From mboxrd@z Thu Jan 1 00:00:00 1970 From: Geert Uytterhoeven Subject: [PATCH v2 1/2] sata_rcar: Add clocks to sata_rcar bindings Date: Mon, 10 Nov 2014 19:42:29 +0100 Message-ID: <1415644950-2983-1-git-send-email-geert+renesas@glider.be> Return-path: Sender: linux-sh-owner@vger.kernel.org To: Tejun Heo Cc: Simon Horman , Magnus Damm , Valentine Barshak , linux-ide@vger.kernel.org, devicetree@vger.kernel.org, linux-sh@vger.kernel.org, Geert Uytterhoeven List-Id: devicetree@vger.kernel.org From: Valentine Barshak Now that the clocks are available in the R-Car Gen2 DT, add clocks property description to the sata_rcar bindings. The clocks have been tested on r8a7791 so we use that as an example of the R-Car SATA node. Signed-off-by: Valentine Barshak [geert: Reworded clocks property] Signed-off-by: Geert Uytterhoeven Acked-by: Simon Horman --- v2: - Add Acked-by --- Documentation/devicetree/bindings/ata/sata_rcar.txt | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/Documentation/devicetree/bindings/ata/sata_rcar.txt b/Documentation/devicetree/bindings/ata/sata_rcar.txt index 80ae87a0784bdba8..f09c1ee260ba1d10 100644 --- a/Documentation/devicetree/bindings/ata/sata_rcar.txt +++ b/Documentation/devicetree/bindings/ata/sata_rcar.txt @@ -9,12 +9,14 @@ Required properties: - "renesas,sata-r8a7793" for R-Car M2-N - reg : address and length of the SATA registers; - interrupts : must consist of one interrupt specifier. +- clocks : must contain a reference to the functional clock. Example: -sata: sata@fc600000 { - compatible = "renesas,sata-r8a7779"; - reg = <0xfc600000 0x2000>; +sata0: sata@ee300000 { + compatible = "renesas,sata-r8a7791"; + reg = <0 0xee300000 0 0x2000>; interrupt-parent = <&gic>; - interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp8_clks R8A7791_CLK_SATA0>; }; -- 1.9.1