From mboxrd@z Thu Jan  1 00:00:00 1970
From: Ray Jui <rjui@broadcom.com>
Subject: [PATCH v2 0/5] Add gpio support to Broadcom Cygnus SoC
Date: Mon, 8 Dec 2014 10:47:43 -0800
Message-ID: <1418064468-8512-2-git-send-email-rjui@broadcom.com>
References: <Ray Jui <rjui@broadcom.com>
 <1418064468-8512-1-git-send-email-rjui@broadcom.com>
Mime-Version: 1.0
Content-Type: text/plain
Return-path: <linux-gpio-owner@vger.kernel.org>
In-Reply-To: <1418064468-8512-1-git-send-email-rjui@broadcom.com>
Sender: linux-gpio-owner@vger.kernel.org
To: Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>, Mark Rutland <mark.rutland@arm.com>, Ian Campbell <ijc+devicetree@hellion.org.uk>, Kumar Gala <galak@codeaurora.org>, Linus Walleij <linus.walleij@linaro.org>, Alexandre Courbot <gnurou@gmail.com>, Grant Likely <grant.likely@linaro.org>, Christian Daudt <bcm@fixthebug.org>, Matt Porter <mporter@linaro.org>, Florian Fainelli <f.fainelli@gmail.com>, Russell King <linux@arm.linux.org.uk>, Joe Perches <joe@perches.com>, Arnd Bergmann <arnd@arndb.de>
Cc: Scott Branden <sbranden@broadcom.com>, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-gpio@vger.kernel.org, bcm-kernel-feedback-list@broadcom.com, devicetree@vger.kernel.org, Ray Jui <rjui@broadcom.com>
List-Id: devicetree@vger.kernel.org

This patchset contains the initial GPIO support for the Broadcom Cygnus SoC.
Cygnus has 3 GPIO controllers: 1) the ASIU GPIO; 2) the chipCommonG GPIO;
and 3) the ALWAYS-ON GPIO. All 3 types of GPIO controllers are supported by
the same Cygnus GPIO driver

Changes from v1:
 - Get rid of inline qualifier
 - Get rid of redundant check in the ISR
 - Other minor fixes to imrove code readability

Ray Jui (5):
  gpio: Cygnus: define Broadcom Cygnus GPIO binding
  gpio: Cygnus: add GPIO driver
  ARM: mach-bcm: Enable GPIO support for Cygnus
  ARM: dts: enable GPIO for Broadcom Cygnus
  MAINTAINERS: Entry for Cygnus GPIO driver

 .../devicetree/bindings/gpio/brcm,cygnus-gpio.txt  |   85 +++
 MAINTAINERS                                        |    7 +
 arch/arm/boot/dts/bcm-cygnus.dtsi                  |   30 +
 arch/arm/mach-bcm/Kconfig                          |    1 +
 drivers/gpio/Kconfig                               |   11 +
 drivers/gpio/Makefile                              |    1 +
 drivers/gpio/gpio-bcm-cygnus.c                     |  712 ++++++++++++++++++++
 7 files changed, 847 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/gpio/brcm,cygnus-gpio.txt
 create mode 100644 drivers/gpio/gpio-bcm-cygnus.c

-- 
1.7.9.5