From mboxrd@z Thu Jan  1 00:00:00 1970
From: Ray Jui <rjui@broadcom.com>
Subject: [PATCH v3 1/3] i2c: iProc: define Broadcom iProc I2C binding
Date: Tue, 9 Dec 2014 19:57:10 -0800
Message-ID: <1418183832-24793-2-git-send-email-rjui@broadcom.com>
References: <Ray Jui <rjui@broadcom.com>
 <1418183832-24793-1-git-send-email-rjui@broadcom.com>
Mime-Version: 1.0
Content-Type: text/plain
Return-path: <linux-kernel-owner@vger.kernel.org>
In-Reply-To: <1418183832-24793-1-git-send-email-rjui@broadcom.com>
Sender: linux-kernel-owner@vger.kernel.org
To: Wolfram Sang <wsa@the-dreams.de>, Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>, Mark Rutland <mark.rutland@arm.com>, Ian Campbell <ijc+devicetree@hellion.org.uk>, Kumar Gala <galak@codeaurora.org>, Grant Likely <grant.likely@linaro.org>, Christian Daudt <bcm@fixthebug.org>, Matt Porter <mporter@linaro.org>, Florian Fainelli <f.fainelli@gmail.com>, Russell King <linux@arm.linux.org.uk>
Cc: Scott Branden <sbranden@broadcom.com>, linux-i2c@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, bcm-kernel-feedback-list@broadcom.com, devicetree@vger.kernel.org, Ray Jui <rjui@broadcom.com>
List-Id: devicetree@vger.kernel.org

Document the I2C device tree binding for Broadcom iProc family of
SoCs

Signed-off-by: Ray Jui <rjui@broadcom.com>
Reviewed-by: Scott Branden <sbranden@broadcom.com>
---
 .../devicetree/bindings/i2c/brcm,iproc-i2c.txt     |   37 ++++++++++++++++++++
 1 file changed, 37 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/i2c/brcm,iproc-i2c.txt

diff --git a/Documentation/devicetree/bindings/i2c/brcm,iproc-i2c.txt b/Documentation/devicetree/bindings/i2c/brcm,iproc-i2c.txt
new file mode 100644
index 0000000..81f982c
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/brcm,iproc-i2c.txt
@@ -0,0 +1,37 @@
+Broadcom iProc I2C controller
+
+Required properties:
+
+- compatible:
+    Must be "brcm,iproc-i2c"
+
+- reg:
+    Define the base and range of the I/O address space that contain the iProc
+    I2C controller registers
+
+- interrupts:
+    Should contain the I2C interrupt
+
+- clock-frequency:
+    This is the I2C bus clock. Need to be either 100000 or 400000
+
+- #address-cells:
+    Always 1 (for I2C addresses)
+
+- #size-cells:
+    Always 0
+
+Example:
+	i2c0: i2c@18008000 {
+		compatible = "brcm,iproc-i2c";
+		reg = <0x18008000 0x100>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <GIC_SPI 85 IRQ_TYPE_NONE>;
+		clock-frequency = <100000>;
+
+		codec: wm8750@1a {
+			compatible = "wlf,wm8750";
+			reg = <0x1a>;
+		};
+	};
-- 
1.7.9.5