott Branden
     [not found]     ` <1412746025-11998-1-git-send-email-sbranden-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
2014-10-08  5:27       ` [PATCH 5/6] ARM: dts: Enable " Scott Branden
2014-10-08  5:27       ` [PATCH 6/6] MAINTAINERS: Entry for Cygnus/iproc arm architecture and clock drivers Scott Branden
2014-10-09 22:44   ` [PATCH V4 0/7] Add initial support for Broadcom Cygnus SoC Scott Branden
2014-10-09 22:44     ` [PATCH V4 1/7] ARM: cygnus: Initial " Scott Branden
     [not found]       ` <1412894671-5921-2-git-send-email-sbranden-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
2014-10-10  9:50         ` Arnd Bergmann
2014-10-10 19:08           ` Scott Branden
2014-10-09 22:44     ` [PATCH V4 3/7] dt-bindings: Document Broadcom Cygnus SoC and clock driver Scott Branden
     [not found]     ` <1412894671-5921-1-git-send-email-sbranden-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
2014-10-09 22:44       ` [PATCH V4 2/7] clk: Clock driver support for Broadcom Cygnus SoC Scott Branden
2014-10-09 22:44       ` [PATCH V4 4/7] ARM: cygnus defconfig : Initial defconfig " Scott Branden
2014-10-09 22:44     ` [PATCH V4 5/7] ARM: dts: Enable " Scott Branden
2014-10-10 10:08       ` Arnd Bergmann
2014-10-10 19:11         ` Scott Branden
2014-10-09 22:44     ` [PATCH V4 6/7] MAINTAINERS: Entry for Cygnus/iproc arm architecture and clock drivers Scott Branden
2014-10-09 23:00       ` Joe Perches
2014-10-09 23:18         ` Scott Branden
2014-10-09 22:44     ` [PATCH V4 7/7] ARM: multi_v7_defconfig: Enable ARCH_BCM_CYGNUS config Scott Branden
     [not found]       ` <1412894671-5921-8-git-send-email-sbranden-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
2014-10-10  9:59         ` Arnd Bergmann
2014-10-10 19:12           ` Scott Branden
2014-10-15  2:58   ` [PATCH v5 0/6] Add initial support for Broadcom Cygnus SoC Scott Branden
2014-10-15  2:58     ` [PATCH v5 1/6] ARM: cygnus: Initial " Scott Branden
     [not found]       ` <1413341936-17606-2-git-send-email-sbranden-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
2014-10-20 19:55         ` Arnd Bergmann
2014-10-20 22:59           ` Scott Branden
     [not found]             ` <544593E1.90608-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
2014-10-21  5:48               ` Arnd Bergmann
2014-10-22  0:11                 ` Scott Branden
2014-10-22  8:22                   ` Arnd Bergmann
2014-10-22 17:12                     ` Scott Branden
2014-10-15  2:58     ` [PATCH v5 2/6] dt-bindings: Document Broadcom Cygnus SoC and clocks Scott Branden
2014-10-15  2:58     ` [PATCH v5 3/6] ARM: cygnus defconfig : Initial defconfig for Broadcom Cygnus SoC Scott Branden
2014-10-15  2:58     ` [PATCH v5 4/6] ARM: dts: Enable " Scott Branden
2014-10-15  2:58     ` [PATCH v5 5/6] MAINTAINERS: Entry for Cygnus/iproc arm architecture Scott Branden
2014-10-15  2:58     ` [PATCH v5 6/6] ARM: mach-bcm: Consolidate currently supported IPROC SoCs Scott Branden
2014-10-22  2:09   ` [PATCH v6 0/6] Add initial support for Broadcom Cygnus SoC Scott Branden
2014-10-22  2:09     ` [PATCH v6 1/6] ARM: cygnus: Initial " Scott Branden
2014-10-22  2:09     ` [PATCH v6 2/6] dt-bindings: Document Broadcom Cygnus SoC and clocks Scott Branden
2014-10-22  2:09     ` Scott Branden [this message]
2014-10-22  2:09     ` [PATCH v6 4/6] ARM: dts: Enable Broadcom Cygnus SoC Scott Branden
2014-10-22  2:09     ` [PATCH v6 5/6] MAINTAINERS: Entry for Cygnus/iproc arm architecture Scott Branden
2014-10-22  2:09     ` [PATCH v6 6/6] ARM: mach-bcm: Consolidate currently supported IPROC SoCs Scott Branden
2014-10-28 23:15   ` [PATCH v9 0/8] Add initial support for Broadcom Cygnus SoC Scott Branden
2014-10-28 23:15     ` [PATCH v9 1/8] ARM: cygnus: Initial " Scott Branden
2014-10-28 23:15     ` [PATCH v9 2/8] dt-bindings: Document Broadcom Cygnus SoC and clocks Scott Branden
     [not found]       ` <1414538111-11668-3-git-send-email-sbranden-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
2014-11-20  1:05         ` Mike Turquette
2014-10-28 23:15     ` [PATCH v9 3/8] ARM: cygnus defconfig : Initial defconfig for Broadcom Cygnus SoC Scott Branden
2014-10-28 23:15     ` [PATCH v9 4/8] ARM: dts: Enable " Scott Branden
2014-11-10 10:50       ` Paul Bolle
2014-11-10 18:35         ` Olof Johansson
     [not found]           ` <CAOesGMgqsvOtgxKa6aBwvTqW3CO5Q7E_YsVVuS83yR4GdQEHUw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-11-10 19:23             ` Paul Bolle
2014-10-28 23:15     ` [PATCH v9 5/8] MAINTAINERS: Entry for Cygnus/iproc arm architecture Scott Branden
2014-10-28 23:15     ` [PATCH v9 6/8] ARM: mach-bcm: Consolidate currently supported IPROC SoCs Scott Branden
     [not found]     ` <1414538111-11668-1-git-send-email-sbranden-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
2014-10-28 23:15       ` [PATCH v9 7/8] ARM: mach-bcm: ARCH_BCM_MOBILE: remove one level of menu from Kconfig Scott Branden
2014-10-28 23:15     ` [PATCH v9 8/8] ARM: multi_v7_defconfig: Enable Broadcom Cygnus Scott Branden
2015-02-26 16:08   ` [PATCH v2 0/2] Add support for Broadcom keypad controller Scott Branden
2015-02-26 16:08     ` [PATCH v2 1/2] Input: bcm-keypad: add device tree bindings Scott Branden
     [not found]       ` <1424966930-28097-2-git-send-email-sbranden-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
2015-02-27 23:39         ` Dmitry Torokhov
2015-02-28 15:41           ` Scott Branden
     [not found]     ` <1424966930-28097-1-git-send-email-sbranden-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
2015-02-26 16:08       ` [PATCH v2 2/2] Input: bcm-keypad: Add Broadcom keypad controller Scott Branden
     [not found]         ` <1424966930-28097-3-git-send-email-sbranden-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
2015-02-27 23:44           ` Dmitry Torokhov
2015-02-28 15:52             ` Scott Branden
2015-02-28 14:16         ` Paul Bolle
2015-02-28 15:36           ` Scott Branden
2015-02-28 16:03   ` [PATCH v3 0/2] Add support for " Scott Branden
2015-02-28 16:03     ` [PATCH v3 1/2] Input: bcm-keypad: add device tree bindings Scott Branden
2015-02-28 16:03     ` [PATCH v3 2/2] Input: bcm-keypad: Add Broadcom keypad controller Scott Branden
2015-02-28 16:35 ` [PATCH v4 0/2] Add support for " Scott Branden
2015-02-28 16:35   ` [PATCH v4 1/2] Input: bcm-keypad: add device tree bindings Scott Branden
     [not found]     ` <1425141357-7807-2-git-send-email-sbranden-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
2015-03-03  0:04       ` Dmitry Torokhov
     [not found]   ` <1425141357-7807-1-git-send-email-sbranden-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
2015-02-28 16:35     ` [PATCH v4 2/2] Input: bcm-keypad: Add Broadcom keypad controller Scott Branden
     [not found]       ` <1425141357-7807-3-git-send-email-sbranden-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
2015-02-28 22:10         ` Dmitry Torokhov
2015-02-28 22:15           ` Dmitry Torokhov
2015-03-02 19:37             ` Scott Branden
2015-03-02 20:23               ` Dmitry Torokhov
2015-03-02 21:59                 ` Scott Branden
2015-03-02 19:38             ` Scott Branden
2015-03-04 20:42 ` [PATCH v3 0/2] Add support for Broadcom RNG200 Scott Branden
2015-03-04 20:42   ` [PATCH v3 1/2] hwrng: iproc-rng200 - Add device tree bindings Scott Branden
2015-03-04 20:42   ` [PATCH v3 2/2] hwrng: iproc-rng200 - Add Broadcom IPROC RNG driver Scott Branden
2015-03-06 11:53   ` [PATCH v3 0/2] Add support for Broadcom RNG200 Herbert Xu
2015-03-05 15:59 ` [PATCH RESEND 0/4] Add support for IPROC SDHCI controller Scott Branden
2015-03-05 15:59   ` [PATCH 1/4] mmc: sdhci: add quirk for ACMD23 broken Scott Branden
2015-03-05 15:59   ` [PATCH 2/4] mmc: sdhci: do not set AUTO_CMD12 for multi-block CMD53 Scott Branden
2015-03-05 15:59   ` [PATCH 3/4] mmc: sdhci-iproc: add IPROC SDHCI driver Scott Branden
2015-03-05 15:59   ` [PATCH 4/4] mmc: sdhci-iproc: add device tree bindings Scott Branden
2015-03-05 16:16   ` [PATCH RESEND 0/4] Add support for IPROC SDHCI controller Ulf Hansson
2015-03-05 19:57     ` Florian Fainelli

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1413943792-7379-4-git-send-email-sbranden@broadcom.com \
    --to=sbranden@broadcom.com \
    --cc=akpm@linux-foundation.org \
    --cc=bcm-kernel-feedback-list@broadcom.com \
    --cc=bcm@fixthebug.org \
    --cc=crope@iki.fi \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=elder@linaro.org \
    --cc=galak@codeaurora.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=ijc+devicetree@hellion.org.uk \
    --cc=jdzheng@broadcom.com \
    --cc=joe@perches.com \
    --cc=jonathar@broadcom.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@arm.linux.org.uk \
    --cc=m.chehab@samsung.com \
    --cc=mark.rutland@arm.com \
    --cc=mporter@linaro.org \
    --cc=mturquette@linaro.org \
    --cc=pawel.moll@arm.com \
    --cc=rjui@broadcom.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).