devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: <tthayer@opensource.altera.com>
To: bp@alien8.de, dougthompson@xmission.com, m.chehab@samsung.com,
	robh+dt@kernel.org, pawel.moll@arm.com, mark.rutland@arm.com,
	ijc+devicetree@hellion.org.uk, galak@codeaurora.org,
	linux@arm.linux.org.uk, dinguyen@opensource.altera.com,
	grant.likely@linaro.org
Cc: devicetree@vger.kernel.org, linux-doc@vger.kernel.org,
	linux-edac@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, tthayer.linux@gmail.com,
	tthayer@opensource.altera.com
Subject: [PATCHv3 2/5] arm: socfpga: Enable OCRAM ECC on startup.
Date: Thu, 30 Oct 2014 10:32:08 -0500	[thread overview]
Message-ID: <1414683131-20786-3-git-send-email-tthayer@opensource.altera.com> (raw)
In-Reply-To: <1414683131-20786-1-git-send-email-tthayer@opensource.altera.com>

From: Thor Thayer <tthayer@opensource.altera.com>

This patch enables the ECC for On-Chip RAM on machine
startup.  The ECC has to be enabled before data is
is stored in memory otherwise the ECC will fail on
reads.

Signed-off-by: Thor Thayer <tthayer@opensource.altera.com>
---
v2: Split OCRAM ECC portion separately. Addition of iounmap()
and reorganization of gen_pool_free. Remove defconfig from patch.

v3: No change
---
 MAINTAINERS                     |    1 +
 arch/arm/mach-socfpga/Makefile  |    1 +
 arch/arm/mach-socfpga/ocram.c   |   90 +++++++++++++++++++++++++++++++++++++++
 arch/arm/mach-socfpga/ocram.h   |   28 ++++++++++++
 arch/arm/mach-socfpga/socfpga.c |    8 ++++
 5 files changed, 128 insertions(+)
 create mode 100644 arch/arm/mach-socfpga/ocram.c
 create mode 100644 arch/arm/mach-socfpga/ocram.h

diff --git a/MAINTAINERS b/MAINTAINERS
index d0c7752..c6d390e 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1408,6 +1408,7 @@ M:	Thor Thayer <tthayer@opensource.altera.com>
 S:	Maintained
 F:	drivers/edac/altera_edac.
 F:	arch/arm/mach-socfpga/l2_cache.*
+F:	arch/arm/mach-socfpga/ocram.*
 
 ARM/STI ARCHITECTURE
 M:	Srinivas Kandagatla <srinivas.kandagatla@gmail.com>
diff --git a/arch/arm/mach-socfpga/Makefile b/arch/arm/mach-socfpga/Makefile
index 142609e..1552ca5 100644
--- a/arch/arm/mach-socfpga/Makefile
+++ b/arch/arm/mach-socfpga/Makefile
@@ -5,3 +5,4 @@
 obj-y					:= socfpga.o
 obj-$(CONFIG_SMP)	+= headsmp.o platsmp.o
 obj-$(CONFIG_EDAC_ALTERA_L2C) += l2_cache.o
+obj-$(CONFIG_EDAC_ALTERA_OCRAM) += ocram.o
diff --git a/arch/arm/mach-socfpga/ocram.c b/arch/arm/mach-socfpga/ocram.c
new file mode 100644
index 0000000..9136009
--- /dev/null
+++ b/arch/arm/mach-socfpga/ocram.c
@@ -0,0 +1,90 @@
+/*
+ * Copyright Altera Corporation (C) 2014. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/clk-provider.h>
+#include <linux/genalloc.h>
+#include <linux/of_platform.h>
+
+#include "ocram.h"
+
+void socfpga_init_ocram_ecc(void)
+{
+	struct device_node *np;
+	const __be32 *prop;
+	u32 ocr_edac_addr, iram_addr, len;
+	void __iomem  *mapped_ocr_edac_addr;
+	size_t size;
+	struct gen_pool *gp;
+
+	np = of_find_compatible_node(NULL, NULL, "altr,ocram-edac");
+	if (!np) {
+		pr_err("SOCFPGA: Unable to find altr,ocram-edac in dtb\n");
+		return;
+	}
+
+	prop = of_get_property(np, "reg", &size);
+	ocr_edac_addr = be32_to_cpup(prop++);
+	len = be32_to_cpup(prop);
+	if (!prop || size < sizeof(*prop)) {
+		pr_err("SOCFPGA: Unable to find OCRAM ECC mapping in dtb\n");
+		return;
+	}
+
+	gp = of_get_named_gen_pool(np, "iram", 0);
+	if (!gp) {
+		pr_err("SOCFPGA: OCRAM cannot find gen pool\n");
+		return;
+	}
+
+	np = of_find_compatible_node(NULL, NULL, "mmio-sram");
+	if (!np) {
+		pr_err("SOCFPGA: Unable to find mmio-sram in dtb\n");
+		return;
+	}
+	/* Determine the OCRAM address and size */
+	prop = of_get_property(np, "reg", &size);
+	iram_addr = be32_to_cpup(prop++);
+	len = be32_to_cpup(prop);
+
+	if (!prop || size < sizeof(*prop)) {
+		pr_err("SOCFPGA: Unable to find OCRAM mapping in dtb\n");
+		return;
+	}
+
+	iram_addr = gen_pool_alloc(gp, len);
+	if (iram_addr == 0) {
+		pr_err("SOCFPGA: cannot alloc from gen pool\n");
+		return;
+	}
+
+	memset((void *)iram_addr, 0, len);
+
+	gen_pool_free(gp, iram_addr, len);
+
+	mapped_ocr_edac_addr = ioremap(ocr_edac_addr, 4);
+	if (!mapped_ocr_edac_addr) {
+		pr_err("SOCFPGA: Unable to map OCRAM ecc regs.\n");
+		return;
+	}
+
+	/* Clear any pending OCRAM ECC interrupts, then enable ECC */
+	writel(0x18, mapped_ocr_edac_addr);
+	writel(0x19, mapped_ocr_edac_addr);
+
+	iounmap(mapped_ocr_edac_addr);
+
+	pr_debug("SOCFPGA: Success Initializing OCRAM\n");
+}
+
diff --git a/arch/arm/mach-socfpga/ocram.h b/arch/arm/mach-socfpga/ocram.h
new file mode 100644
index 0000000..f93cf84
--- /dev/null
+++ b/arch/arm/mach-socfpga/ocram.h
@@ -0,0 +1,28 @@
+/*
+ * Copyright Altera Corporation (C) 2014. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef MACH_SOCFPGA_OCRAM_H
+#define MACH_SOCFPGA_OCRAM_H
+
+#ifdef CONFIG_EDAC_ALTERA_OCRAM
+void socfpga_init_ocram_ecc(void);
+#else
+inline void socfpga_init_ocram_ecc(void)
+{
+}
+#endif
+
+#endif /* #ifndef MACH_SOCFPGA_OCRAM_H */
diff --git a/arch/arm/mach-socfpga/socfpga.c b/arch/arm/mach-socfpga/socfpga.c
index af6413a..fb41aca 100644
--- a/arch/arm/mach-socfpga/socfpga.c
+++ b/arch/arm/mach-socfpga/socfpga.c
@@ -101,6 +101,13 @@ static void socfpga_cyclone5_restart(enum reboot_mode mode, const char *cmd)
 	writel(temp, rst_manager_base_addr + SOCFPGA_RSTMGR_CTRL);
 }
 
+static void __init socfpga_cyclone5_init(void)
+{
+	of_platform_populate(NULL, of_default_bus_match_table,
+			     NULL, NULL);
+	socfpga_init_ocram_ecc();
+}
+
 static const char *altera_dt_match[] = {
 	"altr,socfpga",
 	NULL
@@ -112,6 +119,7 @@ DT_MACHINE_START(SOCFPGA, "Altera SOCFPGA")
 	.smp		= smp_ops(socfpga_smp_ops),
 	.map_io		= socfpga_map_io,
 	.init_irq	= socfpga_init_irq,
+	.init_machine	= socfpga_cyclone5_init,
 	.restart	= socfpga_cyclone5_restart,
 	.dt_compat	= altera_dt_match,
 MACHINE_END
-- 
1.7.9.5

  parent reply	other threads:[~2014-10-30 15:32 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-10-30 15:32 [PATCHv3 0/5] Add Altera peripheral memories to EDAC framework tthayer
2014-10-30 15:32 ` [PATCHv3 1/5] arm: socfpga: Enable L2 Cache ECC on startup tthayer
2014-10-30 15:32 ` tthayer [this message]
2014-10-30 15:32 ` [PATCHv3 3/5] edac: altera: Remove SDRAM module compile tthayer
2014-10-30 15:32 ` [PATCHv3 4/5] edac: altera: Add Altera L2 Cache and OCRAM EDAC Support tthayer
2014-11-04 15:12   ` Borislav Petkov
2014-11-04 22:57     ` Thor Thayer
2014-11-06 16:31       ` Borislav Petkov
     [not found]         ` <20141106163134.GF4318-fF5Pk5pvG8Y@public.gmane.org>
2014-11-07 16:31           ` Dinh Nguyen
     [not found]             ` <545CF3D8.1020500-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org>
2014-11-07 16:51               ` Borislav Petkov
2014-10-30 15:32 ` [PATCHv3 5/5] arm: dts: Add Altera L2 Cache and OCRAM EDAC tthayer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1414683131-20786-3-git-send-email-tthayer@opensource.altera.com \
    --to=tthayer@opensource.altera.com \
    --cc=bp@alien8.de \
    --cc=devicetree@vger.kernel.org \
    --cc=dinguyen@opensource.altera.com \
    --cc=dougthompson@xmission.com \
    --cc=galak@codeaurora.org \
    --cc=grant.likely@linaro.org \
    --cc=ijc+devicetree@hellion.org.uk \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-edac@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@arm.linux.org.uk \
    --cc=m.chehab@samsung.com \
    --cc=mark.rutland@arm.com \
    --cc=pawel.moll@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=tthayer.linux@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).