devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Xudong Chen <xudong.chen-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
To: Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
	arm-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
	Matthias Brugger
	<matthias.bgg-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
	Wolfram Sang <wsa-z923LK4zBo2bacvFa/9K2g@public.gmane.org>
Cc: srv_heupstream-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org,
	Sascha Hauer <kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>,
	Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
	Pawel Moll <pawel.moll-5wv7dgnIgG8@public.gmane.org>,
	Ian Campbell
	<ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org>,
	Kumar Gala <galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>,
	Russell King <linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org>,
	Grant Likely
	<grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
	Xudong Chen <xudong.chen-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>,
	Jean Delvare <jdelvare-l3A5Bk7waGM@public.gmane.org>,
	Arnd Bergmann <arnd-r2nGTMty4D4@public.gmane.org>,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	Yingjoe Chen
	<yingjoe.chen-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>,
	Eddie Huang <eddie.huang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>,
	Nathan Chung
	<nathan.chung-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>,
	YH Chen <yh.chen-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
Subject: [PATCH v2 1/3] dt-bindings: Add I2C bindings for mt65xx/mt81xx.
Date: Tue, 4 Nov 2014 13:29:35 +0800	[thread overview]
Message-ID: <1415078977-18374-2-git-send-email-xudong.chen@mediatek.com> (raw)
In-Reply-To: <1415078977-18374-1-git-send-email-xudong.chen-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>

Add devicetree bindings for Mediatek Soc I2C driver.

Signed-off-by: Xudong Chen <xudong.chen-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
---
 .../devicetree/bindings/i2c/i2c-mt6577.txt         | 39 ++++++++++++++++++++++
 1 file changed, 39 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/i2c/i2c-mt6577.txt

diff --git a/Documentation/devicetree/bindings/i2c/i2c-mt6577.txt b/Documentation/devicetree/bindings/i2c/i2c-mt6577.txt
new file mode 100644
index 0000000..733e65e
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-mt6577.txt
@@ -0,0 +1,39 @@
+* Mediatek's I2C controller
+
+The Mediatek's I2C controller is used to interface with I2C devices.
+
+Required properties:
+  - compatible: value should be either of the following.
+      (a) "mediatek,mt6577-i2c", for i2c compatible with mt6577 i2c.
+      (b) "mediatek,mt6589-i2c", for i2c compatible with mt6589 i2c.
+      (c) "mediatek,mt8127-i2c", for i2c compatible with mt8127 i2c.
+      (d) "mediatek,mt8135-i2c", for i2c compatible with mt8135 i2c.
+  - reg: physical base address of the controller and dma base, length of memory mapped
+    region.
+  - interrupts: interrupt number to the cpu.
+  - clock-div: the fixed value for frequency divider of clock source in i2c module.
+    Each IC may be different.
+  - clocks: clock name from clock manager
+  - clock-names: clock name used in i2c driver probe
+
+Optional properties:
+  - clock-frequency: Frequency in Hz of the bus when transfer, the default value is 100000.
+  - mediatek,have-pmic: platform can control i2c form special pmic side.
+    Only mt6589 and mt8135 support this feature.
+  - mediatek,have-dcm: platform has DCM(hardware digital clock manager) property.
+  - mediatek,use-push-pull: IO use push-pull mode.
+
+Example:
+
+	i2c0: i2c@1100d000 {
+			compatible = "mediatek,mt6577-i2c";
+			reg = <0x1100d000 0x70>,
+			      <0x11000300 0x80>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_LOW>;
+			clock-frequency = <100000>;
+			mediatek,have-pmic;
+			clock-div = <16>;
+			clocks = <&i2c0_ck>, <&ap_dma_ck>;
+			clock-names = "main", "dma";
+	};
+
-- 
1.8.1.1.dirty

  parent reply	other threads:[~2014-11-04  5:29 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-11-04  5:29 [PATCH v2 0/3] ARM: mediatek: Add driver for Mediatek I2C controller Xudong Chen
2014-11-04  5:29 ` [PATCH v2 3/3] I2C: mediatek: Add driver for MediaTek " Xudong Chen
     [not found] ` <1415078977-18374-1-git-send-email-xudong.chen-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
2014-11-04  5:29   ` Xudong Chen [this message]
     [not found]     ` <1415078977-18374-2-git-send-email-xudong.chen-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
2014-11-13 18:16       ` [PATCH v2 1/3] dt-bindings: Add I2C bindings for mt65xx/mt81xx Wolfram Sang
2014-11-14  3:13         ` xudong chen
2014-11-04  5:29   ` [PATCH v2 2/3] ARM: mediatek: Add I2C node for mt8135 and mt8127 Xudong Chen
2014-11-13  2:08   ` [PATCH v2 0/3] ARM: mediatek: Add driver for Mediatek I2C controller xudong chen
2014-11-13 18:31   ` Wolfram Sang
2014-11-14  3:12     ` xudong chen
2014-11-14  8:00       ` Yingjoe Chen
2014-11-18 10:07       ` xudong chen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1415078977-18374-2-git-send-email-xudong.chen@mediatek.com \
    --to=xudong.chen-nus5lvnupcjwk0htik3j/w@public.gmane.org \
    --cc=arm-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    --cc=arnd-r2nGTMty4D4@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=eddie.huang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org \
    --cc=galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
    --cc=grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
    --cc=ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org \
    --cc=jdelvare-l3A5Bk7waGM@public.gmane.org \
    --cc=kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
    --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org \
    --cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
    --cc=matthias.bgg-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    --cc=nathan.chung-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org \
    --cc=pawel.moll-5wv7dgnIgG8@public.gmane.org \
    --cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    --cc=srv_heupstream-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org \
    --cc=wsa-z923LK4zBo2bacvFa/9K2g@public.gmane.org \
    --cc=yh.chen-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org \
    --cc=yingjoe.chen-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).