From: Harini Katakam <harinik-gjFFaj9aHVfQT0dZR+AlfA@public.gmane.org>
To: wsa-z923LK4zBo2bacvFa/9K2g@public.gmane.org,
grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
pawel.moll-5wv7dgnIgG8@public.gmane.org,
mark.rutland-5wv7dgnIgG8@public.gmane.org,
ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org,
galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org
Cc: michal.simek-gjFFaj9aHVfQT0dZR+AlfA@public.gmane.org,
soren.brinkmann-gjFFaj9aHVfQT0dZR+AlfA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
harinik-gjFFaj9aHVfQT0dZR+AlfA@public.gmane.org,
vishnum-gjFFaj9aHVfQT0dZR+AlfA@public.gmane.org
Subject: [PATCH 4/4] i2c: cadence: Defeature repeated start based on devicetree property
Date: Tue, 2 Dec 2014 15:35:49 +0530 [thread overview]
Message-ID: <1417514749-24319-5-git-send-email-harinik@xilinx.com> (raw)
In-Reply-To: <1417514749-24319-1-git-send-email-harinik-gjFFaj9aHVfQT0dZR+AlfA@public.gmane.org>
From: Vishnu Motghare <vishnum-gjFFaj9aHVfQT0dZR+AlfA@public.gmane.org>
This patch defeatures repeated start in the driver if
"defeature-repeated-start" property is present in the devicetree.
This defeature is proposed due to a few bugs in the controller
- completion indication is not given to the driver at the end of
a read/receive transfer with HOLD bit set.
- Invalid read transaction are generated on the bus when HW timeout
condition occurs with HOLD bit set.
Signed-off-by: Vishnu Motghare <vishnum-gjFFaj9aHVfQT0dZR+AlfA@public.gmane.org>
Signed-off-by: Harini Katakam <harinik-gjFFaj9aHVfQT0dZR+AlfA@public.gmane.org>
---
drivers/i2c/busses/i2c-cadence.c | 44 +++++++++++++++++++++++++++-----------
1 file changed, 31 insertions(+), 13 deletions(-)
diff --git a/drivers/i2c/busses/i2c-cadence.c b/drivers/i2c/busses/i2c-cadence.c
index 8065205..89335f7 100644
--- a/drivers/i2c/busses/i2c-cadence.c
+++ b/drivers/i2c/busses/i2c-cadence.c
@@ -135,6 +135,7 @@
* @bus_hold_flag: Flag used in repeated start for clearing HOLD bit
* @clk: Pointer to struct clk
* @clk_rate_change_nb: Notifier block for clock rate changes
+ * @defeature_repeated_start: Flag to de feature repeated start
*/
struct cdns_i2c {
void __iomem *membase;
@@ -154,6 +155,7 @@ struct cdns_i2c {
unsigned int bus_hold_flag;
struct clk *clk;
struct notifier_block clk_rate_change_nb;
+ unsigned int defeature_repeated_start;
};
#define to_cdns_i2c(_nb) container_of(_nb, struct cdns_i2c, \
@@ -246,7 +248,7 @@ static irqreturn_t cdns_i2c_isr(int irq, void *ptr)
}
if ((isr_status & CDNS_I2C_IXR_COMP) && !id->recv_count) {
- if (!id->bus_hold_flag)
+ if (id->defeature_repeated_start || !id->bus_hold_flag)
cdns_i2c_clear_bus_hold(id);
done_flag = 1;
}
@@ -283,7 +285,8 @@ static irqreturn_t cdns_i2c_isr(int irq, void *ptr)
*/
done_flag = 1;
}
- if (!id->send_count && !id->bus_hold_flag)
+ if ((id->defeature_repeated_start && !id->send_count) ||
+ (!id->send_count && !id->bus_hold_flag))
cdns_i2c_clear_bus_hold(id);
status = IRQ_HANDLED;
@@ -347,10 +350,15 @@ static void cdns_i2c_mrecv(struct cdns_i2c *id)
} else
cdns_i2c_writereg(id->recv_count, CDNS_I2C_XFER_SIZE_OFFSET);
/* Clear the bus hold flag if bytes to receive is less than FIFO size */
- if (!id->bus_hold_flag &&
- ((id->p_msg->flags & I2C_M_RECV_LEN) != I2C_M_RECV_LEN) &&
- (id->recv_count <= CDNS_I2C_FIFO_DEPTH))
- cdns_i2c_clear_bus_hold(id);
+ if (id->defeature_repeated_start &&
+ (((id->p_msg->flags & I2C_M_RECV_LEN) != I2C_M_RECV_LEN) &&
+ (id->recv_count <= CDNS_I2C_FIFO_DEPTH)))
+ cdns_i2c_clear_bus_hold(id);
+ else if (!id->bus_hold_flag &&
+ ((id->p_msg->flags & I2C_M_RECV_LEN) != I2C_M_RECV_LEN) &&
+ (id->recv_count <= CDNS_I2C_FIFO_DEPTH))
+ cdns_i2c_clear_bus_hold(id);
+
/* Set the slave address in address register - triggers operation */
cdns_i2c_writereg(id->p_msg->addr & CDNS_I2C_ADDR_MASK,
CDNS_I2C_ADDR_OFFSET);
@@ -411,8 +419,10 @@ static void cdns_i2c_msend(struct cdns_i2c *id)
* Clear the bus hold flag if there is no more data
* and if it is the last message.
*/
- if (!id->bus_hold_flag && !id->send_count)
+ if ((id->defeature_repeated_start && !id->send_count) ||
+ (!id->send_count && !id->bus_hold_flag))
cdns_i2c_clear_bus_hold(id);
+
/* Set the slave address in address register - triggers operation. */
cdns_i2c_writereg(id->p_msg->addr & CDNS_I2C_ADDR_MASK,
CDNS_I2C_ADDR_OFFSET);
@@ -520,19 +530,25 @@ static int cdns_i2c_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
/*
* Set the flag to one when multiple messages are to be
* processed with a repeated start.
+ * De feature repeated start when defeature_repeated_start flag is set
*/
- if (num > 1) {
- id->bus_hold_flag = 1;
- reg = cdns_i2c_readreg(CDNS_I2C_CR_OFFSET);
- reg |= CDNS_I2C_CR_HOLD;
- cdns_i2c_writereg(reg, CDNS_I2C_CR_OFFSET);
+ if (!id->defeature_repeated_start && num > 1) {
+ for (count = 0; count < num-1; count++) {
+ if (msgs[count].flags & I2C_M_RD)
+ return -EINVAL;
+ }
+ id->bus_hold_flag = 1;
+ reg = cdns_i2c_readreg(CDNS_I2C_CR_OFFSET);
+ reg |= CDNS_I2C_CR_HOLD;
+ cdns_i2c_writereg(reg, CDNS_I2C_CR_OFFSET);
} else {
id->bus_hold_flag = 0;
}
/* Process the msg one by one */
for (count = 0; count < num; count++, msgs++) {
- if (count == (num - 1))
+ if (!id->defeature_repeated_start &&
+ (count == (num - 1)))
id->bus_hold_flag = 0;
ret = cdns_i2c_process_msg(id, msgs, adap);
@@ -840,6 +856,8 @@ static int cdns_i2c_probe(struct platform_device *pdev)
cdns_i2c_writereg(CDNS_I2C_CR_ACK_EN | CDNS_I2C_CR_NEA | CDNS_I2C_CR_MS,
CDNS_I2C_CR_OFFSET);
+ of_property_read_u32(pdev->dev.of_node, "defeature-repeated-start",
+ &id->defeature_repeated_start);
ret = cdns_i2c_setclk(id->input_clk, id);
if (ret) {
dev_err(&pdev->dev, "invalid SCL clock: %u Hz\n", id->i2c_clk);
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2014-12-02 10:05 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-02 10:05 [PATCH 0/4] Cadence I2C driver fixes Harini Katakam
2014-12-02 10:05 ` [PATCH 1/4] i2c: cadence: Handle > 252 byte transfers Harini Katakam
[not found] ` <1417514749-24319-1-git-send-email-harinik-gjFFaj9aHVfQT0dZR+AlfA@public.gmane.org>
2014-12-02 10:05 ` [PATCH 2/4] i2c: cadence: Set the hardware time-out register to maximum value Harini Katakam
2014-12-03 11:28 ` Wolfram Sang
2014-12-02 10:05 ` [PATCH 3/4] devicetree: bindings: Add defeature-repeated-start property for Cadence I2C Harini Katakam
2014-12-02 11:19 ` Mark Rutland
2014-12-02 12:13 ` Harini Katakam
[not found] ` <CAFcVECLtPx6shBXJbg9Uf_8fnhkMoO1zpoxGcdda7PSA7z_2rA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-12-02 12:52 ` Wolfram Sang
2014-12-02 13:10 ` Harini Katakam
[not found] ` <CAFcVECJwFoFd6GrmF282CG+fELnYb=FNCTDq=RYKky_dHha=Jg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-12-02 13:16 ` Wolfram Sang
2014-12-02 13:30 ` Harini Katakam
2014-12-02 14:15 ` Wolfram Sang
2014-12-02 15:12 ` Lars-Peter Clausen
2014-12-02 10:05 ` Harini Katakam [this message]
[not found] ` <1417514749-24319-5-git-send-email-harinik-gjFFaj9aHVfQT0dZR+AlfA@public.gmane.org>
2014-12-02 11:21 ` [PATCH 4/4] i2c: cadence: Defeature repeated start based on devicetree property Mark Rutland
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1417514749-24319-5-git-send-email-harinik@xilinx.com \
--to=harinik-gjffaj9ahvfqt0dzr+alfa@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
--cc=grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=michal.simek-gjFFaj9aHVfQT0dZR+AlfA@public.gmane.org \
--cc=pawel.moll-5wv7dgnIgG8@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=soren.brinkmann-gjFFaj9aHVfQT0dZR+AlfA@public.gmane.org \
--cc=vishnum-gjFFaj9aHVfQT0dZR+AlfA@public.gmane.org \
--cc=wsa-z923LK4zBo2bacvFa/9K2g@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).