From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefan Agner Subject: [PATCH 0/3] ARM: dts: vf610: USB/GPIO fixes Date: Tue, 4 Nov 2014 14:07:07 +0100 Message-ID: <1415106430-6271-1-git-send-email-stefan@agner.ch> Return-path: Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org, kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org Cc: linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, stefan-XLVq0VzYD2Y@public.gmane.org List-Id: devicetree@vger.kernel.org Hi Shawn, This patchset collects some vf610 device tree fixes. The first patch was part of the "vf610: Add GPIO support" patchset. GPIO support is merged by know, so I rebased that on top of your for-next branch. The second patch is a USB fix I uncovered while testing the 3rd patch, which adds regulators, mainly for proper USB VBUS support, as we have them on our carrier boards. Stefan Agner (3): ARM: dts: vf610: use new GPIO support ARM: dts: vf610: enable USB misc/phy nodes where necessary ARM: dts: vf-colibri: add USB regulators arch/arm/boot/dts/vf-colibri-eval-v3.dtsi | 45 ++++++++++++++++++++++++++++++- arch/arm/boot/dts/vf-colibri.dtsi | 37 +++++++++++++++++++++++++ arch/arm/boot/dts/vf610-twr.dts | 9 +++++++ arch/arm/boot/dts/vfxxx.dtsi | 1 + 4 files changed, 91 insertions(+), 1 deletion(-) -- 2.1.3 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html