devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Kevin Cernekee <cernekee@gmail.com>
To: gregkh@linuxfoundation.org, jslaby@suse.cz, robh@kernel.org,
	grant.likely@linaro.org
Cc: arnd@arndb.de, f.fainelli@gmail.com,
	linux-serial@vger.kernel.org, devicetree@vger.kernel.org,
	linux-mips@linux-mips.org
Subject: [PATCH V3 4/7] serial: core: Add big-endian iotype
Date: Mon, 24 Nov 2014 15:36:19 -0800	[thread overview]
Message-ID: <1416872182-6440-5-git-send-email-cernekee@gmail.com> (raw)
In-Reply-To: <1416872182-6440-1-git-send-email-cernekee@gmail.com>

Since most drivers interpret UPIO_MEM32 to mean "little-endian" and use
readl/writel to access the registers, add a parallel UPIO_MEM32BE to
request the use of big-endian MMIO accessors (ioread32be/iowrite32be).

Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
---
 drivers/tty/serial/serial_core.c |  2 ++
 include/linux/serial_core.h      | 13 +++++++------
 2 files changed, 9 insertions(+), 6 deletions(-)

diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index eaeb9a0..ecc7d6c 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -2092,6 +2092,7 @@ uart_report_port(struct uart_driver *drv, struct uart_port *port)
 		break;
 	case UPIO_MEM:
 	case UPIO_MEM32:
+	case UPIO_MEM32BE:
 	case UPIO_AU:
 	case UPIO_TSI:
 		snprintf(address, sizeof(address),
@@ -2736,6 +2737,7 @@ int uart_match_port(struct uart_port *port1, struct uart_port *port2)
 		       (port1->hub6   == port2->hub6);
 	case UPIO_MEM:
 	case UPIO_MEM32:
+	case UPIO_MEM32BE:
 	case UPIO_AU:
 	case UPIO_TSI:
 		return (port1->mapbase == port2->mapbase);
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index 21c2e05..d2d5bf6 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -140,12 +140,13 @@ struct uart_port {
 	unsigned char		iotype;			/* io access style */
 	unsigned char		unused1;
 
-#define UPIO_PORT		(0)
-#define UPIO_HUB6		(1)
-#define UPIO_MEM		(2)
-#define UPIO_MEM32		(3)
-#define UPIO_AU			(4)			/* Au1x00 and RT288x type IO */
-#define UPIO_TSI		(5)			/* Tsi108/109 type IO */
+#define UPIO_PORT		(0)			/* 8b I/O port access */
+#define UPIO_HUB6		(1)			/* Hub6 ISA card */
+#define UPIO_MEM		(2)			/* 8b MMIO access */
+#define UPIO_MEM32		(3)			/* 32b little endian */
+#define UPIO_MEM32BE		(4)			/* 32b big endian */
+#define UPIO_AU			(5)			/* Au1x00 and RT288x type IO */
+#define UPIO_TSI		(6)			/* Tsi108/109 type IO */
 
 	unsigned int		read_status_mask;	/* driver specific */
 	unsigned int		ignore_status_mask;	/* driver specific */
-- 
2.1.0


  parent reply	other threads:[~2014-11-24 23:36 UTC|newest]

Thread overview: 36+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-11-24 23:36 [PATCH V3 0/7] serial: Configure {big,native}-endian MMIO accesses via DT Kevin Cernekee
2014-11-24 23:36 ` [PATCH V3 1/7] of: Add helper function to check MMIO register endianness Kevin Cernekee
2014-11-24 23:36 ` [PATCH V3 2/7] of/fdt: Add endianness helper function for early init code Kevin Cernekee
2014-11-24 23:36 ` [PATCH V3 3/7] of: Document {little,big,native}-endian bindings Kevin Cernekee
     [not found]   ` <1416872182-6440-4-git-send-email-cernekee-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2015-03-02 13:14     ` Peter Hurley
     [not found]       ` <54F4624D.6000909-WaGBZJeGNqdsbIuE7sb01tBPR1lH4CV8@public.gmane.org>
2015-03-02 14:56         ` Kevin Cernekee
     [not found]           ` <CAJiQ=7DQ6CRWddii_9HZqH0a_1ixos6FBQRzb+HM+YAh1jmkBA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-03-02 16:08             ` Peter Hurley
     [not found]               ` <54F48B03.5040205-WaGBZJeGNqdsbIuE7sb01tBPR1lH4CV8@public.gmane.org>
2015-03-02 16:28                 ` Kevin Cernekee
     [not found]                   ` <CAJiQ=7CKE5Nw=maewN_ChkySh1NReoUnddLO_ohOJQfwo_FXAg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-03-02 17:45                     ` Peter Hurley
     [not found]                       ` <54F4A1B6.8030701-WaGBZJeGNqdsbIuE7sb01tBPR1lH4CV8@public.gmane.org>
2015-03-02 18:57                         ` Kevin Cernekee
     [not found]                           ` <CAJiQ=7CDAifvcMkrAsseXHHC_GGMJg-+UiWVY03JAzDqSFzi+g-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-03-20 23:48                             ` Grant Likely
2014-11-24 23:36 ` Kevin Cernekee [this message]
     [not found] ` <1416872182-6440-1-git-send-email-cernekee-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2014-11-24 23:36   ` [PATCH V3 5/7] serial: earlycon: Set UPIO_MEM32BE based on DT properties Kevin Cernekee
     [not found]     ` <1416872182-6440-6-git-send-email-cernekee-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2015-03-01 22:23       ` Peter Hurley
     [not found]         ` <54F3914F.3080905-WaGBZJeGNqdsbIuE7sb01tBPR1lH4CV8@public.gmane.org>
2015-03-28  1:36           ` Grant Likely
     [not found]             ` <20150328013604.488A0C4091F-WNowdnHR2B42iJbIjFUEsiwD8/FfD2ys@public.gmane.org>
2015-03-28 17:01               ` Peter Hurley
     [not found]                 ` <5516DE64.6000104-WaGBZJeGNqdsbIuE7sb01tBPR1lH4CV8@public.gmane.org>
2015-03-28 19:28                   ` Kevin Cernekee
     [not found]                     ` <CAJiQ=7AS5+HkHcjRsYKi-EHVc3F1fg3Zp=1fCor1HrKeSWU72Q-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-04-02 15:36                       ` Peter Hurley
     [not found]                         ` <551D6208.2060009-WaGBZJeGNqdsbIuE7sb01tBPR1lH4CV8@public.gmane.org>
2015-04-08 17:56                           ` Peter Hurley
2015-04-02 16:15                       ` Peter Hurley
2015-04-02 13:32                   ` Grant Likely
     [not found]                     ` <20150402133250.740C1C408D6-WNowdnHR2B42iJbIjFUEsiwD8/FfD2ys@public.gmane.org>
2015-04-02 15:33                       ` Peter Hurley
2015-04-02 13:46                   ` Rob Herring
     [not found]                     ` <CAL_JsqKQD2ivpZ5kOy8ehmzsdFy8EMFZ-KvO2QS3fxtLgQL8Lw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-04-02 15:35                       ` Peter Hurley
     [not found]                         ` <551D61A5.8000604-WaGBZJeGNqdsbIuE7sb01tBPR1lH4CV8@public.gmane.org>
2015-04-06 17:36                           ` Peter Hurley
     [not found]                             ` <5522C40E.5060705-WaGBZJeGNqdsbIuE7sb01tBPR1lH4CV8@public.gmane.org>
2015-04-06 21:07                               ` Rob Herring
2014-11-24 23:36 ` [PATCH V3 6/7] serial: of_serial: Support big-endian register accesses Kevin Cernekee
2014-11-24 23:36 ` [PATCH V3 7/7] serial: 8250: Add support for big-endian MMIO accesses Kevin Cernekee
2014-11-24 23:55 ` [PATCH V3 0/7] serial: Configure {big,native}-endian MMIO accesses via DT Florian Fainelli
2014-11-25 10:21 ` Arnd Bergmann
2014-11-25 15:10 ` Grant Likely
2014-11-25 17:38   ` Greg KH
2014-11-25 21:11     ` Greg KH
2014-11-26 13:14       ` Grant Likely
     [not found]         ` <CACxGe6uifCPz6RM59MVODWo2WGoVBMWSFzmL9Uz3AVJ0C9-hig-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-02-21 20:53           ` Kevin Cernekee
     [not found]             ` <CAJiQ=7AMG44h7d2Fuw_ZLynPP62EcD++_kttBymqZgcKK=V8Ug-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-02-21 22:18               ` Rob Herring

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1416872182-6440-5-git-send-email-cernekee@gmail.com \
    --to=cernekee@gmail.com \
    --cc=arnd@arndb.de \
    --cc=devicetree@vger.kernel.org \
    --cc=f.fainelli@gmail.com \
    --cc=grant.likely@linaro.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=jslaby@suse.cz \
    --cc=linux-mips@linux-mips.org \
    --cc=linux-serial@vger.kernel.org \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).