From mboxrd@z Thu Jan 1 00:00:00 1970 From: Anson Huang Subject: [PATCH 2/2] arm: dts: imx6dl: correct cpufreq volt/freq table Date: Fri, 5 Dec 2014 16:23:49 +0800 Message-ID: <1417767829-11314-2-git-send-email-b20788@freescale.com> References: <1417767829-11314-1-git-send-email-b20788@freescale.com> Mime-Version: 1.0 Content-Type: text/plain Return-path: In-Reply-To: <1417767829-11314-1-git-send-email-b20788-KZfg59tc24xl57MIdRCFDg@public.gmane.org> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org, kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org List-Id: devicetree@vger.kernel.org Currently the cpufreq volt/freq table we used is for LDO enable mode, according to latest datasheet Rev. 3, 03/2014, the volt/freq table is as below: LDO enabled(min value): 996MHz: VDDARM: 1.225V, VDDSOC: 1.150V; 792MHz: VDDARM: 1.150V, VDDSOC: 1.150V; 396MHz: VDDARM: 1.050V, VDDSOC: 1.150V; LDO bypassed(min value): 996MHz: VDDARM: 1.250V, VDDSOC: 1.150V; 792MHz: VDDARM: 1.150V, VDDSOC: 1.150V; 396MHz: VDDARM: 1.050V, VDDSOC: 1.150V; Adding 25mV to cover board IR drop, for LDO enabled mode of 996MHz, VDDARM should be 1.250V, so this patch updates it. Signed-off-by: Anson Huang --- arch/arm/boot/dts/imx6dl.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi index 1ac2fe7..f94bf72 100644 --- a/arch/arm/boot/dts/imx6dl.dtsi +++ b/arch/arm/boot/dts/imx6dl.dtsi @@ -28,7 +28,7 @@ next-level-cache = <&L2>; operating-points = < /* kHz uV */ - 996000 1275000 + 996000 1250000 792000 1175000 396000 1075000 >; -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html