From: Geert Uytterhoeven <geert+renesas@glider.be>
To: Mike Turquette <mturquette@linaro.org>,
Simon Horman <horms@verge.net.au>,
Magnus Damm <magnus.damm@gmail.com>
Cc: Ben Dooks <ben.dooks@codethink.co.uk>,
devicetree@vger.kernel.org, linux-sh@vger.kernel.org,
Geert Uytterhoeven <geert+renesas@glider.be>
Subject: [PATCH 5/6] ARM: shmobile: r8a7791 dtsi: Change to using clock-indices
Date: Wed, 29 Oct 2014 15:19:12 +0100 [thread overview]
Message-ID: <1414592353-24044-6-git-send-email-geert+renesas@glider.be> (raw)
In-Reply-To: <1414592353-24044-1-git-send-email-geert+renesas@glider.be>
From: Ben Dooks <ben.dooks@codethink.co.uk>
With the addition of clock-indices in commit 8e33f91a0b84ae19 ("clk:
shmobile: clk-mstp: change to using clock-indices"), we can change the
DTSes to use the generic property instead of the deprecated
vendor-specific property.
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
[geert: Extracted r8a7791-specific part, rebased, reworded]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
arch/arm/boot/dts/r8a7791.dtsi | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 73e4c8eb5d8ca338..41a636167c0e6a8c 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -999,7 +999,7 @@
reg = <0 0xe6150130 0 4>, <0 0xe6150030 0 4>;
clocks = <&mp_clk>;
#clock-cells = <1>;
- renesas,clock-indices = <R8A7791_CLK_MSIOF0>;
+ clock-indices = <R8A7791_CLK_MSIOF0>;
clock-output-names = "msiof0";
};
mstp1_clks: mstp1_clks@e6150134 {
@@ -1010,7 +1010,7 @@
<&p_clk>, <&rclk_clk>, <&cp_clk>, <&zs_clk>, <&zs_clk>,
<&zs_clk>;
#clock-cells = <1>;
- renesas,clock-indices = <
+ clock-indices = <
R8A7791_CLK_VCP0 R8A7791_CLK_VPC0 R8A7791_CLK_JPU
R8A7791_CLK_SSP1 R8A7791_CLK_TMU1 R8A7791_CLK_3DG
R8A7791_CLK_2DDMAC R8A7791_CLK_FDP1_1 R8A7791_CLK_FDP1_0
@@ -1030,7 +1030,7 @@
<&mp_clk>, <&mp_clk>, <&mp_clk>,
<&zs_clk>, <&zs_clk>;
#clock-cells = <1>;
- renesas,clock-indices = <
+ clock-indices = <
R8A7791_CLK_SCIFA2 R8A7791_CLK_SCIFA1 R8A7791_CLK_SCIFA0
R8A7791_CLK_MSIOF2 R8A7791_CLK_SCIFB0 R8A7791_CLK_SCIFB1
R8A7791_CLK_MSIOF1 R8A7791_CLK_SCIFB2
@@ -1047,7 +1047,7 @@
clocks = <&cp_clk>, <&sd2_clk>, <&sd1_clk>, <&cpg_clocks R8A7791_CLK_SD0>,
<&mmc0_clk>, <&hp_clk>, <&mp_clk>, <&hp_clk>, <&mp_clk>, <&rclk_clk>;
#clock-cells = <1>;
- renesas,clock-indices = <
+ clock-indices = <
R8A7791_CLK_TPU0 R8A7791_CLK_SDHI2 R8A7791_CLK_SDHI1 R8A7791_CLK_SDHI0
R8A7791_CLK_MMCIF0 R8A7791_CLK_IIC0 R8A7791_CLK_PCIEC R8A7791_CLK_IIC1
R8A7791_CLK_SSUSB R8A7791_CLK_CMT1
@@ -1061,7 +1061,7 @@
reg = <0 0xe6150144 0 4>, <0 0xe615003c 0 4>;
clocks = <&extal_clk>, <&p_clk>;
#clock-cells = <1>;
- renesas,clock-indices = <R8A7791_CLK_THERMAL R8A7791_CLK_PWM>;
+ clock-indices = <R8A7791_CLK_THERMAL R8A7791_CLK_PWM>;
clock-output-names = "thermal", "pwm";
};
mstp7_clks: mstp7_clks@e615014c {
@@ -1071,7 +1071,7 @@
<&zs_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>,
<&zx_clk>, <&zx_clk>, <&zx_clk>;
#clock-cells = <1>;
- renesas,clock-indices = <
+ clock-indices = <
R8A7791_CLK_EHCI R8A7791_CLK_HSUSB R8A7791_CLK_HSCIF2 R8A7791_CLK_SCIF5
R8A7791_CLK_SCIF4 R8A7791_CLK_HSCIF1 R8A7791_CLK_HSCIF0
R8A7791_CLK_SCIF3 R8A7791_CLK_SCIF2 R8A7791_CLK_SCIF1
@@ -1088,7 +1088,7 @@
clocks = <&zg_clk>, <&zg_clk>, <&zg_clk>, <&p_clk>, <&zs_clk>,
<&zs_clk>;
#clock-cells = <1>;
- renesas,clock-indices = <
+ clock-indices = <
R8A7791_CLK_VIN2 R8A7791_CLK_VIN1 R8A7791_CLK_VIN0
R8A7791_CLK_ETHER R8A7791_CLK_SATA1 R8A7791_CLK_SATA0
>;
@@ -1104,7 +1104,7 @@
<&cp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>,
<&hp_clk>, <&hp_clk>;
#clock-cells = <1>;
- renesas,clock-indices = <
+ clock-indices = <
R8A7791_CLK_GPIO7 R8A7791_CLK_GPIO6 R8A7791_CLK_GPIO5 R8A7791_CLK_GPIO4
R8A7791_CLK_GPIO3 R8A7791_CLK_GPIO2 R8A7791_CLK_GPIO1 R8A7791_CLK_GPIO0
R8A7791_CLK_RCAN1 R8A7791_CLK_RCAN0 R8A7791_CLK_QSPI_MOD R8A7791_CLK_I2C5
@@ -1154,7 +1154,7 @@
reg = <0 0xe615099c 0 4>, <0 0xe61509ac 0 4>;
clocks = <&mp_clk>, <&mp_clk>, <&mp_clk>;
#clock-cells = <1>;
- renesas,clock-indices = <
+ clock-indices = <
R8A7791_CLK_SCIFA3 R8A7791_CLK_SCIFA4 R8A7791_CLK_SCIFA5
>;
clock-output-names = "scifa3", "scifa4", "scifa5";
--
1.9.1
next prev parent reply other threads:[~2014-10-29 14:19 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-29 14:19 [PATCH 0/6] ARM: shmobile: Change to using clock-indices Geert Uytterhoeven
2014-10-29 14:19 ` [PATCH 1/6] clk: shmobile: Deprecate renesas,clock-indices Geert Uytterhoeven
2014-10-30 1:06 ` Simon Horman
2014-10-30 1:46 ` Simon Horman
2014-10-30 10:22 ` Laurent Pinchart
2014-10-29 14:19 ` [PATCH 2/6] ARM: shmobile: r8a7740 dtsi: Change to using clock-indices Geert Uytterhoeven
2014-10-29 14:19 ` [PATCH 3/6] ARM: shmobile: r8a7779 " Geert Uytterhoeven
2014-10-29 14:19 ` Geert Uytterhoeven [this message]
[not found] ` <1414592353-24044-1-git-send-email-geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org>
2014-10-29 14:19 ` [PATCH 4/6] ARM: shmobile: r8a7790 " Geert Uytterhoeven
2014-10-29 14:19 ` [PATCH 6/6] ARM: shmobile: r8a7794 " Geert Uytterhoeven
2014-10-30 0:10 ` [PATCH 0/6] ARM: shmobile: " Kuninori Morimoto
2014-10-30 20:40 ` Ben Dooks
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1414592353-24044-6-git-send-email-geert+renesas@glider.be \
--to=geert+renesas@glider.be \
--cc=ben.dooks@codethink.co.uk \
--cc=devicetree@vger.kernel.org \
--cc=horms@verge.net.au \
--cc=linux-sh@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=mturquette@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).