From: Yingjoe Chen <yingjoe.chen@mediatek.com>
To: Thomas Gleixner <tglx@linutronix.de>,
Jiang Liu <jiang.liu@linux.intel.com>,
Marc Zyngier <marc.zyngier@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>,
Boris BREZILLON <boris.brezillon@free-electrons.com>,
Russell King <linux@arm.linux.org.uk>,
Jason Cooper <jason@lakedaemon.net>,
Pawel Moll <pawel.moll@arm.com>,
devicetree@vger.kernel.org, hc.yen@mediatek.com,
srv_heupstream@mediatek.com, yh.chen@mediatek.com,
linux-kernel@vger.kernel.org,
Grant Likely <grant.likely@linaro.org>,
Yijing Wang <wangyijing@huawei.com>,
Rob Herring <robh+dt@kernel.org>,
nathan.chung@mediatek.com, yingjoe.chen@gmail.com,
Matthias Brugger <matthias.bgg@gmail.com>,
Yingjoe Chen <yingjoe.chen@mediatek.com>,
eddie.huang@mediatek.com, Bjorn Helgaas <bhelgaas@google.com>,
Sascha Hauer <kernel@pengutronix.de>,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v7 2/4] ARM: mediatek: Add sysirq interrupt polarity support
Date: Wed, 19 Nov 2014 22:14:09 +0800 [thread overview]
Message-ID: <1416406451-4578-3-git-send-email-yingjoe.chen@mediatek.com> (raw)
In-Reply-To: <1416406451-4578-1-git-send-email-yingjoe.chen@mediatek.com>
Mediatek SoCs have interrupt polarity support in sysirq which
allows to invert polarity for given interrupt. Add this support
using hierarchy irq domain.
Signed-off-by: Yingjoe Chen <yingjoe.chen@mediatek.com>
---
drivers/irqchip/Makefile | 1 +
drivers/irqchip/irq-mtk-sysirq.c | 158 +++++++++++++++++++++++++++++++++++++++
2 files changed, 159 insertions(+)
create mode 100644 drivers/irqchip/irq-mtk-sysirq.c
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index 173bb5f..4e0f254 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -38,3 +38,4 @@ obj-$(CONFIG_IRQ_CROSSBAR) += irq-crossbar.o
obj-$(CONFIG_BRCMSTB_L2_IRQ) += irq-brcmstb-l2.o \
irq-bcm7120-l2.o
obj-$(CONFIG_KEYSTONE_IRQ) += irq-keystone.o
+obj-$(CONFIG_ARCH_MEDIATEK) += irq-mtk-sysirq.o
diff --git a/drivers/irqchip/irq-mtk-sysirq.c b/drivers/irqchip/irq-mtk-sysirq.c
new file mode 100644
index 0000000..93cb945
--- /dev/null
+++ b/drivers/irqchip/irq-mtk-sysirq.c
@@ -0,0 +1,158 @@
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: Joe.C <yingjoe.chen@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/of_address.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+
+#include "irqchip.h"
+
+#define MT6577_SYS_INTPOL_NUM (224)
+
+struct mtk_sysirq_chip_data {
+ spinlock_t lock;
+ void __iomem *intpol_base;
+};
+
+static int mtk_sysirq_set_type(struct irq_data *data, unsigned int type)
+{
+ irq_hw_number_t hwirq = data->hwirq;
+ struct mtk_sysirq_chip_data *chip_data = data->chip_data;
+ u32 offset, reg_index, value;
+ unsigned long flags;
+ int ret;
+
+ offset = hwirq & 0x1f;
+ reg_index = hwirq >> 5;
+
+ spin_lock_irqsave(&chip_data->lock, flags);
+ value = readl_relaxed(chip_data->intpol_base + reg_index * 4);
+ if (type == IRQ_TYPE_LEVEL_LOW || type == IRQ_TYPE_EDGE_FALLING) {
+ if (type == IRQ_TYPE_LEVEL_LOW)
+ type = IRQ_TYPE_LEVEL_HIGH;
+ else
+ type = IRQ_TYPE_EDGE_RISING;
+ value |= (1 << offset);
+ } else
+ value &= ~(1 << offset);
+ writel(value, chip_data->intpol_base + reg_index * 4);
+
+ data = data->parent_data;
+ ret = data->chip->irq_set_type(data, type);
+ spin_unlock_irqrestore(&chip_data->lock, flags);
+ return ret;
+}
+
+static struct irq_chip mtk_sysirq_chip = {
+ .name = "MT_SYSIRQ",
+ .irq_mask = irq_chip_mask_parent,
+ .irq_unmask = irq_chip_unmask_parent,
+ .irq_eoi = irq_chip_eoi_parent,
+ .irq_set_type = mtk_sysirq_set_type,
+ .irq_retrigger = irq_chip_retrigger_hierarchy,
+ .irq_set_affinity = irq_chip_set_affinity_parent,
+};
+
+static int mtk_sysirq_domain_xlate(struct irq_domain *d,
+ struct device_node *controller,
+ const u32 *intspec, unsigned int intsize,
+ unsigned long *out_hwirq,
+ unsigned int *out_type)
+{
+ if (intsize < 3)
+ return -EINVAL;
+
+ /* sysirq doesn't support PPI */
+ if (intspec[0])
+ return -EINVAL;
+
+ *out_hwirq = intspec[1];
+ *out_type = intspec[2] & IRQ_TYPE_SENSE_MASK;
+ return 0;
+}
+
+static int mtk_sysirq_domain_alloc(struct irq_domain *domain, unsigned int virq,
+ unsigned int nr_irqs, void *arg)
+{
+ int i;
+ irq_hw_number_t hwirq;
+ struct of_phandle_args *irq_data = arg;
+ struct of_phandle_args gic_data = *irq_data;
+
+ if (irq_data->args_count < 3)
+ return -EINVAL;
+
+ hwirq = irq_data->args[1];
+ for (i = 0; i < nr_irqs; i++)
+ irq_domain_set_hwirq_and_chip(domain, virq + i, hwirq + i,
+ &mtk_sysirq_chip,
+ domain->host_data);
+
+ gic_data.np = domain->parent->of_node;
+ return irq_domain_alloc_irqs_parent(domain, virq, nr_irqs, &gic_data);
+}
+
+static struct irq_domain_ops sysirq_domain_ops = {
+ .xlate = mtk_sysirq_domain_xlate,
+ .alloc = mtk_sysirq_domain_alloc,
+ .free = irq_domain_free_irqs_common,
+};
+
+static int __init mtk_sysirq_of_init(struct device_node *node,
+ struct device_node *parent)
+{
+ struct irq_domain *domain, *domain_parent;
+ struct mtk_sysirq_chip_data *chip_data;
+ int ret = 0;
+
+ domain_parent = irq_find_host(parent);
+ if (!domain_parent) {
+ pr_err("mtk_sysirq: interrupt-parent not found\n");
+ return -EINVAL;
+ }
+
+ chip_data = kzalloc(sizeof(*chip_data), GFP_KERNEL);
+ if (!chip_data)
+ return -ENOMEM;
+
+ chip_data->intpol_base = of_io_request_and_map(node, 0, "intpol");
+ if (!chip_data->intpol_base) {
+ pr_err("mtk_sysirq: unable to map sysirq register\n");
+ ret = -ENOMEM;
+ goto out_free;
+ }
+
+ domain = irq_domain_add_hierarchy(domain_parent, 0,
+ MT6577_SYS_INTPOL_NUM, node,
+ &sysirq_domain_ops, chip_data);
+ if (!domain) {
+ ret = -ENOMEM;
+ goto out_unmap;
+ }
+ spin_lock_init(&chip_data->lock);
+
+ return 0;
+
+out_unmap:
+ iounmap(chip_data->intpol_base);
+out_free:
+ kfree(chip_data);
+ return ret;
+}
+IRQCHIP_DECLARE(mtk_sysirq, "mediatek,mt6577-sysirq", mtk_sysirq_of_init);
--
1.8.1.1.dirty
next prev parent reply other threads:[~2014-11-19 14:14 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-11-19 14:14 [PATCH v7 0/4] ARM: mediatek: Add support for interrupt polarity Yingjoe Chen
2014-11-19 14:14 ` [PATCH v7 1/4] irqchip: gic: Support hierarchy irq domain Yingjoe Chen
2014-11-19 17:18 ` Marc Zyngier
[not found] ` <87h9xvaz2p.fsf-BgpFEFc6EmV6Fr0h90IsVGS4ubULX0JqMm0uRHvK7Nw@public.gmane.org>
2014-11-20 3:57 ` Yingjoe Chen
2014-11-20 9:41 ` Yingjoe Chen
2014-11-20 10:29 ` Marc Zyngier
2014-11-20 4:26 ` Jiang Liu
[not found] ` <546D6D62.4030005-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
2014-11-20 10:07 ` Marc Zyngier
[not found] ` <87wq6q9odi.fsf-BgpFEFc6EmV6Fr0h90IsVGS4ubULX0JqMm0uRHvK7Nw@public.gmane.org>
2014-11-21 15:51 ` Yingjoe Chen
2014-11-24 19:31 ` Marc Zyngier
2014-11-19 14:14 ` Yingjoe Chen [this message]
[not found] ` <1416406451-4578-3-git-send-email-yingjoe.chen-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
2014-11-19 18:04 ` [PATCH v7 2/4] ARM: mediatek: Add sysirq interrupt polarity support Mark Rutland
2014-11-21 15:36 ` Yingjoe Chen
2014-11-19 14:14 ` [PATCH v7 3/4] ARM: mediatek: Add sysirq in mt6589/mt8135/mt8127 dtsi Yingjoe Chen
[not found] ` <1416406451-4578-4-git-send-email-yingjoe.chen-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
2014-11-19 17:49 ` Marc Zyngier
2014-11-20 3:29 ` Yingjoe Chen
2014-11-19 14:14 ` [PATCH v7 4/4] dt-bindings: add bindings for mediatek sysirq Yingjoe Chen
[not found] ` <1416406451-4578-5-git-send-email-yingjoe.chen-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
2014-11-19 18:07 ` Mark Rutland
2014-11-24 15:14 ` Yingjoe Chen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1416406451-4578-3-git-send-email-yingjoe.chen@mediatek.com \
--to=yingjoe.chen@mediatek.com \
--cc=bhelgaas@google.com \
--cc=boris.brezillon@free-electrons.com \
--cc=devicetree@vger.kernel.org \
--cc=eddie.huang@mediatek.com \
--cc=grant.likely@linaro.org \
--cc=hc.yen@mediatek.com \
--cc=jason@lakedaemon.net \
--cc=jiang.liu@linux.intel.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=marc.zyngier@arm.com \
--cc=mark.rutland@arm.com \
--cc=matthias.bgg@gmail.com \
--cc=nathan.chung@mediatek.com \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
--cc=srv_heupstream@mediatek.com \
--cc=tglx@linutronix.de \
--cc=wangyijing@huawei.com \
--cc=yh.chen@mediatek.com \
--cc=yingjoe.chen@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).