From: Peter Griffin <peter.griffin@linaro.org>
To: linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, maxime.coquelin@st.com,
srinivas.kandagatla@gmail.com, patrice.chotard@st.com,
arnd@arndb.de
Cc: peter.griffin@linaro.org, lee.jones@linaro.org,
devicetree@vger.kernel.org
Subject: [PATCH v3 09/11] ARM: STi: DT: STiH410: Add STiH410 SoC and b2120 board support.
Date: Mon, 17 Nov 2014 16:48:02 +0000 [thread overview]
Message-ID: <1416242884-5261-10-git-send-email-peter.griffin@linaro.org> (raw)
In-Reply-To: <1416242884-5261-1-git-send-email-peter.griffin@linaro.org>
The STiH410 is an advanced multi-HD AVC processor with 3D graphics acceleration
and 1.5-GHz ARM Cortex-A9 SMP CPU part of the stih407 family.
It has wide connectivity including USB 3.0, PCI-e, SATA and gigabit ethernet.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/stih410-b2120.dts | 29 +++
arch/arm/boot/dts/stih410-clock.dtsi | 338 +++++++++++++++++++++++++++++++++++
arch/arm/boot/dts/stih410.dtsi | 14 ++
4 files changed, 382 insertions(+)
create mode 100644 arch/arm/boot/dts/stih410-b2120.dts
create mode 100644 arch/arm/boot/dts/stih410-clock.dtsi
create mode 100644 arch/arm/boot/dts/stih410.dtsi
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 38c89ca..04cf4a4 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -409,6 +409,7 @@ dtb-$(CONFIG_ARCH_SPEAR3XX)+= spear300-evb.dtb \
spear320-hmi.dtb
dtb-$(CONFIG_ARCH_SPEAR6XX)+= spear600-evb.dtb
dtb-$(CONFIG_ARCH_STI)+= stih407-b2120.dtb \
+ stih410-b2120.dtb \
stih415-b2000.dtb \
stih415-b2020.dtb \
stih416-b2000.dtb \
diff --git a/arch/arm/boot/dts/stih410-b2120.dts b/arch/arm/boot/dts/stih410-b2120.dts
new file mode 100644
index 0000000..972c17a
--- /dev/null
+++ b/arch/arm/boot/dts/stih410-b2120.dts
@@ -0,0 +1,29 @@
+/*
+ * Copyright (C) 2014 STMicroelectronics (R&D) Limited.
+ * Author: Peter Griffin <peter.griffin@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+#include "stih410.dtsi"
+#include "stihxxx-b2120.dtsi"
+/ {
+ model = "STiH410 B2120";
+ compatible = "st,stih410-b2120", "st,stih410";
+
+ chosen {
+ bootargs = "console=ttyAS0,115200";
+ linux,stdout-path = &sbc_serial0;
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x40000000 0x80000000>;
+ };
+
+ aliases {
+ ttyAS0 = &sbc_serial0;
+ };
+};
diff --git a/arch/arm/boot/dts/stih410-clock.dtsi b/arch/arm/boot/dts/stih410-clock.dtsi
new file mode 100644
index 0000000..6b5803a
--- /dev/null
+++ b/arch/arm/boot/dts/stih410-clock.dtsi
@@ -0,0 +1,338 @@
+/*
+ * Copyright (C) 2014 STMicroelectronics R&D Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <dt-bindings/clock/stih410-clks.h>
+/ {
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ compatible = "st,stih410-clk", "simple-bus";
+
+ /*
+ * Fixed 30MHz oscillator inputs to SoC
+ */
+ clk_sysin: clk-sysin {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <30000000>;
+ clock-output-names = "CLK_SYSIN";
+ };
+
+ /*
+ * ARM Peripheral clock for timers
+ */
+ arm_periph_clk: clk-m-a9-periphs {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&clk_m_a9>;
+ clock-div = <2>;
+ clock-mult = <1>;
+ };
+
+ /*
+ * A9 PLL.
+ */
+ clockgen-a9@92b0000 {
+ compatible = "st,clkgen-c32";
+ reg = <0x92b0000 0xffff>;
+
+ clockgen_a9_pll: clockgen-a9-pll {
+ #clock-cells = <1>;
+ compatible = "st,stih407-plls-c32-a9", "st,clkgen-plls-c32";
+
+ clocks = <&clk_sysin>;
+
+ clock-output-names = "clockgen-a9-pll-odf";
+ };
+ };
+
+ /*
+ * ARM CPU related clocks.
+ */
+ clk_m_a9: clk-m-a9@92b0000 {
+ #clock-cells = <0>;
+ compatible = "st,stih407-clkgen-a9-mux", "st,clkgen-mux";
+ reg = <0x92b0000 0x10000>;
+
+ clocks = <&clockgen_a9_pll 0>,
+ <&clockgen_a9_pll 0>,
+ <&clk_s_c0_flexgen 13>,
+ <&clk_m_a9_ext2f_div2>;
+ };
+
+ /*
+ * ARM Peripheral clock for timers
+ */
+ clk_m_a9_ext2f_div2: clk-m-a9-ext2f-div2s {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+
+ clocks = <&clk_s_c0_flexgen 13>;
+
+ clock-output-names = "clk-m-a9-ext2f-div2";
+
+ clock-div = <2>;
+ clock-mult = <1>;
+ };
+
+ /*
+ * Bootloader initialized system infrastructure clock for
+ * serial devices.
+ */
+ clk_ext2f_a9: clockgen-c0@13 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <200000000>;
+ clock-output-names = "clk-s-icn-reg-0";
+ };
+
+ clockgen-a@090ff000 {
+ compatible = "st,clkgen-c32";
+ reg = <0x90ff000 0x1000>;
+
+ clk_s_a0_pll: clk-s-a0-pll {
+ #clock-cells = <1>;
+ compatible = "st,stih407-plls-c32-a0", "st,clkgen-plls-c32";
+
+ clocks = <&clk_sysin>;
+
+ clock-output-names = "clk-s-a0-pll-ofd-0";
+ };
+
+ clk_s_a0_flexgen: clk-s-a0-flexgen {
+ compatible = "st,flexgen";
+
+ #clock-cells = <1>;
+
+ clocks = <&clk_s_a0_pll 0>,
+ <&clk_sysin>;
+
+ clock-output-names = "clk-ic-lmi0",
+ "clk-ic-lmi1";
+ };
+ };
+
+ clk_s_c0_quadfs: clk-s-c0-quadfs@9103000 {
+ #clock-cells = <1>;
+ compatible = "st,stih407-quadfs660-C", "st,quadfs";
+ reg = <0x9103000 0x1000>;
+
+ clocks = <&clk_sysin>;
+
+ clock-output-names = "clk-s-c0-fs0-ch0",
+ "clk-s-c0-fs0-ch1",
+ "clk-s-c0-fs0-ch2",
+ "clk-s-c0-fs0-ch3";
+ };
+
+ clk_s_c0: clockgen-c@09103000 {
+ compatible = "st,clkgen-c32";
+ reg = <0x9103000 0x1000>;
+
+ clk_s_c0_pll0: clk-s-c0-pll0 {
+ #clock-cells = <1>;
+ compatible = "st,stih407-plls-c32-c0_0", "st,clkgen-plls-c32";
+
+ clocks = <&clk_sysin>;
+
+ clock-output-names = "clk-s-c0-pll0-odf-0";
+ };
+
+ clk_s_c0_pll1: clk-s-c0-pll1 {
+ #clock-cells = <1>;
+ compatible = "st,stih407-plls-c32-c0_1", "st,clkgen-plls-c32";
+
+ clocks = <&clk_sysin>;
+
+ clock-output-names = "clk-s-c0-pll1-odf-0";
+ };
+
+ clk_s_c0_flexgen: clk-s-c0-flexgen {
+ #clock-cells = <1>;
+ compatible = "st,flexgen";
+
+ clocks = <&clk_s_c0_pll0 0>,
+ <&clk_s_c0_pll1 0>,
+ <&clk_s_c0_quadfs 0>,
+ <&clk_s_c0_quadfs 1>,
+ <&clk_s_c0_quadfs 2>,
+ <&clk_s_c0_quadfs 3>,
+ <&clk_sysin>;
+
+ clock-output-names = "clk-icn-gpu",
+ "clk-fdma",
+ "clk-nand",
+ "clk-hva",
+ "clk-proc-stfe",
+ "clk-proc-tp",
+ "clk-rx-icn-dmu",
+ "clk-rx-icn-hva",
+ "clk-icn-cpu",
+ "clk-tx-icn-dmu",
+ "clk-mmc-0",
+ "clk-mmc-1",
+ "clk-jpegdec",
+ "clk-ext2fa9",
+ "clk-ic-bdisp-0",
+ "clk-ic-bdisp-1",
+ "clk-pp-dmu",
+ "clk-vid-dmu",
+ "clk-dss-lpc",
+ "clk-st231-aud-0",
+ "clk-st231-gp-1",
+ "clk-st231-dmu",
+ "clk-icn-lmi",
+ "clk-tx-icn-disp-1",
+ "clk-icn-sbc",
+ "clk-stfe-frc2",
+ "clk-eth-phy",
+ "clk-eth-ref-phyclk",
+ "clk-flash-promip",
+ "clk-main-disp",
+ "clk-aux-disp",
+ "clk-compo-dvp",
+ "clk-tx-icn-hades",
+ "clk-rx-icn-hades",
+ "clk-icn-reg-16",
+ "clk-pp-hades",
+ "clk-clust-hades",
+ "clk-hwpe-hades",
+ "clk-fc-hades";
+ };
+ };
+
+ clk_s_d0_quadfs: clk-s-d0-quadfs@9104000 {
+ #clock-cells = <1>;
+ compatible = "st,stih407-quadfs660-D", "st,quadfs";
+ reg = <0x9104000 0x1000>;
+
+ clocks = <&clk_sysin>;
+
+ clock-output-names = "clk-s-d0-fs0-ch0",
+ "clk-s-d0-fs0-ch1",
+ "clk-s-d0-fs0-ch2",
+ "clk-s-d0-fs0-ch3";
+ };
+
+ clockgen-d0@09104000 {
+ compatible = "st,clkgen-c32";
+ reg = <0x9104000 0x1000>;
+
+ clk_s_d0_flexgen: clk-s-d0-flexgen {
+ #clock-cells = <1>;
+ compatible = "st,flexgen";
+
+ clocks = <&clk_s_d0_quadfs 0>,
+ <&clk_s_d0_quadfs 1>,
+ <&clk_s_d0_quadfs 2>,
+ <&clk_s_d0_quadfs 3>,
+ <&clk_sysin>;
+
+ clock-output-names = "clk-pcm-0",
+ "clk-pcm-1",
+ "clk-pcm-2",
+ "clk-spdiff",
+ "clk-pcmr10-master",
+ "clk-usb2-phy";
+ };
+ };
+
+ clk_s_d2_quadfs: clk-s-d2-quadfs@9106000 {
+ #clock-cells = <1>;
+ compatible = "st,stih407-quadfs660-D", "st,quadfs";
+ reg = <0x9106000 0x1000>;
+
+ clocks = <&clk_sysin>;
+
+ clock-output-names = "clk-s-d2-fs0-ch0",
+ "clk-s-d2-fs0-ch1",
+ "clk-s-d2-fs0-ch2",
+ "clk-s-d2-fs0-ch3";
+ };
+
+ clk_tmdsout_hdmi: clk-tmdsout-hdmi {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <0>;
+ };
+
+ clockgen-d2@x9106000 {
+ compatible = "st,clkgen-c32";
+ reg = <0x9106000 0x1000>;
+
+ clk_s_d2_flexgen: clk-s-d2-flexgen {
+ #clock-cells = <1>;
+ compatible = "st,flexgen";
+
+ clocks = <&clk_s_d2_quadfs 0>,
+ <&clk_s_d2_quadfs 1>,
+ <&clk_s_d2_quadfs 2>,
+ <&clk_s_d2_quadfs 3>,
+ <&clk_sysin>,
+ <&clk_sysin>,
+ <&clk_tmdsout_hdmi>;
+
+ clock-output-names = "clk-pix-main-disp",
+ "clk-pix-pip",
+ "clk-pix-gdp1",
+ "clk-pix-gdp2",
+ "clk-pix-gdp3",
+ "clk-pix-gdp4",
+ "clk-pix-aux-disp",
+ "clk-denc",
+ "clk-pix-hddac",
+ "clk-hddac",
+ "clk-sddac",
+ "clk-pix-dvo",
+ "clk-dvo",
+ "clk-pix-hdmi",
+ "clk-tmds-hdmi",
+ "clk-ref-hdmiphy";
+ };
+ };
+
+ clk_s_d3_quadfs: clk-s-d3-quadfs@9107000 {
+ #clock-cells = <1>;
+ compatible = "st,stih407-quadfs660-D", "st,quadfs";
+ reg = <0x9107000 0x1000>;
+
+ clocks = <&clk_sysin>;
+
+ clock-output-names = "clk-s-d3-fs0-ch0",
+ "clk-s-d3-fs0-ch1",
+ "clk-s-d3-fs0-ch2",
+ "clk-s-d3-fs0-ch3";
+ };
+
+ clockgen-d3@9107000 {
+ compatible = "st,clkgen-c32";
+ reg = <0x9107000 0x1000>;
+
+ clk_s_d3_flexgen: clk-s-d3-flexgen {
+ #clock-cells = <1>;
+ compatible = "st,flexgen";
+
+ clocks = <&clk_s_d3_quadfs 0>,
+ <&clk_s_d3_quadfs 1>,
+ <&clk_s_d3_quadfs 2>,
+ <&clk_s_d3_quadfs 3>,
+ <&clk_sysin>;
+
+ clock-output-names = "clk-stfe-frc1",
+ "clk-tsout-0",
+ "clk-tsout-1",
+ "clk-mchi",
+ "clk-vsens-compo",
+ "clk-frc1-remote",
+ "clk-lpc-0",
+ "clk-lpc-1";
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/stih410.dtsi b/arch/arm/boot/dts/stih410.dtsi
new file mode 100644
index 0000000..c05627e
--- /dev/null
+++ b/arch/arm/boot/dts/stih410.dtsi
@@ -0,0 +1,14 @@
+/*
+ * Copyright (C) 2014 STMicroelectronics Limited.
+ * Author: Peter Griffin <peter.griffin@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+#include "stih410-clock.dtsi"
+#include "stih407-family.dtsi"
+#include "stih410-pinctrl.dtsi"
+/ {
+
+};
--
1.9.1
next prev parent reply other threads:[~2014-11-17 16:48 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-11-17 16:47 [PATCH v3 00/11] Add stih410 SoC/board and USB2/1.1 support for stih416 Peter Griffin
2014-11-17 16:47 ` [PATCH v3 02/11] ARM: STi: DT: STiH416: Add DT node for the stih415/6 usb2 phy Peter Griffin
2014-11-17 16:47 ` [PATCH v3 03/11] ARM: STi: DT: STiH416: Add DT nodes for the ehci and ohci usb controllers Peter Griffin
2014-11-17 16:47 ` [PATCH v3 05/11] ARM: multi_v7_defconfig: Enable stih415/6 usb2 phy driver Peter Griffin
[not found] ` <1416242884-5261-1-git-send-email-peter.griffin-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2014-11-17 16:47 ` [PATCH v3 01/11] ARM: STi: DT: STiH416: Add pinctl setup for usb controllers Peter Griffin
2014-11-17 16:47 ` [PATCH v3 04/11] ARM: multi_v7_defconfig: Enable st ohci and ehci HCD drivers Peter Griffin
2014-11-17 16:47 ` [PATCH v3 06/11] ARM: STi: DT: STiH410: Add defines for STiH410 DT clocks Peter Griffin
2014-11-17 16:48 ` [PATCH v3 11/11] ARM: STi: DT: STiH416: Change miphy356 node name to phy@fe382000 Peter Griffin
2014-11-18 8:47 ` [PATCH v3 00/11] Add stih410 SoC/board and USB2/1.1 support for stih416 Maxime Coquelin
[not found] ` <546B07BD.4030400-qxv4g6HH51o@public.gmane.org>
2014-11-18 8:53 ` Arnd Bergmann
2014-11-17 16:48 ` [PATCH v3 07/11] ARM: STi: DT: STiH410: Add pinctl config for usb controllers Peter Griffin
2014-11-17 16:48 ` [PATCH v3 08/11] ARM: STi: DT: STih407: Abstract common dt nodes into shared files Peter Griffin
2014-11-17 16:48 ` Peter Griffin [this message]
2014-11-17 16:48 ` [PATCH v3 10/11] ARM: STi: DT: STih407: STih410: Add clk_ignore_unused to kernel bootargs Peter Griffin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1416242884-5261-10-git-send-email-peter.griffin@linaro.org \
--to=peter.griffin@linaro.org \
--cc=arnd@arndb.de \
--cc=devicetree@vger.kernel.org \
--cc=lee.jones@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=maxime.coquelin@st.com \
--cc=patrice.chotard@st.com \
--cc=srinivas.kandagatla@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).