devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Zhou Wang <wangzhou.bry@gmail.com>
To: David Woodhouse <dwmw2@infradead.org>,
	Brian Norris <computersforpeace@gmail.com>,
	linux-mtd@lists.infradead.org
Cc: mark.rutland@arm.com, pawel.moll@arm.com,
	ijc+devicetree@hellion.org.uk, robh+dt@kernel.org,
	galak@codeaurora.org, caizhiyong@huawei.com,
	haojian.zhuang@gmail.com, xuwei5@hisilicon.com,
	wangzhou1@hisilicon.com, linux-kernel@vger.kernel.org,
	devicetree@vger.kernel.org, Zhou Wang <wangzhou.bry@gmail.com>
Subject: [PATCH v2 0/2] mtd: hisilicon: add a new driver for NAND controller of hisilicon hip04 Soc
Date: Thu, 23 Oct 2014 22:04:43 +0800	[thread overview]
Message-ID: <1414073085-19296-1-git-send-email-wangzhou.bry@gmail.com> (raw)

This patchset adds the support for NAND controller of hisilicon hip04 Soc.
The NAND controller IP was developed by hisilicon and needs a new driver to
support it. This patchset is based on v3.18-rc1. I have tested that NAND flash
controller works fine in Hip04 D01 board.

Changes in v2:
- Remove the patch for device tree, now patchset only has the driver and its
  device tree binding documentation.
- Change the file name: hisi_nand.c to hisi504_nand.c.
Changes in v1:
- Remove callback functions out of struct hinfc_host, and call them directly
  in relative functions.
- Change hinfc_read and hinfc_write from macros to inline functions.
- Instead of putting pointers, embed struct nand_chip and struct mtd_info in
  struct hinfc_host directly.
- rewrite some unclear lines in device tree binding document, correct some
  code style error.

Link on v1:
- https://lkml.org/lkml/2014/7/15/198

Zhou Wang (2):
  mtd: hisilicon: add a new NAND controller driver for hisilicon hip04 Soc
  mtd: hisilicon: add device tree binding documentation

 .../devicetree/bindings/mtd/hisi504-nand.txt       |   40 +
 drivers/mtd/nand/Kconfig                           |    5 +
 drivers/mtd/nand/Makefile                          |    1 +
 drivers/mtd/nand/hisi504_nand.c                    |  836 ++++++++++++++++++++
 4 files changed, 882 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mtd/hisi504-nand.txt
 create mode 100644 drivers/mtd/nand/hisi504_nand.c

-- 
1.7.9.5

             reply	other threads:[~2014-10-23 14:04 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-10-23 14:04 Zhou Wang [this message]
2014-10-23 14:04 ` [PATCH v2 1/2] mtd: hisilicon: add a new NAND controller driver for hisilicon hip04 Soc Zhou Wang
     [not found]   ` <1414073085-19296-2-git-send-email-wangzhou.bry-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2014-10-24 11:46     ` Haojian Zhuang
     [not found]       ` <CAN1soZz8NYxppaY4cXadqynERZ=6ZRAynDtptGAps+yUJZ0Qsw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-10-25  3:30         ` Zhou Wang
2014-10-23 14:04 ` [PATCH v2 2/2] mtd: hisilicon: add device tree binding documentation Zhou Wang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1414073085-19296-1-git-send-email-wangzhou.bry@gmail.com \
    --to=wangzhou.bry@gmail.com \
    --cc=caizhiyong@huawei.com \
    --cc=computersforpeace@gmail.com \
    --cc=devicetree@vger.kernel.org \
    --cc=dwmw2@infradead.org \
    --cc=galak@codeaurora.org \
    --cc=haojian.zhuang@gmail.com \
    --cc=ijc+devicetree@hellion.org.uk \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=mark.rutland@arm.com \
    --cc=pawel.moll@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=wangzhou1@hisilicon.com \
    --cc=xuwei5@hisilicon.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).