From: Lucas Stach <l.stach@pengutronix.de>
To: Thierry Reding <thierry.reding@gmail.com>
Cc: devicetree@vger.kernel.org, Rob Herring <robh+dt@kernel.org>,
kernel@pengutronix.de, dri-devel@lists.freedesktop.org
Subject: [PATCH 2/2] drm/panel: Add support for Giantplus GPG482739QS5 panel
Date: Wed, 19 Nov 2014 10:29:55 +0100 [thread overview]
Message-ID: <1416389395-15152-2-git-send-email-l.stach@pengutronix.de> (raw)
In-Reply-To: <1416389395-15152-1-git-send-email-l.stach@pengutronix.de>
From: Philipp Zabel <philipp.zabel@gmail.com>
This patch adds support for the GiantPlus GPG48273QS5 4.3" WQVGA TFT LCD panel
to the simple-panel driver.
This panel is connected via a parallel bus and uses both HSYNC and VSYNC,
whose lengths are unfortunately not clearly defined. The datasheet only
specifies the front- and backporch length, but the timing diagram suggests
that both sync signals should be asserted for exactly one clock cycle.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
---
[lst]: rebased on top of drm/panel/for-next + added commit message
---
.../bindings/panel/giantplus,gpg482739qs5.txt | 7 ++++++
drivers/gpu/drm/panel/panel-simple.c | 26 ++++++++++++++++++++++
2 files changed, 33 insertions(+)
create mode 100644 Documentation/devicetree/bindings/panel/giantplus,gpg482739qs5.txt
diff --git a/Documentation/devicetree/bindings/panel/giantplus,gpg482739qs5.txt b/Documentation/devicetree/bindings/panel/giantplus,gpg482739qs5.txt
new file mode 100644
index 000000000000..24b0b624434b
--- /dev/null
+++ b/Documentation/devicetree/bindings/panel/giantplus,gpg482739qs5.txt
@@ -0,0 +1,7 @@
+GiantPlus GPG48273QS5 4.3" (480x272) WQVGA TFT LCD panel
+
+Required properties:
+- compatible: should be "giantplus,gpg48273qs5"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index c4b6167a8bf3..1d8ed2062841 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -560,6 +560,29 @@ static const struct panel_desc foxlink_fl500wvr00_a0t = {
},
};
+static const struct drm_display_mode giantplus_gpg482739qs5_mode = {
+ .clock = 9000,
+ .hdisplay = 480,
+ .hsync_start = 480 + 5,
+ .hsync_end = 480 + 5 + 1,
+ .htotal = 480 + 5 + 1 + 40,
+ .vdisplay = 272,
+ .vsync_start = 272 + 8,
+ .vsync_end = 272 + 8 + 1,
+ .vtotal = 272 + 8 + 1 + 8,
+ .vrefresh = 60,
+};
+
+static const struct panel_desc giantplus_gpg482739qs5 = {
+ .modes = &giantplus_gpg482739qs5_mode,
+ .num_modes = 1,
+ .bpc = 8,
+ .size = {
+ .width = 95,
+ .height = 54,
+ },
+};
+
static const struct drm_display_mode hannstar_hsd070pww1_mode = {
.clock = 71100,
.hdisplay = 1280,
@@ -757,6 +780,9 @@ static const struct of_device_id platform_of_match[] = {
.compatible = "foxlink,fl500wvr00-a0t",
.data = &foxlink_fl500wvr00_a0t,
}, {
+ .compatible = "giantplus,gpg482739qs5",
+ .data = &giantplus_gpg482739qs5
+ }, {
.compatible = "hannstar,hsd070pww1",
.data = &hannstar_hsd070pww1,
}, {
--
2.1.1
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2014-11-19 9:29 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-11-19 9:29 [PATCH 1/2] of: Add vendor prefix for Giantplus Technology Co., Ltd Lucas Stach
2014-11-19 9:29 ` Lucas Stach [this message]
2014-12-01 11:07 ` [PATCH 2/2] drm/panel: Add support for Giantplus GPG482739QS5 panel Lucas Stach
2014-12-04 13:16 ` Thierry Reding
[not found] ` <1416389395-15152-1-git-send-email-l.stach-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2014-11-19 14:50 ` [PATCH 1/2] of: Add vendor prefix for Giantplus Technology Co., Ltd Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1416389395-15152-2-git-send-email-l.stach@pengutronix.de \
--to=l.stach@pengutronix.de \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=kernel@pengutronix.de \
--cc=robh+dt@kernel.org \
--cc=thierry.reding@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).