From: Geert Uytterhoeven <geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org>
To: Wolfram Sang <wsa-z923LK4zBo2bacvFa/9K2g@public.gmane.org>,
Simon Horman <horms-/R6kz+dDXgpPR4JQBCEnsQ@public.gmane.org>,
Magnus Damm <magnus.damm-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-sh-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Geert Uytterhoeven
<geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org>
Subject: [PATCH 4/5] ARM: shmobile: sh73a0 dtsi: Add SoC-specific IIC compatible properties
Date: Thu, 6 Nov 2014 12:52:09 +0100 [thread overview]
Message-ID: <1415274730-310-5-git-send-email-geert+renesas@glider.be> (raw)
In-Reply-To: <1415274730-310-1-git-send-email-geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org>
The IIC nodes used the generic compatible properties only.
This causes the driver to fail when using Standard Speed, as the
operational clock is driven by the 104 MHz HP clock:
i2c-sh_mobile e6820000.i2c: timing values out of range: L/H=0x208/0x1bf
i2c-sh_mobile: probe of e6820000.i2c failed with error -22
Add the SoC-specific compatible property to fix this.
Signed-off-by: Geert Uytterhoeven <geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org>
---
arch/arm/boot/dts/sh73a0.dtsi | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi
index 030a5920312fa19b..d8def5a529da2882 100644
--- a/arch/arm/boot/dts/sh73a0.dtsi
+++ b/arch/arm/boot/dts/sh73a0.dtsi
@@ -138,7 +138,7 @@
i2c0: i2c@e6820000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "renesas,rmobile-iic";
+ compatible = "renesas,iic-sh73a0", "renesas,rmobile-iic";
reg = <0xe6820000 0x425>;
interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH
0 168 IRQ_TYPE_LEVEL_HIGH
@@ -150,7 +150,7 @@
i2c1: i2c@e6822000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "renesas,rmobile-iic";
+ compatible = "renesas,iic-sh73a0", "renesas,rmobile-iic";
reg = <0xe6822000 0x425>;
interrupts = <0 51 IRQ_TYPE_LEVEL_HIGH
0 52 IRQ_TYPE_LEVEL_HIGH
@@ -162,7 +162,7 @@
i2c2: i2c@e6824000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "renesas,rmobile-iic";
+ compatible = "renesas,iic-sh73a0", "renesas,rmobile-iic";
reg = <0xe6824000 0x425>;
interrupts = <0 171 IRQ_TYPE_LEVEL_HIGH
0 172 IRQ_TYPE_LEVEL_HIGH
@@ -174,7 +174,7 @@
i2c3: i2c@e6826000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "renesas,rmobile-iic";
+ compatible = "renesas,iic-sh73a0", "renesas,rmobile-iic";
reg = <0xe6826000 0x425>;
interrupts = <0 183 IRQ_TYPE_LEVEL_HIGH
0 184 IRQ_TYPE_LEVEL_HIGH
@@ -186,7 +186,7 @@
i2c4: i2c@e6828000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "renesas,rmobile-iic";
+ compatible = "renesas,iic-sh73a0", "renesas,rmobile-iic";
reg = <0xe6828000 0x425>;
interrupts = <0 187 IRQ_TYPE_LEVEL_HIGH
0 188 IRQ_TYPE_LEVEL_HIGH
--
1.9.1
next prev parent reply other threads:[~2014-11-06 11:52 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-11-06 11:52 [PATCH 0/5] ARM: shmobile: sh73a0/r8a73a4: i2c-sh_mobile fixes Geert Uytterhoeven
[not found] ` <1415274730-310-1-git-send-email-geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org>
2014-11-06 11:52 ` [PATCH 1/5] ARM: shmobile: kzm9g legacy: Set i2c clks_per_count to 2 Geert Uytterhoeven
[not found] ` <1415274730-310-2-git-send-email-geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org>
2014-11-07 5:24 ` Wolfram Sang
2014-11-07 7:12 ` Geert Uytterhoeven
2014-11-10 1:02 ` Simon Horman
2014-11-12 1:44 ` Simon Horman
2014-11-12 8:53 ` Geert Uytterhoeven
2014-11-12 8:55 ` Geert Uytterhoeven
[not found] ` <CAMuHMdXoiX6CreDJNaDHcmsifX0C+TRRvTy4JWYBc2c-MVT_Qw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-11-12 9:05 ` Simon Horman
[not found] ` <CAMuHMdUUspG8-dYGiO7cmuECBLpfmQAYg=B8ZpajxRXhaEUJ2A-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-11-12 9:04 ` Simon Horman
2014-11-06 11:52 ` [PATCH 2/5] i2c: sh_mobile: Add support for r8a73a4 and sh73a0 Geert Uytterhoeven
[not found] ` <1415274730-310-3-git-send-email-geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org>
2014-11-07 17:53 ` Wolfram Sang
2014-11-06 11:52 ` [PATCH 3/5] i2c: sh_mobile: Document SoC-specific bindings Geert Uytterhoeven
[not found] ` <1415274730-310-4-git-send-email-geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org>
2014-11-07 4:17 ` Simon Horman
2014-11-07 17:53 ` Wolfram Sang
2014-11-10 1:05 ` Simon Horman
2014-11-06 11:52 ` Geert Uytterhoeven [this message]
[not found] ` <1415274730-310-5-git-send-email-geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org>
2014-11-07 5:25 ` [PATCH 4/5] ARM: shmobile: sh73a0 dtsi: Add SoC-specific IIC compatible properties Wolfram Sang
2014-11-10 1:04 ` Simon Horman
2014-11-06 11:52 ` [PATCH 5/5] ARM: shmobile: r8a73a4 " Geert Uytterhoeven
2014-11-07 5:26 ` Wolfram Sang
2014-11-10 1:04 ` Simon Horman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1415274730-310-5-git-send-email-geert+renesas@glider.be \
--to=geert+renesas-gxvu3+zwzmszqb+pc5nmwq@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=horms-/R6kz+dDXgpPR4JQBCEnsQ@public.gmane.org \
--cc=linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-sh-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=magnus.damm-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=wsa-z923LK4zBo2bacvFa/9K2g@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).