From: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
To: Emilio Lopez <emilio-0Z03zUJReD5OxF6Tv1QG9Q@public.gmane.org>,
Maxime Ripard
<maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>,
Mike Turquette
<mturquette-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
Lee Jones <lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
Samuel Ortiz <sameo-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
Cc: Linux Media Mailing List
<linux-media-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
devicetree <devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org,
Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
Subject: [PATCH v2 1/9] clk: sunxi: Give sunxi_factors_register a registers parameter
Date: Sun, 23 Nov 2014 14:38:07 +0100 [thread overview]
Message-ID: <1416749895-25013-2-git-send-email-hdegoede@redhat.com> (raw)
In-Reply-To: <1416749895-25013-1-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
Before this commit sunxi_factors_register uses of_iomap(node, 0) to get
the clk registers. The sun6i prcm has factor clocks, for which we want to
use sunxi_factors_register, but of_iomap(node, 0) does not work for the prcm
factor clocks, because the prcm uses the mfd framework, so the registers
are not part of the dt-node, instead they are added to the platform_device,
as platform_device resources.
This commit makes getting the registers the callers duty, so that
sunxi_factors_register can be used with mfd instantiated platform device too.
While at it also add error checking to the of_iomap calls.
This commit also drops the __init function from sunxi_factors_register since
platform driver probe functions are not __init.
Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
---
drivers/clk/sunxi/clk-factors.c | 10 ++++------
drivers/clk/sunxi/clk-factors.h | 7 ++++---
drivers/clk/sunxi/clk-mod0.c | 24 ++++++++++++++++++++++--
drivers/clk/sunxi/clk-sun8i-mbus.c | 13 +++++++++++--
drivers/clk/sunxi/clk-sunxi.c | 11 ++++++++++-
5 files changed, 51 insertions(+), 14 deletions(-)
diff --git a/drivers/clk/sunxi/clk-factors.c b/drivers/clk/sunxi/clk-factors.c
index f83ba09..fc4f4b5 100644
--- a/drivers/clk/sunxi/clk-factors.c
+++ b/drivers/clk/sunxi/clk-factors.c
@@ -156,9 +156,10 @@ static const struct clk_ops clk_factors_ops = {
.set_rate = clk_factors_set_rate,
};
-struct clk * __init sunxi_factors_register(struct device_node *node,
- const struct factors_data *data,
- spinlock_t *lock)
+struct clk *sunxi_factors_register(struct device_node *node,
+ const struct factors_data *data,
+ spinlock_t *lock,
+ void __iomem *reg)
{
struct clk *clk;
struct clk_factors *factors;
@@ -168,11 +169,8 @@ struct clk * __init sunxi_factors_register(struct device_node *node,
struct clk_hw *mux_hw = NULL;
const char *clk_name = node->name;
const char *parents[FACTORS_MAX_PARENTS];
- void __iomem *reg;
int i = 0;
- reg = of_iomap(node, 0);
-
/* if we have a mux, we will have >1 parents */
while (i < FACTORS_MAX_PARENTS &&
(parents[i] = of_clk_get_parent_name(node, i)) != NULL)
diff --git a/drivers/clk/sunxi/clk-factors.h b/drivers/clk/sunxi/clk-factors.h
index 9913840..1f5526d 100644
--- a/drivers/clk/sunxi/clk-factors.h
+++ b/drivers/clk/sunxi/clk-factors.h
@@ -37,8 +37,9 @@ struct clk_factors {
spinlock_t *lock;
};
-struct clk * __init sunxi_factors_register(struct device_node *node,
- const struct factors_data *data,
- spinlock_t *lock);
+struct clk *sunxi_factors_register(struct device_node *node,
+ const struct factors_data *data,
+ spinlock_t *lock,
+ void __iomem *reg);
#endif
diff --git a/drivers/clk/sunxi/clk-mod0.c b/drivers/clk/sunxi/clk-mod0.c
index 4a56385..5fb1f7e 100644
--- a/drivers/clk/sunxi/clk-mod0.c
+++ b/drivers/clk/sunxi/clk-mod0.c
@@ -78,7 +78,17 @@ static DEFINE_SPINLOCK(sun4i_a10_mod0_lock);
static void __init sun4i_a10_mod0_setup(struct device_node *node)
{
- sunxi_factors_register(node, &sun4i_a10_mod0_data, &sun4i_a10_mod0_lock);
+ void __iomem *reg;
+
+ reg = of_iomap(node, 0);
+ if (!reg) {
+ pr_err("Could not get registers for mod0-clk: %s\n",
+ node->name);
+ return;
+ }
+
+ sunxi_factors_register(node, &sun4i_a10_mod0_data,
+ &sun4i_a10_mod0_lock, reg);
}
CLK_OF_DECLARE(sun4i_a10_mod0, "allwinner,sun4i-a10-mod0-clk", sun4i_a10_mod0_setup);
@@ -86,7 +96,17 @@ static DEFINE_SPINLOCK(sun5i_a13_mbus_lock);
static void __init sun5i_a13_mbus_setup(struct device_node *node)
{
- struct clk *mbus = sunxi_factors_register(node, &sun4i_a10_mod0_data, &sun5i_a13_mbus_lock);
+ struct clk *mbus;
+ void __iomem *reg;
+
+ reg = of_iomap(node, 0);
+ if (!reg) {
+ pr_err("Could not get registers for a13-mbus-clk\n");
+ return;
+ }
+
+ mbus = sunxi_factors_register(node, &sun4i_a10_mod0_data,
+ &sun5i_a13_mbus_lock, reg);
/* The MBUS clocks needs to be always enabled */
__clk_get(mbus);
diff --git a/drivers/clk/sunxi/clk-sun8i-mbus.c b/drivers/clk/sunxi/clk-sun8i-mbus.c
index 8e49b44..c0629ff 100644
--- a/drivers/clk/sunxi/clk-sun8i-mbus.c
+++ b/drivers/clk/sunxi/clk-sun8i-mbus.c
@@ -68,8 +68,17 @@ static DEFINE_SPINLOCK(sun8i_a23_mbus_lock);
static void __init sun8i_a23_mbus_setup(struct device_node *node)
{
- struct clk *mbus = sunxi_factors_register(node, &sun8i_a23_mbus_data,
- &sun8i_a23_mbus_lock);
+ struct clk *mbus;
+ void __iomem *reg;
+
+ reg = of_iomap(node, 0);
+ if (!reg) {
+ pr_err("Could not get registers for a23-mbus-clk\n");
+ return;
+ }
+
+ mbus = sunxi_factors_register(node, &sun8i_a23_mbus_data,
+ &sun8i_a23_mbus_lock, reg);
/* The MBUS clocks needs to be always enabled */
__clk_get(mbus);
diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c
index b1f66ad..6062a3e 100644
--- a/drivers/clk/sunxi/clk-sunxi.c
+++ b/drivers/clk/sunxi/clk-sunxi.c
@@ -521,7 +521,16 @@ static const struct factors_data sun7i_a20_out_data __initconst = {
static struct clk * __init sunxi_factors_clk_setup(struct device_node *node,
const struct factors_data *data)
{
- return sunxi_factors_register(node, data, &clk_lock);
+ void __iomem *reg;
+
+ reg = of_iomap(node, 0);
+ if (!reg) {
+ pr_err("Could not get registers for factors-clk: %s\n",
+ node->name);
+ return NULL;
+ }
+
+ return sunxi_factors_register(node, data, &clk_lock, reg);
}
--
2.1.0
next prev parent reply other threads:[~2014-11-23 13:38 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-11-23 13:38 [PATCH v2 0/9] sun6i / A31 ir receiver support Hans de Goede
[not found] ` <1416749895-25013-1-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2014-11-23 13:38 ` Hans de Goede [this message]
[not found] ` <1416749895-25013-2-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2014-11-26 20:40 ` [PATCH v2 1/9] clk: sunxi: Give sunxi_factors_register a registers parameter Maxime Ripard
2014-11-23 13:38 ` [PATCH v2 2/9] clk: sunxi: Make sun4i_a10_mod0_data available outside of clk-mod0.c Hans de Goede
2014-11-23 13:38 ` [PATCH v2 3/9] clk: sunxi: Add prcm mod0 clock driver Hans de Goede
[not found] ` <1416749895-25013-4-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2014-11-25 16:57 ` Lee Jones
2014-11-26 8:04 ` Hans de Goede
[not found] ` <547589A9.5060802-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2014-11-27 8:36 ` Lee Jones
2014-11-23 13:38 ` [PATCH v2 4/9] rc: sunxi-cir: Add support for an optional reset controller Hans de Goede
2014-11-23 13:38 ` [PATCH v2 5/9] rc: sunxi-cir: Add support for the larger fifo found on sun5i and sun6i Hans de Goede
2014-11-23 13:38 ` [PATCH v2 6/9] ARM: dts: sun6i: Add ir_clk node Hans de Goede
2014-11-23 13:38 ` [PATCH v2 7/9] ARM: dts: sun6i: Add ir node Hans de Goede
2014-11-23 13:38 ` [PATCH v2 8/9] ARM: dts: sun6i: Add pinmux settings for the ir pins Hans de Goede
[not found] ` <1416749895-25013-9-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2014-11-27 9:14 ` Maxime Ripard
2014-11-23 13:38 ` [PATCH v2 9/9] ARM: dts: sun6i: Enable ir receiver on the Mele M9 Hans de Goede
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1416749895-25013-2-git-send-email-hdegoede@redhat.com \
--to=hdegoede-h+wxahxf7alqt0dzr+alfa@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=emilio-0Z03zUJReD5OxF6Tv1QG9Q@public.gmane.org \
--cc=lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-media-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org \
--cc=maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org \
--cc=mturquette-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=sameo-VuQAYsv1563Yd54FQh9/CA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).