From: Caesar Wang <caesar.wang-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
To: heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org,
rui.zhang-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org,
edubezval-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org
Cc: zyf-TNX95d0MmH7DzftRWevZcw@public.gmane.org,
dianders-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org,
linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-pm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-doc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
cf-TNX95d0MmH7DzftRWevZcw@public.gmane.org,
dmitry.torokhov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
dbasehore-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org,
huangtao-TNX95d0MmH7DzftRWevZcw@public.gmane.org,
cjf-TNX95d0MmH7DzftRWevZcw@public.gmane.org,
zhengsq-TNX95d0MmH7DzftRWevZcw@public.gmane.org,
fzf-TNX95d0MmH7DzftRWevZcw@public.gmane.org,
Caesar Wang <caesar.wang-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
Subject: [PATCH v17 4/5] ARM: dts: add main Thermal info to rk3288
Date: Sat, 1 Nov 2014 10:44:32 +0800 [thread overview]
Message-ID: <1414809873-32227-5-git-send-email-caesar.wang@rock-chips.com> (raw)
In-Reply-To: <1414809873-32227-1-git-send-email-caesar.wang-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
This patch is depend on rk3288-thermal.dtsi,or
it will compile error.
If for some reason we are unable to shut it down
in orderly fashion (kernel is stuck holding a lock or
similar), then hardware TSHUT will reset it.
If the temperature over a period of time High,over 105C
the resulting TSHUT gave CRU module,let it reset
the entire chip,or via GPIO give PMIC.
Signed-off-by: Caesar Wang <caesar.wang-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
arch/arm/boot/dts/rk3288.dtsi | 25 +++++++++++++++++++++++++
1 file changed, 25 insertions(+)
diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index cb18bb4..85855a6 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -15,6 +15,7 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/pinctrl/rockchip.h>
#include <dt-bindings/clock/rk3288-cru.h>
+#include <dt-bindings/thermal/thermal.h>
#include "skeleton.dtsi"
/ {
@@ -66,6 +67,7 @@
216000 900000
126000 900000
>;
+ #cooling-cells = <2>; /* min followed by max */
clock-latency = <40000>;
clocks = <&cru ARMCLK>;
};
@@ -346,6 +348,23 @@
status = "disabled";
};
+ thermal-zones {
+ #include "rk3288-thermal.dtsi"
+ };
+
+ tsadc: tsadc@ff280000 {
+ compatible = "rockchip,rk3288-tsadc";
+ reg = <0xff280000 0x100>;
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>;
+ clock-names = "tsadc", "apb_pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&otp_out>;
+ #thermal-sensor-cells = <1>;
+ rockchip,hw-tshut-temp = <105000>;
+ status = "disabled";
+ };
+
usb_host0_ehci: usb@ff500000 {
compatible = "generic-ehci";
reg = <0xff500000 0x100>;
@@ -965,6 +984,12 @@
};
};
+ tsadc {
+ otp_out: otp-out {
+ rockchip,pins = <0 10 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
pwm0 {
pwm0_pin: pwm0-pin {
rockchip,pins = <7 0 RK_FUNC_1 &pcfg_pull_none>;
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2014-11-01 2:44 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-11-01 2:44 [PATCH v17 0/5] Rockchip soc thermal driver Caesar Wang
2014-11-01 2:44 ` [PATCH v17 1/5] thermal: rockchip: add driver for thermal Caesar Wang
2014-11-05 10:11 ` [v17,1/5] " Caesar Wang
2014-11-07 1:30 ` [PATCH v17 1/5] " Eduardo Valentin
2014-11-07 1:57 ` Dmitry Torokhov
2014-11-07 23:39 ` Eduardo Valentin
2014-11-01 2:44 ` [PATCH v17 2/5] dt-bindings: document Rockchip thermal Caesar Wang
2014-11-01 2:44 ` [PATCH v17 3/5] ARM: dts: add RK3288 Thermal data Caesar Wang
[not found] ` <1414809873-32227-1-git-send-email-caesar.wang-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
2014-11-01 2:44 ` Caesar Wang [this message]
2014-11-01 2:44 ` [PATCH v17 5/5] ARM: dts: enable Thermal on rk3288-evb board Caesar Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1414809873-32227-5-git-send-email-caesar.wang@rock-chips.com \
--to=caesar.wang-tnx95d0mmh7dzftrwevzcw@public.gmane.org \
--cc=cf-TNX95d0MmH7DzftRWevZcw@public.gmane.org \
--cc=cjf-TNX95d0MmH7DzftRWevZcw@public.gmane.org \
--cc=dbasehore-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=dianders-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org \
--cc=dmitry.torokhov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=edubezval-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=fzf-TNX95d0MmH7DzftRWevZcw@public.gmane.org \
--cc=heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org \
--cc=huangtao-TNX95d0MmH7DzftRWevZcw@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-doc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-pm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=rui.zhang-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
--cc=zhengsq-TNX95d0MmH7DzftRWevZcw@public.gmane.org \
--cc=zyf-TNX95d0MmH7DzftRWevZcw@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).