From mboxrd@z Thu Jan 1 00:00:00 1970 From: Chanwoo Choi Subject: [PATCHv2 5/5] mfd: s2mps11: Add binding documentation for Samsung S2MPS13 PMIC Date: Tue, 18 Nov 2014 17:59:43 +0900 Message-ID: <1416301183-10478-6-git-send-email-cw00.choi@samsung.com> References: <1416301183-10478-1-git-send-email-cw00.choi@samsung.com> Return-path: In-reply-to: <1416301183-10478-1-git-send-email-cw00.choi@samsung.com> Sender: linux-kernel-owner@vger.kernel.org To: lee.jones@linaro.org, broonie@kernel.org, mturquette@linaro.org, a.zummo@towertech.it Cc: lgirdwood@gmail.com, sbkim73@samsung.com, sameo@linux.intel.com, geunsik.lim@samsung.com, inki.dae@samsung.com, kyungmin.park@samsung.com, k.kozlowski@samsung.com, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, Chanwoo Choi List-Id: devicetree@vger.kernel.org This patch adds the binding documentation for Samsung S2MPS13 PMIC which is similiar with existing S2MPS14 PMIC. S2MPS13 has the different number of regulators from S2MPS14 and RTC/Clock is the same with the S2MPS14. Cc: Lee Jones Signed-off-by: Chanwoo Choi Acked-by: Sangbeom Kim Acked-by: Lee Jones Reviewed-by: Krzysztof Kozlowski --- Documentation/devicetree/bindings/mfd/s2mps11.txt | 22 ++++++++++++---------- 1 file changed, 12 insertions(+), 10 deletions(-) diff --git a/Documentation/devicetree/bindings/mfd/s2mps11.txt b/Documentation/devicetree/bindings/mfd/s2mps11.txt index 0e4026a..57a0450 100644 --- a/Documentation/devicetree/bindings/mfd/s2mps11.txt +++ b/Documentation/devicetree/bindings/mfd/s2mps11.txt @@ -1,5 +1,5 @@ -* Samsung S2MPS11, S2MPS14 and S2MPU02 Voltage and Current Regulator +* Samsung S2MPS11, S2MPS13, S2MPS14 and S2MPU02 Voltage and Current Regulator The Samsung S2MPS11 is a multi-function device which includes voltage and current regulators, RTC, charger controller and other sub-blocks. It is @@ -7,8 +7,8 @@ interfaced to the host controller using an I2C interface. Each sub-block is addressed by the host system using different I2C slave addresses. Required properties: -- compatible: Should be "samsung,s2mps11-pmic" or "samsung,s2mps14-pmic" - or "samsung,s2mpu02-pmic". +- compatible: Should be "samsung,s2mps11-pmic" or "samsung,s2mps13-pmic" + or "samsung,s2mps14-pmic" or "samsung,s2mpu02-pmic". - reg: Specifies the I2C slave address of the pmic block. It should be 0x66. Optional properties: @@ -17,8 +17,8 @@ Optional properties: - interrupts: Interrupt specifiers for interrupt sources. Optional nodes: -- clocks: s2mps11 and s5m8767 provide three(AP/CP/BT) buffered 32.768 KHz - outputs, so to register these as clocks with common clock framework +- clocks: s2mps11, s2mps13 and s5m8767 provide three(AP/CP/BT) buffered 32.768 + KHz outputs, so to register these as clocks with common clock framework instantiate a sub-node named "clocks". It uses the common clock binding documented in : [Documentation/devicetree/bindings/clock/clock-bindings.txt] @@ -30,12 +30,12 @@ Optional nodes: the clock which they consume. Clock ID Devices ---------------------------------------------------------- - 32KhzAP 0 S2MPS11, S2MPS14, S5M8767 - 32KhzCP 1 S2MPS11, S5M8767 - 32KhzBT 2 S2MPS11, S2MPS14, S5M8767 + 32KhzAP 0 S2MPS11, S2MPS13, S2MPS14, S5M8767 + 32KhzCP 1 S2MPS11, S2MPS13, S5M8767 + 32KhzBT 2 S2MPS11, S2MPS13, S2MPS14, S5M8767 - - compatible: Should be one of: "samsung,s2mps11-clk", "samsung,s2mps14-clk", - "samsung,s5m8767-clk" + - compatible: Should be one of: "samsung,s2mps11-clk", "samsung,s2mps13-clk", + "samsung,s2mps14-clk", "samsung,s5m8767-clk" - regulators: The regulators of s2mps11 that have to be instantiated should be included in a sub-node named 'regulators'. Regulator nodes included in this @@ -81,12 +81,14 @@ as per the datasheet of s2mps11. - LDOn - valid values for n are: - S2MPS11: 1 to 38 + - S2MPS13: 1 to 40 - S2MPS14: 1 to 25 - S2MPU02: 1 to 28 - Example: LDO1, LDO2, LDO28 - BUCKn - valid values for n are: - S2MPS11: 1 to 10 + - S2MPS13: 1 to 10 - S2MPS14: 1 to 5 - S2MPU02: 1 to 7 - Example: BUCK1, BUCK2, BUCK9 -- 1.8.5.5