From mboxrd@z Thu Jan 1 00:00:00 1970 From: Geert Uytterhoeven Subject: [PATCH 1/5] ARM: shmobile: kzm9g legacy: Set i2c clks_per_count to 2 Date: Thu, 6 Nov 2014 12:52:06 +0100 Message-ID: <1415274730-310-2-git-send-email-geert+renesas@glider.be> References: <1415274730-310-1-git-send-email-geert+renesas@glider.be> Return-path: In-Reply-To: <1415274730-310-1-git-send-email-geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org> Sender: linux-i2c-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Wolfram Sang , Simon Horman , Magnus Damm Cc: linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-sh-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Geert Uytterhoeven List-Id: devicetree@vger.kernel.org On sh73a0/kzm9g-legacy, probing of the i2c masters fails with: i2c-sh_mobile i2c-sh_mobile.0: timing values out of range: L/H=0x208/0x1bf sh_mobile: probe of i2c-sh_mobile.0 failed with error -22 According to the datasheet, the transfer rate is derived from the HP clock (which runs at 104 MHz) divided by two. Hence i2c_sh_mobile_platform_data.clks_per_count should be set to two. Now probing succeeds, and i2c works: i2c-sh_mobile i2c-sh_mobile.0: I2C adapter 0 with bus speed 100000 Hz (L/H=0x104/0xe0) Signed-off-by: Geert Uytterhoeven --- Note that the L/H values still differ from the Transfer Rate Settings example in Table 19.3 of the datasheet, which suggests 0x121/0xe7. arch/arm/mach-shmobile/setup-sh73a0.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/arch/arm/mach-shmobile/setup-sh73a0.c b/arch/arm/mach-shmobile/setup-sh73a0.c index 2955a08a655d8889..179c2b65be9f6829 100644 --- a/arch/arm/mach-shmobile/setup-sh73a0.c +++ b/arch/arm/mach-shmobile/setup-sh73a0.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include #include @@ -188,11 +189,18 @@ static struct resource i2c4_resources[] = { }, }; +static struct i2c_sh_mobile_platform_data i2c_platform_data = { + .clks_per_count = 2, +}; + static struct platform_device i2c0_device = { .name = "i2c-sh_mobile", .id = 0, .resource = i2c0_resources, .num_resources = ARRAY_SIZE(i2c0_resources), + .dev = { + .platform_data = &i2c_platform_data, + }, }; static struct platform_device i2c1_device = { @@ -200,6 +208,9 @@ static struct platform_device i2c1_device = { .id = 1, .resource = i2c1_resources, .num_resources = ARRAY_SIZE(i2c1_resources), + .dev = { + .platform_data = &i2c_platform_data, + }, }; static struct platform_device i2c2_device = { @@ -207,6 +218,9 @@ static struct platform_device i2c2_device = { .id = 2, .resource = i2c2_resources, .num_resources = ARRAY_SIZE(i2c2_resources), + .dev = { + .platform_data = &i2c_platform_data, + }, }; static struct platform_device i2c3_device = { @@ -214,6 +228,9 @@ static struct platform_device i2c3_device = { .id = 3, .resource = i2c3_resources, .num_resources = ARRAY_SIZE(i2c3_resources), + .dev = { + .platform_data = &i2c_platform_data, + }, }; static struct platform_device i2c4_device = { @@ -221,6 +238,9 @@ static struct platform_device i2c4_device = { .id = 4, .resource = i2c4_resources, .num_resources = ARRAY_SIZE(i2c4_resources), + .dev = { + .platform_data = &i2c_platform_data, + }, }; static const struct sh_dmae_slave_config sh73a0_dmae_slaves[] = { -- 1.9.1