From: Kevin Cernekee <cernekee@gmail.com>
To: sre@kernel.org, dbaryshkov@gmail.com, dwmw2@infradead.org,
arnd@arndb.de, linux@prisktech.co.nz, stern@rowland.harvard.edu,
gregkh@linuxfoundation.org, f.fainelli@gmail.com
Cc: grant.likely@linaro.org, robh+dt@kernel.org,
computersforpeace@gmail.com, marc.ceeeee@gmail.com,
linux-pm@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, linux-usb@vger.kernel.org,
linux-mips@linux-mips.org
Subject: [PATCH 9/9] usb: {ohci,ehci}-platform: Use new OF big-endian helper function
Date: Tue, 25 Nov 2014 16:49:54 -0800 [thread overview]
Message-ID: <1416962994-27095-10-git-send-email-cernekee@gmail.com> (raw)
In-Reply-To: <1416962994-27095-1-git-send-email-cernekee@gmail.com>
This handles the existing "big-endian" case, and in addition, it also does
the right thing when "native-endian" is specified.
Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
---
Documentation/devicetree/bindings/usb/usb-ehci.txt | 2 ++
Documentation/devicetree/bindings/usb/usb-ohci.txt | 2 ++
drivers/usb/host/ehci-platform.c | 2 +-
drivers/usb/host/ohci-platform.c | 2 +-
4 files changed, 6 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/usb/usb-ehci.txt b/Documentation/devicetree/bindings/usb/usb-ehci.txt
index 43c1a4e..9505c31 100644
--- a/Documentation/devicetree/bindings/usb/usb-ehci.txt
+++ b/Documentation/devicetree/bindings/usb/usb-ehci.txt
@@ -12,6 +12,8 @@ Optional properties:
- big-endian-regs : boolean, set this for hcds with big-endian registers
- big-endian-desc : boolean, set this for hcds with big-endian descriptors
- big-endian : boolean, for hcds with big-endian-regs + big-endian-desc
+ - native-endian : boolean, enables big-endian-regs + big-endian-desc
+ iff the kernel was compiled for big endian
- clocks : a list of phandle + clock specifier pairs
- phys : phandle + phy specifier pair
- phy-names : "usb"
diff --git a/Documentation/devicetree/bindings/usb/usb-ohci.txt b/Documentation/devicetree/bindings/usb/usb-ohci.txt
index 19233b7..3bb9673 100644
--- a/Documentation/devicetree/bindings/usb/usb-ohci.txt
+++ b/Documentation/devicetree/bindings/usb/usb-ohci.txt
@@ -9,6 +9,8 @@ Optional properties:
- big-endian-regs : boolean, set this for hcds with big-endian registers
- big-endian-desc : boolean, set this for hcds with big-endian descriptors
- big-endian : boolean, for hcds with big-endian-regs + big-endian-desc
+- native-endian : boolean, enables big-endian-regs + big-endian-desc
+ iff the kernel was compiled for big endian
- no-big-frame-no : boolean, set if frame_no lives in bits [15:0] of HCCA
- num-ports : u32, to override the detected port count
- clocks : a list of phandle + clock specifier pairs
diff --git a/drivers/usb/host/ehci-platform.c b/drivers/usb/host/ehci-platform.c
index 2f5b9ce..0da9d70 100644
--- a/drivers/usb/host/ehci-platform.c
+++ b/drivers/usb/host/ehci-platform.c
@@ -187,7 +187,7 @@ static int ehci_platform_probe(struct platform_device *dev)
if (of_property_read_bool(dev->dev.of_node, "big-endian-desc"))
ehci->big_endian_desc = 1;
- if (of_property_read_bool(dev->dev.of_node, "big-endian"))
+ if (of_device_is_big_endian(dev->dev.of_node))
ehci->big_endian_mmio = ehci->big_endian_desc = 1;
priv->phy = devm_phy_get(&dev->dev, "usb");
diff --git a/drivers/usb/host/ohci-platform.c b/drivers/usb/host/ohci-platform.c
index 7793c3c..029a606 100644
--- a/drivers/usb/host/ohci-platform.c
+++ b/drivers/usb/host/ohci-platform.c
@@ -157,7 +157,7 @@ static int ohci_platform_probe(struct platform_device *dev)
if (of_property_read_bool(dev->dev.of_node, "big-endian-desc"))
ohci->flags |= OHCI_QUIRK_BE_DESC;
- if (of_property_read_bool(dev->dev.of_node, "big-endian"))
+ if (of_device_is_big_endian(dev->dev.of_node))
ohci->flags |= OHCI_QUIRK_BE_MMIO | OHCI_QUIRK_BE_DESC;
if (of_property_read_bool(dev->dev.of_node, "no-big-frame-no"))
--
2.1.0
next prev parent reply other threads:[~2014-11-26 0:49 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-11-26 0:49 [PATCH 0/9] Extend various drivers to run on bi-endian BMIPS hosts Kevin Cernekee
2014-11-26 0:49 ` [PATCH 1/9] power/reset: brcmstb: Make the driver buildable on MIPS Kevin Cernekee
[not found] ` <1416962994-27095-2-git-send-email-cernekee-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2015-01-22 1:46 ` Sebastian Reichel
2014-11-26 0:49 ` [PATCH 2/9] power/reset: brcmstb: Use the DT "compatible" string to indicate bit positions Kevin Cernekee
2015-01-22 1:46 ` Sebastian Reichel
2014-11-26 0:49 ` [PATCH 7/9] bus: brcmstb_gisb: Add register offset tables for older chips Kevin Cernekee
[not found] ` <1416962994-27095-1-git-send-email-cernekee-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2014-11-26 0:49 ` [PATCH 3/9] power/reset: brcmstb: Add support for old 65nm chips Kevin Cernekee
[not found] ` <1416962994-27095-4-git-send-email-cernekee-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2015-01-22 1:47 ` Sebastian Reichel
2014-11-26 0:49 ` [PATCH 4/9] bus: brcmstb_gisb: Make the driver buildable on MIPS Kevin Cernekee
2014-11-26 0:49 ` [PATCH 5/9] bus: brcmstb_gisb: Introduce wrapper functions for MMIO accesses Kevin Cernekee
2014-11-26 0:49 ` [PATCH 6/9] bus: brcmstb_gisb: Look up register offsets in a table Kevin Cernekee
2014-11-26 0:49 ` [PATCH 8/9] bus: brcmstb_gisb: Honor the "big-endian" and "native-endian" DT properties Kevin Cernekee
2015-02-09 21:59 ` Florian Fainelli
[not found] ` <1416962994-27095-9-git-send-email-cernekee-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2015-05-29 4:01 ` Florian Fainelli
2014-11-26 0:49 ` Kevin Cernekee [this message]
2014-11-26 4:15 ` [PATCH 9/9] usb: {ohci,ehci}-platform: Use new OF big-endian helper function Tony Prisk
2014-11-26 15:14 ` Alan Stern
[not found] ` <Pine.LNX.4.44L0.1411261013340.1322-100000-IYeN2dnnYyZXsRXLowluHWD2FQJk+8+b@public.gmane.org>
2014-11-26 16:07 ` Kevin Cernekee
[not found] ` <CAJiQ=7CuLA2vDpnkDysBU100R0uuUidB_ua3sZdV74vNPjV76w-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-11-26 16:24 ` Alan Stern
2014-11-26 5:33 ` [PATCH 0/9] Extend various drivers to run on bi-endian BMIPS hosts Florian Fainelli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1416962994-27095-10-git-send-email-cernekee@gmail.com \
--to=cernekee@gmail.com \
--cc=arnd@arndb.de \
--cc=computersforpeace@gmail.com \
--cc=dbaryshkov@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=dwmw2@infradead.org \
--cc=f.fainelli@gmail.com \
--cc=grant.likely@linaro.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-mips@linux-mips.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=linux@prisktech.co.nz \
--cc=marc.ceeeee@gmail.com \
--cc=robh+dt@kernel.org \
--cc=sre@kernel.org \
--cc=stern@rowland.harvard.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).