From: Kevin Cernekee <cernekee@gmail.com>
To: ralf@linux-mips.org
Cc: f.fainelli@gmail.com, jfraser@broadcom.com, dtor@chromium.org,
tglx@linutronix.de, jason@lakedaemon.net,
linux-mips@linux-mips.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH V2 20/22] MAINTAINERS: Add entry for bcm63xx/bcm33xx UDC gadget driver
Date: Sat, 15 Nov 2014 16:17:44 -0800 [thread overview]
Message-ID: <1416097066-20452-21-git-send-email-cernekee@gmail.com> (raw)
In-Reply-To: <1416097066-20452-1-git-send-email-cernekee@gmail.com>
This hardware shows up on the newly-supported BCM3384 cable chip, as well
as several old BCM63xx DSL chips.
Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
---
MAINTAINERS | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index e5e8a55..6ab20b4 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2094,6 +2094,12 @@ S: Maintained
F: arch/arm/mach-bcm/bcm63xx.c
F: arch/arm/include/debug/bcm63xx.S
+BROADCOM BCM63XX/BCM33XX UDC DRIVER
+M: Kevin Cernekee <cernekee@gmail.com>
+L: linux-usb@vger.kernel.org
+S: Maintained
+F: drivers/usb/gadget/udc/bcm63xx_udc.*
+
BROADCOM BCM7XXX ARM ARCHITECTURE
M: Marc Carino <marc.ceeeee@gmail.com>
M: Brian Norris <computersforpeace@gmail.com>
--
2.1.1
next prev parent reply other threads:[~2014-11-16 0:17 UTC|newest]
Thread overview: 49+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-11-16 0:17 [PATCH V2 00/22] Multiplatform BMIPS kernel Kevin Cernekee
2014-11-16 0:17 ` [PATCH V2 01/22] irqchip: Update docs regarding irq_domain_add_tree() Kevin Cernekee
2014-11-16 0:17 ` [PATCH V2 02/22] irqchip: brcmstb-l2: fix error handling of irq_of_parse_and_map Kevin Cernekee
2014-11-16 0:17 ` [PATCH V2 04/22] irqchip: bcm7120-l2: Refactor driver for arbitrary IRQEN/IRQSTAT offsets Kevin Cernekee
2014-11-16 0:17 ` [PATCH V2 05/22] irqchip: bcm7120-l2: Change DT binding to allow non-contiguous IRQEN/IRQSTAT Kevin Cernekee
2014-11-16 0:17 ` [PATCH V2 06/22] irqchip: Add new driver for BCM7038-style level 1 interrupt controllers Kevin Cernekee
2014-11-16 0:17 ` [PATCH V2 07/22] MIPS: BMIPS: Fix ".previous without corresponding .section" warnings Kevin Cernekee
2014-11-16 0:17 ` [PATCH V2 08/22] MIPS: BMIPS: Align secondary boot sequence with latest firmware releases Kevin Cernekee
[not found] ` <1416097066-20452-1-git-send-email-cernekee-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2014-11-16 0:17 ` [PATCH V2 03/22] irqchip: bcm7120-l2: fix error handling of irq_of_parse_and_map Kevin Cernekee
2014-11-16 0:17 ` [PATCH V2 09/22] MIPS: BMIPS: Introduce helper function to change the reset vector Kevin Cernekee
2014-11-16 0:17 ` [PATCH V2 15/22] MIPS: BMIPS: Let each platform customize the CPU1 IRQ mask Kevin Cernekee
2014-11-16 0:17 ` [PATCH V2 16/22] MIPS: BMIPS: Add special cache handling in c-r4k.c Kevin Cernekee
2014-11-16 0:17 ` [PATCH V2 19/22] Documentation: DT: Add "mti" vendor prefix Kevin Cernekee
2014-11-20 3:04 ` [PATCH V2 00/22] Multiplatform BMIPS kernel Brian Norris
2014-11-20 3:55 ` Kevin Cernekee
[not found] ` <CAJiQ=7C8h-MAuRdgzZqx2=bg8bvy7v9pv7e7tGXWmA9ghYJiqQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-11-20 18:09 ` Florian Fainelli
[not found] ` <546E2E3E.5040305-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2014-11-20 20:13 ` Kevin Cernekee
2014-11-16 0:17 ` [PATCH V2 10/22] MIPS: BMIPS: Allow BMIPS3300 to utilize SMP ebase relocation code Kevin Cernekee
2014-11-20 23:40 ` Ralf Baechle
2014-11-16 0:17 ` [PATCH V2 11/22] MIPS: BMIPS: Mask off timer IRQs when hot-unplugging a CPU Kevin Cernekee
2014-11-16 0:17 ` [PATCH V2 12/22] MIPS: BMIPS: Explicitly configure reset vectors prior to secondary boot Kevin Cernekee
2014-11-16 0:17 ` [PATCH V2 13/22] MIPS: Allow MIPS_CPU_SCACHE to be used with different line sizes Kevin Cernekee
2014-11-16 0:17 ` [PATCH V2 14/22] MIPS: BMIPS: Fix L1_CACHE_SHIFT when BMIPS5000 is selected Kevin Cernekee
2014-11-16 0:17 ` [PATCH V2 17/22] MIPS: BMIPS: Add PRId for BMIPS5200 (Whirlwind) Kevin Cernekee
2014-11-16 0:17 ` [PATCH V2 18/22] MIPS: Create a helper function for DT setup Kevin Cernekee
2014-11-16 0:17 ` Kevin Cernekee [this message]
2014-11-16 0:17 ` [PATCH V2 21/22] MAINTAINERS: Add entry for BMIPS multiplatform kernel Kevin Cernekee
2014-11-16 0:17 ` [PATCH V2 22/22] MIPS: Add multiplatform BMIPS target Kevin Cernekee
2014-11-16 21:24 ` Arnd Bergmann
2014-11-16 22:12 ` Kevin Cernekee
[not found] ` <CAJiQ=7C-HniwXiVrqQg3cnFNNYGwoxHJf8JP-XYOqM1yWoyXaw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-11-17 12:16 ` Arnd Bergmann
2014-11-17 14:52 ` Jonas Gorski
[not found] ` <CAOiHx=ky5T7z3T3gX382d=3sw+gGUEfnwXwpcLGa_Oi5YyBwgw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-11-17 16:13 ` Arnd Bergmann
2014-11-17 17:19 ` Kevin Cernekee
[not found] ` <CAJiQ=7An5eZ3j2+Zkx1crV9pBSVodkEQ+6ESGcFk5z0tDV7cHA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-11-17 18:55 ` Arnd Bergmann
2014-11-17 19:47 ` Kevin Cernekee
2014-11-17 20:33 ` Arnd Bergmann
2014-11-17 21:57 ` Kevin Cernekee
[not found] ` <CAJiQ=7AhyAyN6Hnvtdowdh6oPknbPFMe-_PrPdzyCGe5H7eE1g-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-11-18 10:15 ` Arnd Bergmann
2014-11-17 17:01 ` Kevin Cernekee
[not found] ` <CAJiQ=7A29-v5mo1ybvE2UodOZx-FoGeBTHYcTZuX-LaqRaF1Lw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-11-17 18:46 ` Arnd Bergmann
2014-11-17 19:39 ` Kevin Cernekee
2014-11-17 20:40 ` Arnd Bergmann
2014-11-17 21:21 ` Kevin Cernekee
[not found] ` <CAJiQ=7B6Xwz2iqqH4vEG8WzPOzHj7NHsuGWqq49uy-E34RHp4A-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-11-17 23:06 ` Jonas Gorski
2014-11-18 10:19 ` Arnd Bergmann
[not found] ` <1416097066-20452-23-git-send-email-cernekee-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2014-11-17 14:44 ` Jonas Gorski
[not found] ` <CAOiHx=mGzPKO4N7KR+5FM1RfFDF+-wncdBz6PavR0q47Gtd2Jg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-11-17 20:35 ` Kevin Cernekee
[not found] ` <CAJiQ=7AMiRq8rbLmsKe0s9+vr91BRrL4s3mZWcsVgyS0bLgThw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-11-17 23:00 ` Jonas Gorski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1416097066-20452-21-git-send-email-cernekee@gmail.com \
--to=cernekee@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=dtor@chromium.org \
--cc=f.fainelli@gmail.com \
--cc=jason@lakedaemon.net \
--cc=jfraser@broadcom.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@linux-mips.org \
--cc=ralf@linux-mips.org \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).