From: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
To: Emilio Lopez <emilio-0Z03zUJReD5OxF6Tv1QG9Q@public.gmane.org>,
Maxime Ripard
<maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
Cc: Mike Turquette
<mturquette-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
Linux Media Mailing List
<linux-media-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
devicetree <devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org,
Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
Subject: [PATCH 5/9] rc: sunxi-cir: Add support for the larger fifo found on sun5i and sun6i
Date: Thu, 20 Nov 2014 16:55:24 +0100 [thread overview]
Message-ID: <1416498928-1300-6-git-send-email-hdegoede@redhat.com> (raw)
In-Reply-To: <1416498928-1300-1-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
Add support for the larger fifo found on sun5i and sun6i, having a separate
compatible for the ir found on sun5i & sun6i also is useful if we ever want
to add ir transmit support, because the sun5i & sun6i version do not have
transmit support.
Note this commits also adds checking for the end-of-packet interrupt flag
(which was already enabled), as the fifo-data-available interrupt flag only
gets set when the trigger-level is exceeded. So far we've been getting away
with not doing this because of the low trigger-level, but this is something
which we should have done since day one.
Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
---
.../devicetree/bindings/media/sunxi-ir.txt | 2 +-
drivers/media/rc/sunxi-cir.c | 21 ++++++++++++---------
2 files changed, 13 insertions(+), 10 deletions(-)
diff --git a/Documentation/devicetree/bindings/media/sunxi-ir.txt b/Documentation/devicetree/bindings/media/sunxi-ir.txt
index 23dd5ad..5767128 100644
--- a/Documentation/devicetree/bindings/media/sunxi-ir.txt
+++ b/Documentation/devicetree/bindings/media/sunxi-ir.txt
@@ -1,7 +1,7 @@
Device-Tree bindings for SUNXI IR controller found in sunXi SoC family
Required properties:
-- compatible : should be "allwinner,sun4i-a10-ir";
+- compatible : "allwinner,sun4i-a10-ir" or "allwinner,sun5i-a13-ir"
- clocks : list of clock specifiers, corresponding to
entries in clock-names property;
- clock-names : should contain "apb" and "ir" entries;
diff --git a/drivers/media/rc/sunxi-cir.c b/drivers/media/rc/sunxi-cir.c
index 895fb65..559b0e3 100644
--- a/drivers/media/rc/sunxi-cir.c
+++ b/drivers/media/rc/sunxi-cir.c
@@ -56,12 +56,12 @@
#define REG_RXINT_RAI_EN BIT(4)
/* Rx FIFO available byte level */
-#define REG_RXINT_RAL(val) (((val) << 8) & (GENMASK(11, 8)))
+#define REG_RXINT_RAL(val) ((val) << 8)
/* Rx Interrupt Status */
#define SUNXI_IR_RXSTA_REG 0x30
/* RX FIFO Get Available Counter */
-#define REG_RXSTA_GET_AC(val) (((val) >> 8) & (GENMASK(5, 0)))
+#define REG_RXSTA_GET_AC(val) (((val) >> 8) & (ir->fifo_size * 2 - 1))
/* Clear all interrupt status value */
#define REG_RXSTA_CLEARALL 0xff
@@ -72,10 +72,6 @@
/* CIR_REG register idle threshold */
#define REG_CIR_ITHR(val) (((val) << 8) & (GENMASK(15, 8)))
-/* Hardware supported fifo size */
-#define SUNXI_IR_FIFO_SIZE 16
-/* How many messages in FIFO trigger IRQ */
-#define TRIGGER_LEVEL 8
/* Required frequency for IR0 or IR1 clock in CIR mode */
#define SUNXI_IR_BASE_CLK 8000000
/* Frequency after IR internal divider */
@@ -94,6 +90,7 @@ struct sunxi_ir {
struct rc_dev *rc;
void __iomem *base;
int irq;
+ int fifo_size;
struct clk *clk;
struct clk *apb_clk;
struct reset_control *rst;
@@ -115,11 +112,11 @@ static irqreturn_t sunxi_ir_irq(int irqno, void *dev_id)
/* clean all pending statuses */
writel(status | REG_RXSTA_CLEARALL, ir->base + SUNXI_IR_RXSTA_REG);
- if (status & REG_RXINT_RAI_EN) {
+ if (status & (REG_RXINT_RAI_EN | REG_RXINT_RPEI_EN)) {
/* How many messages in fifo */
rc = REG_RXSTA_GET_AC(status);
/* Sanity check */
- rc = rc > SUNXI_IR_FIFO_SIZE ? SUNXI_IR_FIFO_SIZE : rc;
+ rc = rc > ir->fifo_size ? ir->fifo_size : rc;
/* If we have data */
for (cnt = 0; cnt < rc; cnt++) {
/* for each bit in fifo */
@@ -156,6 +153,11 @@ static int sunxi_ir_probe(struct platform_device *pdev)
if (!ir)
return -ENOMEM;
+ if (of_device_is_compatible(dn, "allwinner,sun5i-a13-ir"))
+ ir->fifo_size = 64;
+ else
+ ir->fifo_size = 16;
+
/* Clock */
ir->apb_clk = devm_clk_get(dev, "apb");
if (IS_ERR(ir->apb_clk)) {
@@ -271,7 +273,7 @@ static int sunxi_ir_probe(struct platform_device *pdev)
* level
*/
writel(REG_RXINT_ROI_EN | REG_RXINT_RPEI_EN |
- REG_RXINT_RAI_EN | REG_RXINT_RAL(TRIGGER_LEVEL - 1),
+ REG_RXINT_RAI_EN | REG_RXINT_RAL(ir->fifo_size / 2 - 1),
ir->base + SUNXI_IR_RXINT_REG);
/* Enable IR Module */
@@ -319,6 +321,7 @@ static int sunxi_ir_remove(struct platform_device *pdev)
static const struct of_device_id sunxi_ir_match[] = {
{ .compatible = "allwinner,sun4i-a10-ir", },
+ { .compatible = "allwinner,sun5i-a13-ir", },
{},
};
--
2.1.0
next prev parent reply other threads:[~2014-11-20 15:55 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-11-20 15:55 [PATCH 0/9] sun6i / A31 ir receiver support Hans de Goede
[not found] ` <1416498928-1300-1-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2014-11-20 15:55 ` [PATCH 1/9] clk: sunxi: Give sunxi_factors_register a registers parameter Hans de Goede
2014-11-21 8:35 ` Maxime Ripard
2014-11-21 8:44 ` Hans de Goede
[not found] ` <546EFB83.1020806-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2014-11-21 11:15 ` Maxime Ripard
2014-11-20 15:55 ` [PATCH 2/9] clk: sunxi: Make sun4i_a10_mod0_data available outside of clk-mod0.c Hans de Goede
2014-11-20 15:55 ` [PATCH 3/9] clk: sunxi: Add prcm mod0 clock driver Hans de Goede
[not found] ` <1416498928-1300-4-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2014-11-20 18:24 ` Chen-Yu Tsai
[not found] ` <CAGb2v66zoAy93mjZn+yf8zvCmkQ8AVWH92jKL-gyu90E5HLuuw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-11-20 19:32 ` Hans de Goede
2014-11-21 8:49 ` Maxime Ripard
2014-11-21 9:13 ` Hans de Goede
[not found] ` <546F0226.2040700-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2014-11-24 22:03 ` Maxime Ripard
2014-11-25 8:29 ` Hans de Goede
[not found] ` <54743DE1.7020704-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2014-11-25 8:37 ` Hans de Goede
2014-11-26 21:13 ` Maxime Ripard
2014-11-27 8:41 ` Hans de Goede
[not found] ` <5476E3A5.4000708-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2014-11-27 9:28 ` Chen-Yu Tsai
[not found] ` <CAGb2v652m0bCdPWFF4LWwjcrCJZvnLibFPw8xXJ3Q-Ge+_-p7g-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-11-27 10:10 ` Hans de Goede
[not found] ` <5476F8AB.2000601-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2014-11-27 19:05 ` Maxime Ripard
2014-11-28 13:37 ` Hans de Goede
[not found] ` <54787A8A.6040209-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2014-12-02 15:45 ` Maxime Ripard
2014-12-03 9:49 ` Hans de Goede
[not found] ` <547EDCA0.4040805-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2014-12-07 18:08 ` Maxime Ripard
2014-12-08 8:19 ` Hans de Goede
[not found] ` <54855EF6.1000900-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2014-12-09 8:51 ` Maxime Ripard
2014-11-27 18:51 ` Maxime Ripard
2014-11-27 16:40 ` Boris Brezillon
2014-11-27 19:15 ` Maxime Ripard
2014-11-20 15:55 ` [PATCH 4/9] rc: sunxi-cir: Add support for an optional reset controller Hans de Goede
2014-11-20 16:28 ` Mauro Carvalho Chehab
[not found] ` <20141120142831.003fb63e-+RedX5hVuTR+urZeOPWqwQ@public.gmane.org>
2014-11-21 8:51 ` Maxime Ripard
[not found] ` <1416498928-1300-5-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2014-11-20 23:05 ` Julian Calaby
2014-11-20 15:55 ` Hans de Goede [this message]
2014-11-20 16:28 ` [PATCH 5/9] rc: sunxi-cir: Add support for the larger fifo found on sun5i and sun6i Mauro Carvalho Chehab
2014-11-21 8:26 ` Maxime Ripard
2014-11-21 8:42 ` Hans de Goede
[not found] ` <546EFAE1.9050506-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2014-11-21 9:59 ` Maxime Ripard
2014-11-21 10:13 ` Hans de Goede
[not found] ` <546F103D.6050004-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2014-11-23 15:47 ` Maxime Ripard
2014-11-20 15:55 ` [PATCH 6/9] ARM: dts: sun6i: Add ir_clk node Hans de Goede
2014-11-20 15:55 ` [PATCH 7/9] ARM: dts: sun6i: Add ir node Hans de Goede
2014-11-20 15:55 ` [PATCH 8/9] ARM: dts: sun6i: Add pinmux settings for the ir pins Hans de Goede
2014-11-20 15:55 ` [PATCH 9/9] ARM: dts: sun6i: Enable ir receiver on the Mele M9 Hans de Goede
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1416498928-1300-6-git-send-email-hdegoede@redhat.com \
--to=hdegoede-h+wxahxf7alqt0dzr+alfa@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=emilio-0Z03zUJReD5OxF6Tv1QG9Q@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-media-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org \
--cc=maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org \
--cc=mturquette-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).