* [PATCH v2 1/2] of: Add vendor prefix for NovaTech LLC @ 2014-11-17 19:02 George McCollister 2014-11-17 19:02 ` [PATCH v2 2/2] ARM: dts: Add devicetree for NovaTech OrionLXm George McCollister 2014-11-17 19:10 ` [PATCH v2 1/2] of: Add vendor prefix for NovaTech LLC Felipe Balbi 0 siblings, 2 replies; 5+ messages in thread From: George McCollister @ 2014-11-17 19:02 UTC (permalink / raw) Cc: George McCollister, Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala, Jason Cooper, Mark Brown, Heiko Stuebner, Shawn Guo, Florian Vaussard, Andrew Lunn, Hayato Suzuki, open list:OPEN FIRMWARE AND..., open list For company details see: http://www.novatechweb.com Signed-off-by: George McCollister <george.mccollister-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> --- Documentation/devicetree/bindings/vendor-prefixes.txt | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index 723999d..8f1462e 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -105,6 +105,7 @@ netgear NETGEAR newhaven Newhaven Display International nintendo Nintendo nokia Nokia +novatech NovaTech LLC nvidia NVIDIA nxp NXP Semiconductors onnn ON Semiconductor Corp. -- 2.1.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH v2 2/2] ARM: dts: Add devicetree for NovaTech OrionLXm 2014-11-17 19:02 [PATCH v2 1/2] of: Add vendor prefix for NovaTech LLC George McCollister @ 2014-11-17 19:02 ` George McCollister 2014-11-17 19:09 ` Felipe Balbi 2014-11-17 19:10 ` [PATCH v2 1/2] of: Add vendor prefix for NovaTech LLC Felipe Balbi 1 sibling, 1 reply; 5+ messages in thread From: George McCollister @ 2014-11-17 19:02 UTC (permalink / raw) Cc: George McCollister, Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala, Russell King, Benoît Cousson, Tony Lindgren, Nishanth Menon, Florian Vaussard, Tomi Valkeinen, Joachim Eastwood, Felipe Balbi, Lokesh Vutla, Rajendra Nayak, Carlos Garcia, open list:OPEN FIRMWARE AND..., open list, moderated list:ARM PORT, open list:OMAP DEVICE TREE... This adds the NovaTech OrionLXm which is based on the AM335x SoC http://www.novatechweb.com/substation-automation/orionlxm/ RAM: 512MiB Flash: 4GB eMMC Ethernet PHYs: 2x Micrel KSZ8041FTLI USB ports are used internally by the expansion cards. Internal micro SD slot is available. Signed-off-by: George McCollister <george.mccollister@gmail.com> --- .../devicetree/bindings/arm/omap/omap.txt | 3 + arch/arm/boot/dts/Makefile | 3 +- arch/arm/boot/dts/am335x-lxm.dts | 362 +++++++++++++++++++++ 3 files changed, 367 insertions(+), 1 deletion(-) create mode 100644 arch/arm/boot/dts/am335x-lxm.dts diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt index ddd9bcd..4f6a82c 100644 --- a/Documentation/devicetree/bindings/arm/omap/omap.txt +++ b/Documentation/devicetree/bindings/arm/omap/omap.txt @@ -132,6 +132,9 @@ Boards: - AM335X Bone : Low cost community board compatible = "ti,am335x-bone", "ti,am33xx", "ti,omap3" +- AM335X OrionLXm : Substation Automation Platform + compatible = "novatech,am335x-lxm", "ti,am33xx" + - OMAP5 EVM : Evaluation Module compatible = "ti,omap5-evm", "ti,omap5" diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 38c89ca..454ee6c 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -331,7 +331,8 @@ dtb-$(CONFIG_SOC_AM33XX) += am335x-base0033.dtb \ am335x-evm.dtb \ am335x-evmsk.dtb \ am335x-nano.dtb \ - am335x-pepper.dtb + am335x-pepper.dtb \ + am335x-lxm.dtb dtb-$(CONFIG_ARCH_OMAP4) += omap4-duovero-parlor.dtb \ omap4-panda.dtb \ omap4-panda-a4.dtb \ diff --git a/arch/arm/boot/dts/am335x-lxm.dts b/arch/arm/boot/dts/am335x-lxm.dts new file mode 100644 index 0000000..7266a00 --- /dev/null +++ b/arch/arm/boot/dts/am335x-lxm.dts @@ -0,0 +1,362 @@ +/* + * Copyright (C) 2014 NovaTech LLC - http://www.novatechweb.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" + +/ { + model = "NovaTech OrionLXm"; + compatible = "novatech,am335x-lxm", "ti,am33xx"; + + cpus { + cpu@0 { + cpu0-supply = <&vdd1_reg>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x20000000>; /* 512 MB */ + }; + + /* Power supply provides a fixed 5V @2A */ + vbat: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "vbat"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + }; + + /* Power supply provides a fixed 3.3V @3A */ + vmmcsd_fixed: fixedregulator@1 { + compatible = "regulator-fixed"; + regulator-name = "vmmcsd_fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; +}; + +&am33xx_pinmux { + mmc1_pins: pinmux_mmc1_pins { + pinctrl-single,pins = < + 0xf0 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3 */ + 0xf4 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2 */ + 0xf8 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1 */ + 0xfc (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0 */ + 0x100 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk */ + 0x104 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd */ + >; + }; + + i2c0_pins: pinmux_i2c0_pins { + pinctrl-single,pins = < + 0x188 (PIN_INPUT | MUX_MODE0) /* i2c0_sda.i2c0_sda */ + 0x18c (PIN_INPUT | MUX_MODE0) /* i2c0_scl.i2c0_scl */ + >; + }; + + cpsw_default: cpsw_default { + pinctrl-single,pins = < + /* Slave 1 */ + 0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_int */ + 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* rmii1_crs_dv */ + 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* rmii1_rxer */ + 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* rmii1_txen */ + 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* rmii1_td1 */ + 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* rmii1_td0 */ + 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* rmii1_rd1 */ + 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* rmii1_rd0 */ + 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii1_refclk */ + + /* Slave 2 */ + 0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* rmii2_txen */ + 0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* rmii2_td1 */ + 0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* rmii2_td0 */ + 0x68 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* rmii2_rd1 */ + 0x6c (PIN_INPUT_PULLDOWN | MUX_MODE3) /* rmii2_rd0 */ + 0x70 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* rmii2_crs_dv */ + 0x74 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* rmii2_rxer */ + 0x78 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_int */ + 0x108 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* rmii2_refclk */ + >; + }; + + cpsw_sleep: cpsw_sleep { + pinctrl-single,pins = < + /* Slave 1 reset value */ + 0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_int */ + 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_crs_dv */ + 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_rxer */ + 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_txen */ + 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_td1 */ + 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_td0 */ + 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_rd1 */ + 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_rd0 */ + 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_refclk */ + + /* Slave 2 reset value*/ + 0x40 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_txen */ + 0x50 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_td1 */ + 0x54 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_td0 */ + 0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_rd1 */ + 0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_rd0 */ + 0x70 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_crs_dv */ + 0x74 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_rxer */ + 0x78 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_int */ + 0x108 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_refclk */ + >; + }; + + davinci_mdio_default: davinci_mdio_default { + pinctrl-single,pins = < + /* MDIO */ + 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ + 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + >; + }; + + davinci_mdio_sleep: davinci_mdio_sleep { + pinctrl-single,pins = < + /* MDIO reset value */ + 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + emmc_pins: pinmux_emmc_pins { + pinctrl-single,pins = < + 0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */ + 0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */ + 0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */ + 0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */ + 0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */ + 0x0c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */ + 0x10 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */ + 0x14 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */ + 0x18 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */ + 0x1c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */ + >; + }; + + uart0_pins: pinmux_uart0_pins { + pinctrl-single,pins = < + 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ + 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ + >; + }; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + + status = "okay"; + clock-frequency = <400000>; + + serial_config1: serial_config1@20 { + compatible = "nxp,pca9539"; + reg = <0x20>; + }; + + serial_config2: serial_config2@21 { + compatible = "nxp,pca9539"; + reg = <0x21>; + }; + + tps: tps@2d { + compatible = "ti,tps65910"; + reg = <0x2d>; + }; +}; + +/include/ "tps65910.dtsi" + +&tps { + vcc1-supply = <&vbat>; + vcc2-supply = <&vbat>; + vcc3-supply = <&vbat>; + vcc4-supply = <&vbat>; + vcc5-supply = <&vbat>; + vcc6-supply = <&vbat>; + vcc7-supply = <&vbat>; + vccio-supply = <&vbat>; + + regulators { + /* vrtc - unused */ + + vio_reg: regulator@1 { + regulator-name = "vio_1v5,ddr"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + regulator-always-on; + }; + + vdd1_reg: regulator@2 { + regulator-name = "vdd1,mpu"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + regulator-always-on; + }; + + vdd2_reg: regulator@3 { + regulator-name = "vdd2_1v1,core"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-boot-on; + regulator-always-on; + }; + + /* vdd3 - unused */ + + /* vdig1 - unused */ + + vdig2_reg: regulator@6 { + regulator-name = "vdig2_1v8,vdds_pll"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + /* vpll - unused */ + + vdac_reg: regulator@8 { + regulator-name = "vdac_1v8,vdds"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + vaux1_reg: regulator@9 { + regulator-name = "vaux1_1v8,usb"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + vaux2_reg: regulator@10 { + regulator-name = "vaux2_3v3,io"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + vaux33_reg: regulator@11 { + regulator-name = "vaux33_3v3,usb"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + vmmc_reg: regulator@12 { + regulator-name = "vmmc_3v3,io"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + }; +}; + +&sham { + status = "okay"; +}; + +&aes { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + + status = "okay"; +}; + +&usb { + status = "okay"; +}; + +&usb_ctrl_mod { + status = "okay"; +}; + +&usb0_phy { + status = "okay"; +}; + +&usb1_phy { + status = "okay"; +}; + +&usb0 { + status = "okay"; + dr_mode = "host"; +}; + +&usb1 { + status = "okay"; + dr_mode = "host"; +}; + +&cppi41dma { + status = "okay"; +}; + +&cpsw_emac0 { + phy_id = <&davinci_mdio>, <5>; + phy-mode = "rmii"; + dual_emac_res_vlan = <2>; +}; + +&cpsw_emac1 { + phy_id = <&davinci_mdio>, <4>; + phy-mode = "rmii"; + dual_emac_res_vlan = <3>; +}; + +&mac { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cpsw_default>; + pinctrl-1 = <&cpsw_sleep>; + dual_emac = <1>; + status = "okay"; +}; + +&davinci_mdio { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&davinci_mdio_default>; + pinctrl-1 = <&davinci_mdio_sleep>; + status = "okay"; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + vmmc-supply = <&vmmcsd_fixed>; + bus-width = <4>; + status = "okay"; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&emmc_pins>; + vmmc-supply = <&vmmcsd_fixed>; + bus-width = <8>; + ti,non-removable; + status = "okay"; +}; + -- 2.1.0 ^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH v2 2/2] ARM: dts: Add devicetree for NovaTech OrionLXm 2014-11-17 19:02 ` [PATCH v2 2/2] ARM: dts: Add devicetree for NovaTech OrionLXm George McCollister @ 2014-11-17 19:09 ` Felipe Balbi 2014-11-21 23:33 ` Tony Lindgren 0 siblings, 1 reply; 5+ messages in thread From: Felipe Balbi @ 2014-11-17 19:09 UTC (permalink / raw) To: George McCollister Cc: Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala, Russell King, Benoît Cousson, Tony Lindgren, Nishanth Menon, Florian Vaussard, Tomi Valkeinen, Joachim Eastwood, Felipe Balbi, Lokesh Vutla, Carlos Garcia, open list:OPEN FIRMWARE AND..., open list, moderated list:ARM PORT, open list:OMAP DEVICE TREE... [-- Attachment #1: Type: text/plain, Size: 12607 bytes --] On Mon, Nov 17, 2014 at 01:02:35PM -0600, George McCollister wrote: > This adds the NovaTech OrionLXm which is based on the AM335x SoC > http://www.novatechweb.com/substation-automation/orionlxm/ > > RAM: 512MiB > Flash: 4GB eMMC > Ethernet PHYs: 2x Micrel KSZ8041FTLI > USB ports are used internally by the expansion cards. > Internal micro SD slot is available. > > Signed-off-by: George McCollister <george.mccollister@gmail.com> this looks might better to my eyes: Reviewed-by: Felipe Balbi <balbi@ti.com> > --- > .../devicetree/bindings/arm/omap/omap.txt | 3 + > arch/arm/boot/dts/Makefile | 3 +- > arch/arm/boot/dts/am335x-lxm.dts | 362 +++++++++++++++++++++ > 3 files changed, 367 insertions(+), 1 deletion(-) > create mode 100644 arch/arm/boot/dts/am335x-lxm.dts > > diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt > index ddd9bcd..4f6a82c 100644 > --- a/Documentation/devicetree/bindings/arm/omap/omap.txt > +++ b/Documentation/devicetree/bindings/arm/omap/omap.txt > @@ -132,6 +132,9 @@ Boards: > - AM335X Bone : Low cost community board > compatible = "ti,am335x-bone", "ti,am33xx", "ti,omap3" > > +- AM335X OrionLXm : Substation Automation Platform > + compatible = "novatech,am335x-lxm", "ti,am33xx" > + > - OMAP5 EVM : Evaluation Module > compatible = "ti,omap5-evm", "ti,omap5" > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > index 38c89ca..454ee6c 100644 > --- a/arch/arm/boot/dts/Makefile > +++ b/arch/arm/boot/dts/Makefile > @@ -331,7 +331,8 @@ dtb-$(CONFIG_SOC_AM33XX) += am335x-base0033.dtb \ > am335x-evm.dtb \ > am335x-evmsk.dtb \ > am335x-nano.dtb \ > - am335x-pepper.dtb > + am335x-pepper.dtb \ > + am335x-lxm.dtb > dtb-$(CONFIG_ARCH_OMAP4) += omap4-duovero-parlor.dtb \ > omap4-panda.dtb \ > omap4-panda-a4.dtb \ > diff --git a/arch/arm/boot/dts/am335x-lxm.dts b/arch/arm/boot/dts/am335x-lxm.dts > new file mode 100644 > index 0000000..7266a00 > --- /dev/null > +++ b/arch/arm/boot/dts/am335x-lxm.dts > @@ -0,0 +1,362 @@ > +/* > + * Copyright (C) 2014 NovaTech LLC - http://www.novatechweb.com > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + */ > +/dts-v1/; > + > +#include "am33xx.dtsi" > + > +/ { > + model = "NovaTech OrionLXm"; > + compatible = "novatech,am335x-lxm", "ti,am33xx"; > + > + cpus { > + cpu@0 { > + cpu0-supply = <&vdd1_reg>; > + }; > + }; > + > + memory { > + device_type = "memory"; > + reg = <0x80000000 0x20000000>; /* 512 MB */ > + }; > + > + /* Power supply provides a fixed 5V @2A */ > + vbat: fixedregulator@0 { > + compatible = "regulator-fixed"; > + regulator-name = "vbat"; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + regulator-boot-on; > + }; > + > + /* Power supply provides a fixed 3.3V @3A */ > + vmmcsd_fixed: fixedregulator@1 { > + compatible = "regulator-fixed"; > + regulator-name = "vmmcsd_fixed"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-boot-on; > + }; > +}; > + > +&am33xx_pinmux { > + mmc1_pins: pinmux_mmc1_pins { > + pinctrl-single,pins = < > + 0xf0 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3 */ > + 0xf4 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2 */ > + 0xf8 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1 */ > + 0xfc (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0 */ > + 0x100 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk */ > + 0x104 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd */ > + >; > + }; > + > + i2c0_pins: pinmux_i2c0_pins { > + pinctrl-single,pins = < > + 0x188 (PIN_INPUT | MUX_MODE0) /* i2c0_sda.i2c0_sda */ > + 0x18c (PIN_INPUT | MUX_MODE0) /* i2c0_scl.i2c0_scl */ > + >; > + }; > + > + cpsw_default: cpsw_default { > + pinctrl-single,pins = < > + /* Slave 1 */ > + 0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_int */ > + 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* rmii1_crs_dv */ > + 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* rmii1_rxer */ > + 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* rmii1_txen */ > + 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* rmii1_td1 */ > + 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* rmii1_td0 */ > + 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* rmii1_rd1 */ > + 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* rmii1_rd0 */ > + 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii1_refclk */ > + > + /* Slave 2 */ > + 0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* rmii2_txen */ > + 0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* rmii2_td1 */ > + 0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* rmii2_td0 */ > + 0x68 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* rmii2_rd1 */ > + 0x6c (PIN_INPUT_PULLDOWN | MUX_MODE3) /* rmii2_rd0 */ > + 0x70 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* rmii2_crs_dv */ > + 0x74 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* rmii2_rxer */ > + 0x78 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_int */ > + 0x108 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* rmii2_refclk */ > + >; > + }; > + > + cpsw_sleep: cpsw_sleep { > + pinctrl-single,pins = < > + /* Slave 1 reset value */ > + 0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_int */ > + 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_crs_dv */ > + 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_rxer */ > + 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_txen */ > + 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_td1 */ > + 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_td0 */ > + 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_rd1 */ > + 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_rd0 */ > + 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_refclk */ > + > + /* Slave 2 reset value*/ > + 0x40 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_txen */ > + 0x50 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_td1 */ > + 0x54 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_td0 */ > + 0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_rd1 */ > + 0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_rd0 */ > + 0x70 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_crs_dv */ > + 0x74 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_rxer */ > + 0x78 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_int */ > + 0x108 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_refclk */ > + >; > + }; > + > + davinci_mdio_default: davinci_mdio_default { > + pinctrl-single,pins = < > + /* MDIO */ > + 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ > + 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ > + >; > + }; > + > + davinci_mdio_sleep: davinci_mdio_sleep { > + pinctrl-single,pins = < > + /* MDIO reset value */ > + 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7) > + 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7) > + >; > + }; > + > + emmc_pins: pinmux_emmc_pins { > + pinctrl-single,pins = < > + 0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */ > + 0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */ > + 0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */ > + 0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */ > + 0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */ > + 0x0c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */ > + 0x10 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */ > + 0x14 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */ > + 0x18 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */ > + 0x1c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */ > + >; > + }; > + > + uart0_pins: pinmux_uart0_pins { > + pinctrl-single,pins = < > + 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ > + 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ > + >; > + }; > +}; > + > +&i2c0 { > + pinctrl-names = "default"; > + pinctrl-0 = <&i2c0_pins>; > + > + status = "okay"; > + clock-frequency = <400000>; > + > + serial_config1: serial_config1@20 { > + compatible = "nxp,pca9539"; > + reg = <0x20>; > + }; > + > + serial_config2: serial_config2@21 { > + compatible = "nxp,pca9539"; > + reg = <0x21>; > + }; > + > + tps: tps@2d { > + compatible = "ti,tps65910"; > + reg = <0x2d>; > + }; > +}; > + > +/include/ "tps65910.dtsi" > + > +&tps { > + vcc1-supply = <&vbat>; > + vcc2-supply = <&vbat>; > + vcc3-supply = <&vbat>; > + vcc4-supply = <&vbat>; > + vcc5-supply = <&vbat>; > + vcc6-supply = <&vbat>; > + vcc7-supply = <&vbat>; > + vccio-supply = <&vbat>; > + > + regulators { > + /* vrtc - unused */ > + > + vio_reg: regulator@1 { > + regulator-name = "vio_1v5,ddr"; > + regulator-min-microvolt = <1500000>; > + regulator-max-microvolt = <1500000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + vdd1_reg: regulator@2 { > + regulator-name = "vdd1,mpu"; > + regulator-min-microvolt = <600000>; > + regulator-max-microvolt = <1500000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + vdd2_reg: regulator@3 { > + regulator-name = "vdd2_1v1,core"; > + regulator-min-microvolt = <1100000>; > + regulator-max-microvolt = <1100000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + /* vdd3 - unused */ > + > + /* vdig1 - unused */ > + > + vdig2_reg: regulator@6 { > + regulator-name = "vdig2_1v8,vdds_pll"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + /* vpll - unused */ > + > + vdac_reg: regulator@8 { > + regulator-name = "vdac_1v8,vdds"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + vaux1_reg: regulator@9 { > + regulator-name = "vaux1_1v8,usb"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + vaux2_reg: regulator@10 { > + regulator-name = "vaux2_3v3,io"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + vaux33_reg: regulator@11 { > + regulator-name = "vaux33_3v3,usb"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + vmmc_reg: regulator@12 { > + regulator-name = "vmmc_3v3,io"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + }; > +}; > + > +&sham { > + status = "okay"; > +}; > + > +&aes { > + status = "okay"; > +}; > + > +&uart0 { > + pinctrl-names = "default"; > + pinctrl-0 = <&uart0_pins>; > + > + status = "okay"; > +}; > + > +&usb { > + status = "okay"; > +}; > + > +&usb_ctrl_mod { > + status = "okay"; > +}; > + > +&usb0_phy { > + status = "okay"; > +}; > + > +&usb1_phy { > + status = "okay"; > +}; > + > +&usb0 { > + status = "okay"; > + dr_mode = "host"; > +}; > + > +&usb1 { > + status = "okay"; > + dr_mode = "host"; > +}; > + > +&cppi41dma { > + status = "okay"; > +}; > + > +&cpsw_emac0 { > + phy_id = <&davinci_mdio>, <5>; > + phy-mode = "rmii"; > + dual_emac_res_vlan = <2>; > +}; > + > +&cpsw_emac1 { > + phy_id = <&davinci_mdio>, <4>; > + phy-mode = "rmii"; > + dual_emac_res_vlan = <3>; > +}; > + > +&mac { > + pinctrl-names = "default", "sleep"; > + pinctrl-0 = <&cpsw_default>; > + pinctrl-1 = <&cpsw_sleep>; > + dual_emac = <1>; > + status = "okay"; > +}; > + > +&davinci_mdio { > + pinctrl-names = "default", "sleep"; > + pinctrl-0 = <&davinci_mdio_default>; > + pinctrl-1 = <&davinci_mdio_sleep>; > + status = "okay"; > +}; > + > +&mmc1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&mmc1_pins>; > + vmmc-supply = <&vmmcsd_fixed>; > + bus-width = <4>; > + status = "okay"; > +}; > + > +&mmc2 { > + pinctrl-names = "default"; > + pinctrl-0 = <&emmc_pins>; > + vmmc-supply = <&vmmcsd_fixed>; > + bus-width = <8>; > + ti,non-removable; > + status = "okay"; > +}; > + > -- > 2.1.0 > -- balbi [-- Attachment #2: Digital signature --] [-- Type: application/pgp-signature, Size: 819 bytes --] ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH v2 2/2] ARM: dts: Add devicetree for NovaTech OrionLXm 2014-11-17 19:09 ` Felipe Balbi @ 2014-11-21 23:33 ` Tony Lindgren 0 siblings, 0 replies; 5+ messages in thread From: Tony Lindgren @ 2014-11-21 23:33 UTC (permalink / raw) To: Felipe Balbi Cc: George McCollister, Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala, Russell King, Benoît Cousson, Nishanth Menon, Florian Vaussard, Tomi Valkeinen, Joachim Eastwood, Lokesh Vutla, Carlos Garcia, open list:OPEN FIRMWARE AND..., open list, moderated list:ARM PORT, open list:OMAP DEVICE TREE... * Felipe Balbi <balbi-l0cyMroinI0@public.gmane.org> [141117 11:10]: > On Mon, Nov 17, 2014 at 01:02:35PM -0600, George McCollister wrote: > > This adds the NovaTech OrionLXm which is based on the AM335x SoC > > http://www.novatechweb.com/substation-automation/orionlxm/ > > > > RAM: 512MiB > > Flash: 4GB eMMC > > Ethernet PHYs: 2x Micrel KSZ8041FTLI > > USB ports are used internally by the expansion cards. > > Internal micro SD slot is available. > > > > Signed-off-by: George McCollister <george.mccollister-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> > > this looks might better to my eyes: > > Reviewed-by: Felipe Balbi <balbi-l0cyMroinI0@public.gmane.org> Applying into omap-for-v3.19/dt-v2 thanks. Tony -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH v2 1/2] of: Add vendor prefix for NovaTech LLC 2014-11-17 19:02 [PATCH v2 1/2] of: Add vendor prefix for NovaTech LLC George McCollister 2014-11-17 19:02 ` [PATCH v2 2/2] ARM: dts: Add devicetree for NovaTech OrionLXm George McCollister @ 2014-11-17 19:10 ` Felipe Balbi 1 sibling, 0 replies; 5+ messages in thread From: Felipe Balbi @ 2014-11-17 19:10 UTC (permalink / raw) To: George McCollister Cc: Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala, Jason Cooper, Mark Brown, Heiko Stuebner, Shawn Guo, Florian Vaussard, Andrew Lunn, Hayato Suzuki, open list:OPEN FIRMWARE AND..., open list [-- Attachment #1: Type: text/plain, Size: 1158 bytes --] On Mon, Nov 17, 2014 at 01:02:34PM -0600, George McCollister wrote: > For company details see: > http://www.novatechweb.com > > Signed-off-by: George McCollister <george.mccollister@gmail.com> Reviewed-by: Felipe Balbi <balbi@ti.com> > --- > Documentation/devicetree/bindings/vendor-prefixes.txt | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt > index 723999d..8f1462e 100644 > --- a/Documentation/devicetree/bindings/vendor-prefixes.txt > +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt > @@ -105,6 +105,7 @@ netgear NETGEAR > newhaven Newhaven Display International > nintendo Nintendo > nokia Nokia > +novatech NovaTech LLC > nvidia NVIDIA > nxp NXP Semiconductors > onnn ON Semiconductor Corp. > -- > 2.1.0 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ -- balbi [-- Attachment #2: Digital signature --] [-- Type: application/pgp-signature, Size: 819 bytes --] ^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2014-11-21 23:33 UTC | newest] Thread overview: 5+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2014-11-17 19:02 [PATCH v2 1/2] of: Add vendor prefix for NovaTech LLC George McCollister 2014-11-17 19:02 ` [PATCH v2 2/2] ARM: dts: Add devicetree for NovaTech OrionLXm George McCollister 2014-11-17 19:09 ` Felipe Balbi 2014-11-21 23:33 ` Tony Lindgren 2014-11-17 19:10 ` [PATCH v2 1/2] of: Add vendor prefix for NovaTech LLC Felipe Balbi
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).