From: Ajay Kumar <ajaykumar.rs@samsung.com>
To: dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org,
linux-samsung-soc@vger.kernel.org, inki.dae@samsung.com
Cc: jy0922.shim@samsung.com, jg1.han@samsung.com,
seanpaul@google.com, ajaynumb@gmail.com, bhushan.r@samsung.com,
prashanth.g@samsung.com, Ajay Kumar <ajaykumar.rs@samsung.com>
Subject: [PATCH 1/2] drm/exynos: fimd: Remove drm_dev pointer from fimd_context
Date: Fri, 28 Nov 2014 16:44:00 +0530 [thread overview]
Message-ID: <1417173241-27802-1-git-send-email-ajaykumar.rs@samsung.com> (raw)
ctx->drm_dev is unnecessary since it can be easily
accessed via ctx->manager->drm_dev, cleaning it up.
Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com>
---
drivers/gpu/drm/exynos/exynos_drm_fimd.c | 25 +++++++++++++------------
1 file changed, 13 insertions(+), 12 deletions(-)
diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimd.c b/drivers/gpu/drm/exynos/exynos_drm_fimd.c
index e5810d1..122c851 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_fimd.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_fimd.c
@@ -159,7 +159,6 @@ struct fimd_win_data {
struct fimd_context {
struct exynos_drm_manager manager;
struct device *dev;
- struct drm_device *drm_dev;
struct clk *bus_clk;
struct clk *lcd_clk;
void __iomem *regs;
@@ -298,17 +297,17 @@ static int fimd_mgr_initialize(struct exynos_drm_manager *mgr,
struct exynos_drm_private *priv;
priv = drm_dev->dev_private;
- mgr->drm_dev = ctx->drm_dev = drm_dev;
+ mgr->drm_dev = drm_dev;
mgr->pipe = ctx->pipe = priv->pipe++;
/* attach this sub driver to iommu mapping if supported. */
- if (is_drm_iommu_supported(ctx->drm_dev)) {
+ if (is_drm_iommu_supported(mgr->drm_dev)) {
/*
* If any channel is already active, iommu will throw
* a PAGE FAULT when enabled. So clear any channel if enabled.
*/
fimd_clear_channel(mgr);
- drm_iommu_attach_device(ctx->drm_dev, ctx->dev);
+ drm_iommu_attach_device(mgr->drm_dev, ctx->dev);
}
return 0;
@@ -319,8 +318,8 @@ static void fimd_mgr_remove(struct exynos_drm_manager *mgr)
struct fimd_context *ctx = mgr_to_fimd(mgr);
/* detach this sub driver from iommu mapping if supported. */
- if (is_drm_iommu_supported(ctx->drm_dev))
- drm_iommu_detach_device(ctx->drm_dev, ctx->dev);
+ if (is_drm_iommu_supported(mgr->drm_dev))
+ drm_iommu_detach_device(mgr->drm_dev, ctx->dev);
}
static u32 fimd_calc_clkdiv(struct fimd_context *ctx,
@@ -1001,7 +1000,7 @@ static void fimd_te_handler(struct exynos_drm_manager *mgr)
struct fimd_context *ctx = mgr_to_fimd(mgr);
/* Checks the crtc is detached already from encoder */
- if (ctx->pipe < 0 || !ctx->drm_dev)
+ if (ctx->pipe < 0 || !mgr->drm_dev)
return;
/*
@@ -1018,7 +1017,7 @@ static void fimd_te_handler(struct exynos_drm_manager *mgr)
}
if (test_bit(0, &ctx->irq_flags))
- drm_handle_vblank(ctx->drm_dev, ctx->pipe);
+ drm_handle_vblank(mgr->drm_dev, ctx->pipe);
}
static struct exynos_drm_manager_ops fimd_manager_ops = {
@@ -1047,17 +1046,19 @@ static irqreturn_t fimd_irq_handler(int irq, void *dev_id)
writel(clear_bit, ctx->regs + VIDINTCON1);
/* check the crtc is detached already from encoder */
- if (ctx->pipe < 0 || !ctx->drm_dev)
+ if (ctx->pipe < 0 || !ctx->manager.drm_dev)
goto out;
if (ctx->i80_if) {
- exynos_drm_crtc_finish_pageflip(ctx->drm_dev, ctx->pipe);
+ exynos_drm_crtc_finish_pageflip(ctx->manager.drm_dev,
+ ctx->pipe);
/* Exits triggering mode */
atomic_set(&ctx->triggering, 0);
} else {
- drm_handle_vblank(ctx->drm_dev, ctx->pipe);
- exynos_drm_crtc_finish_pageflip(ctx->drm_dev, ctx->pipe);
+ drm_handle_vblank(ctx->manager.drm_dev, ctx->pipe);
+ exynos_drm_crtc_finish_pageflip(ctx->manager.drm_dev,
+ ctx->pipe);
/* set wait vsync event to zero and wake up queue. */
if (atomic_read(&ctx->wait_vsync_event)) {
--
1.7.9.5
next reply other threads:[~2014-11-28 11:14 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-11-28 11:14 Ajay Kumar [this message]
2014-11-28 11:14 ` [PATCH 2/2] drm/exynos: fimd: check error status for drm_iommu_attach_device Ajay Kumar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1417173241-27802-1-git-send-email-ajaykumar.rs@samsung.com \
--to=ajaykumar.rs@samsung.com \
--cc=ajaynumb@gmail.com \
--cc=bhushan.r@samsung.com \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=inki.dae@samsung.com \
--cc=jg1.han@samsung.com \
--cc=jy0922.shim@samsung.com \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=prashanth.g@samsung.com \
--cc=seanpaul@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).