From: Kevin Cernekee <cernekee@gmail.com>
To: tglx@linutronix.de, jason@lakedaemon.net, linux-sh@vger.kernel.org
Cc: arnd@arndb.de, f.fainelli@gmail.com, ralf@linux-mips.org,
sergei.shtylyov@cogentembedded.com, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org, mbizon@freebox.fr, jogo@openwrt.org,
linux-mips@linux-mips.org
Subject: [PATCH V4 12/14] irqchip: bcm7120-l2: Decouple driver from brcmstb-l2
Date: Thu, 6 Nov 2014 22:44:27 -0800 [thread overview]
Message-ID: <1415342669-30640-13-git-send-email-cernekee@gmail.com> (raw)
In-Reply-To: <1415342669-30640-1-git-send-email-cernekee@gmail.com>
Some chips, such as BCM6328, only require bcm7120-l2. Some BCM7xxx STB
configurations only require brcmstb-l2. Treat them as two separate
entities, and update the mach-bcm dependencies to reflect the change.
Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/arm/mach-bcm/Kconfig | 1 +
drivers/irqchip/Kconfig | 5 +++++
drivers/irqchip/Makefile | 4 ++--
drivers/irqchip/irq-bcm7120-l2.c | 2 +-
4 files changed, 9 insertions(+), 3 deletions(-)
diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig
index 2abad74..bf47eb0 100644
--- a/arch/arm/mach-bcm/Kconfig
+++ b/arch/arm/mach-bcm/Kconfig
@@ -125,6 +125,7 @@ config ARCH_BRCMSTB
select HAVE_ARM_ARCH_TIMER
select BRCMSTB_GISB_ARB
select BRCMSTB_L2_IRQ
+ select BCM7120_L2_IRQ
help
Say Y if you intend to run the kernel on a Broadcom ARM-based STB
chipset.
diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index 09c79d1..afdc1f3 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -48,6 +48,11 @@ config ATMEL_AIC5_IRQ
select MULTI_IRQ_HANDLER
select SPARSE_IRQ
+config BCM7120_L2_IRQ
+ bool
+ select GENERIC_IRQ_CHIP
+ select IRQ_DOMAIN
+
config BRCMSTB_L2_IRQ
bool
select GENERIC_IRQ_CHIP
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index 173bb5f..f0909d0 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -35,6 +35,6 @@ obj-$(CONFIG_TB10X_IRQC) += irq-tb10x.o
obj-$(CONFIG_XTENSA) += irq-xtensa-pic.o
obj-$(CONFIG_XTENSA_MX) += irq-xtensa-mx.o
obj-$(CONFIG_IRQ_CROSSBAR) += irq-crossbar.o
-obj-$(CONFIG_BRCMSTB_L2_IRQ) += irq-brcmstb-l2.o \
- irq-bcm7120-l2.o
+obj-$(CONFIG_BCM7120_L2_IRQ) += irq-bcm7120-l2.o
+obj-$(CONFIG_BRCMSTB_L2_IRQ) += irq-brcmstb-l2.o
obj-$(CONFIG_KEYSTONE_IRQ) += irq-keystone.o
diff --git a/drivers/irqchip/irq-bcm7120-l2.c b/drivers/irqchip/irq-bcm7120-l2.c
index ef4d32c..e53a3a6 100644
--- a/drivers/irqchip/irq-bcm7120-l2.c
+++ b/drivers/irqchip/irq-bcm7120-l2.c
@@ -247,5 +247,5 @@ out_unmap:
kfree(data);
return ret;
}
-IRQCHIP_DECLARE(brcmstb_l2_intc, "brcm,bcm7120-l2-intc",
+IRQCHIP_DECLARE(bcm7120_l2_intc, "brcm,bcm7120-l2-intc",
bcm7120_l2_intc_of_init);
--
2.1.1
next prev parent reply other threads:[~2014-11-07 6:44 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-11-07 6:44 [PATCH V4 00/14] genirq endian fixes; bcm7120/brcmstb IRQ updates Kevin Cernekee
2014-11-07 6:44 ` [PATCH V4 01/14] sh: Eliminate unused irq_reg_{readl,writel} accessors Kevin Cernekee
2014-11-10 8:13 ` Geert Uytterhoeven
2014-11-14 16:38 ` Ralf Baechle
2014-11-14 17:05 ` Jason Cooper
2014-11-16 9:34 ` Geert Uytterhoeven
2015-01-19 19:13 ` Geert Uytterhoeven
2015-01-24 17:51 ` Thomas Gleixner
2015-01-25 10:13 ` Geert Uytterhoeven
2014-11-07 6:44 ` [PATCH V4 02/14] genirq: Generic chip: Change irq_reg_{readl,writel} arguments Kevin Cernekee
2014-11-07 6:44 ` [PATCH V4 03/14] genirq: Generic chip: Allow irqchip drivers to override irq_reg_{readl,writel} Kevin Cernekee
2014-11-07 6:44 ` [PATCH V4 04/14] genirq: Generic chip: Add big endian I/O accessors Kevin Cernekee
2014-11-10 22:00 ` Kevin Hilman
2014-11-10 22:11 ` Kevin Cernekee
2014-11-10 23:03 ` Alexandre Belloni
2014-11-11 10:03 ` Boris Brezillon
2014-11-11 13:33 ` [PATCH] irqchip: atmel-aic: fix irqdomain initialization Boris Brezillon
2014-11-11 15:45 ` Kevin Hilman
2014-11-11 22:58 ` Jason Cooper
[not found] ` <20141111225800.GE3698-u4khhh1J0LxI1Ri9qeTfzeTW4wlIGRCZ@public.gmane.org>
2014-11-12 9:43 ` Boris Brezillon
2014-11-07 6:44 ` [PATCH V4 05/14] irqchip: brcmstb-l2: Eliminate dependency on ARM code Kevin Cernekee
2014-11-07 6:44 ` [PATCH V4 06/14] irqchip: bcm7120-l2: Eliminate bad IRQ check Kevin Cernekee
2014-11-07 6:44 ` [PATCH V4 07/14] irqchip: bcm7120-l2, brcmstb-l2: Remove ARM Kconfig dependency Kevin Cernekee
2014-11-07 6:44 ` [PATCH V4 08/14] irqchip: bcm7120-l2: Make sure all register accesses use base+offset Kevin Cernekee
2014-11-07 6:44 ` [PATCH V4 09/14] irqchip: bcm7120-l2: Fix missing nibble in gc->unused mask Kevin Cernekee
2014-11-07 6:44 ` [PATCH V4 11/14] irqchip: bcm7120-l2: Extend driver to support 64+ bit controllers Kevin Cernekee
2014-11-07 6:44 ` Kevin Cernekee [this message]
2014-11-07 6:44 ` [PATCH V4 13/14] irqchip: bcm7120-l2: Convert driver to use irq_reg_{readl,writel} Kevin Cernekee
[not found] ` <1415342669-30640-1-git-send-email-cernekee-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2014-11-07 6:44 ` [PATCH V4 10/14] irqchip: bcm7120-l2: Use gc->mask_cache to simplify suspend/resume functions Kevin Cernekee
2014-11-07 6:44 ` [PATCH V4 14/14] irqchip: brcmstb-l2: Convert driver to use irq_reg_{readl,writel} Kevin Cernekee
2014-11-07 12:27 ` [PATCH V4 00/14] genirq endian fixes; bcm7120/brcmstb IRQ updates Jason Cooper
[not found] ` <20141107122745.GJ3698-u4khhh1J0LxI1Ri9qeTfzeTW4wlIGRCZ@public.gmane.org>
2014-11-09 4:30 ` Jason Cooper
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1415342669-30640-13-git-send-email-cernekee@gmail.com \
--to=cernekee@gmail.com \
--cc=arnd@arndb.de \
--cc=devicetree@vger.kernel.org \
--cc=f.fainelli@gmail.com \
--cc=jason@lakedaemon.net \
--cc=jogo@openwrt.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@linux-mips.org \
--cc=linux-sh@vger.kernel.org \
--cc=mbizon@freebox.fr \
--cc=ralf@linux-mips.org \
--cc=sergei.shtylyov@cogentembedded.com \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).