devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
To: Emilio Lopez <emilio-0Z03zUJReD5OxF6Tv1QG9Q@public.gmane.org>,
	Maxime Ripard
	<maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>,
	Mike Turquette
	<mturquette-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
	Lee Jones <lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
	Samuel Ortiz <sameo-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
Cc: Linux Media Mailing List
	<linux-media-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	devicetree <devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
	linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org,
	Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
Subject: [PATCH v2 3/9] clk: sunxi: Add prcm mod0 clock driver
Date: Sun, 23 Nov 2014 14:38:09 +0100	[thread overview]
Message-ID: <1416749895-25013-4-git-send-email-hdegoede@redhat.com> (raw)
In-Reply-To: <1416749895-25013-1-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>

Add a driver for mod0 clocks found in the prcm. Currently there is only
one mod0 clocks in the prcm, the ir clock.

Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
---
 Documentation/devicetree/bindings/clock/sunxi.txt |  1 +
 drivers/clk/sunxi/Makefile                        |  2 +-
 drivers/clk/sunxi/clk-sun6i-prcm-mod0.c           | 63 +++++++++++++++++++++++
 drivers/mfd/sun6i-prcm.c                          | 14 +++++
 4 files changed, 79 insertions(+), 1 deletion(-)
 create mode 100644 drivers/clk/sunxi/clk-sun6i-prcm-mod0.c

diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt
index ed116df..342c75a 100644
--- a/Documentation/devicetree/bindings/clock/sunxi.txt
+++ b/Documentation/devicetree/bindings/clock/sunxi.txt
@@ -56,6 +56,7 @@ Required properties:
 	"allwinner,sun4i-a10-usb-clk" - for usb gates + resets on A10 / A20
 	"allwinner,sun5i-a13-usb-clk" - for usb gates + resets on A13
 	"allwinner,sun6i-a31-usb-clk" - for usb gates + resets on A31
+	"allwinner,sun6i-a31-ir-clk" - for the ir clock on A31
 
 Required properties for all clocks:
 - reg : shall be the control register address for the clock.
diff --git a/drivers/clk/sunxi/Makefile b/drivers/clk/sunxi/Makefile
index 7ddc2b5..daf8b1c 100644
--- a/drivers/clk/sunxi/Makefile
+++ b/drivers/clk/sunxi/Makefile
@@ -10,4 +10,4 @@ obj-y += clk-sun8i-mbus.o
 
 obj-$(CONFIG_MFD_SUN6I_PRCM) += \
 	clk-sun6i-ar100.o clk-sun6i-apb0.o clk-sun6i-apb0-gates.o \
-	clk-sun8i-apb0.o
+	clk-sun8i-apb0.o clk-sun6i-prcm-mod0.o
diff --git a/drivers/clk/sunxi/clk-sun6i-prcm-mod0.c b/drivers/clk/sunxi/clk-sun6i-prcm-mod0.c
new file mode 100644
index 0000000..e80f18e
--- /dev/null
+++ b/drivers/clk/sunxi/clk-sun6i-prcm-mod0.c
@@ -0,0 +1,63 @@
+/*
+ * Allwinner A31 PRCM mod0 clock driver
+ *
+ * Copyright (C) 2014 Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+
+#include "clk-factors.h"
+#include "clk-mod0.h"
+
+static const struct of_device_id sun6i_a31_prcm_mod0_clk_dt_ids[] = {
+	{ .compatible = "allwinner,sun6i-a31-ir-clk" },
+	{ /* sentinel */ }
+};
+
+static DEFINE_SPINLOCK(sun6i_prcm_mod0_lock);
+
+static int sun6i_a31_prcm_mod0_clk_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct resource *r;
+	void __iomem *reg;
+
+	if (!np)
+		return -ENODEV;
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	reg = devm_ioremap_resource(&pdev->dev, r);
+	if (IS_ERR(reg))
+		return PTR_ERR(reg);
+
+	sunxi_factors_register(np, &sun4i_a10_mod0_data,
+			       &sun6i_prcm_mod0_lock, reg);
+	return 0;
+}
+
+static struct platform_driver sun6i_a31_prcm_mod0_clk_driver = {
+	.driver = {
+		.name = "sun6i-a31-prcm-mod0-clk",
+		.of_match_table = sun6i_a31_prcm_mod0_clk_dt_ids,
+	},
+	.probe = sun6i_a31_prcm_mod0_clk_probe,
+};
+module_platform_driver(sun6i_a31_prcm_mod0_clk_driver);
+
+MODULE_DESCRIPTION("Allwinner A31 PRCM mod0 clock driver");
+MODULE_AUTHOR("Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/sun6i-prcm.c b/drivers/mfd/sun6i-prcm.c
index 283ab8d..ff1254f 100644
--- a/drivers/mfd/sun6i-prcm.c
+++ b/drivers/mfd/sun6i-prcm.c
@@ -41,6 +41,14 @@ static const struct resource sun6i_a31_apb0_gates_clk_res[] = {
 	},
 };
 
+static const struct resource sun6i_a31_ir_clk_res[] = {
+	{
+		.start = 0x54,
+		.end = 0x57,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
 static const struct resource sun6i_a31_apb0_rstc_res[] = {
 	{
 		.start = 0xb0,
@@ -69,6 +77,12 @@ static const struct mfd_cell sun6i_a31_prcm_subdevs[] = {
 		.resources = sun6i_a31_apb0_gates_clk_res,
 	},
 	{
+		.name = "sun6i-a31-ir-clk",
+		.of_compatible = "allwinner,sun6i-a31-ir-clk",
+		.num_resources = ARRAY_SIZE(sun6i_a31_ir_clk_res),
+		.resources = sun6i_a31_ir_clk_res,
+	},
+	{
 		.name = "sun6i-a31-apb0-clock-reset",
 		.of_compatible = "allwinner,sun6i-a31-clock-reset",
 		.num_resources = ARRAY_SIZE(sun6i_a31_apb0_rstc_res),
-- 
2.1.0

  parent reply	other threads:[~2014-11-23 13:38 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-11-23 13:38 [PATCH v2 0/9] sun6i / A31 ir receiver support Hans de Goede
     [not found] ` <1416749895-25013-1-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2014-11-23 13:38   ` [PATCH v2 1/9] clk: sunxi: Give sunxi_factors_register a registers parameter Hans de Goede
     [not found]     ` <1416749895-25013-2-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2014-11-26 20:40       ` Maxime Ripard
2014-11-23 13:38   ` [PATCH v2 2/9] clk: sunxi: Make sun4i_a10_mod0_data available outside of clk-mod0.c Hans de Goede
2014-11-23 13:38   ` Hans de Goede [this message]
     [not found]     ` <1416749895-25013-4-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2014-11-25 16:57       ` [PATCH v2 3/9] clk: sunxi: Add prcm mod0 clock driver Lee Jones
2014-11-26  8:04         ` Hans de Goede
     [not found]           ` <547589A9.5060802-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2014-11-27  8:36             ` Lee Jones
2014-11-23 13:38   ` [PATCH v2 4/9] rc: sunxi-cir: Add support for an optional reset controller Hans de Goede
2014-11-23 13:38   ` [PATCH v2 5/9] rc: sunxi-cir: Add support for the larger fifo found on sun5i and sun6i Hans de Goede
2014-11-23 13:38   ` [PATCH v2 6/9] ARM: dts: sun6i: Add ir_clk node Hans de Goede
2014-11-23 13:38   ` [PATCH v2 7/9] ARM: dts: sun6i: Add ir node Hans de Goede
2014-11-23 13:38   ` [PATCH v2 8/9] ARM: dts: sun6i: Add pinmux settings for the ir pins Hans de Goede
     [not found]     ` <1416749895-25013-9-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2014-11-27  9:14       ` Maxime Ripard
2014-11-23 13:38   ` [PATCH v2 9/9] ARM: dts: sun6i: Enable ir receiver on the Mele M9 Hans de Goede

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1416749895-25013-4-git-send-email-hdegoede@redhat.com \
    --to=hdegoede-h+wxahxf7alqt0dzr+alfa@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=emilio-0Z03zUJReD5OxF6Tv1QG9Q@public.gmane.org \
    --cc=lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
    --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=linux-media-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org \
    --cc=maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org \
    --cc=mturquette-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
    --cc=sameo-VuQAYsv1563Yd54FQh9/CA@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).