From: Eddie Huang <eddie.huang@mediatek.com>
To: Matthias Brugger <matthias.bgg@gmail.com>,
Rob Herring <robh+dt@kernel.org>,
Jason Cooper <jason@lakedaemon.net>
Cc: Mark Rutland <mark.rutland@arm.com>,
devicetree@vger.kernel.org, srv_heupstream@mediatek.com,
Pawel Moll <pawel.moll@arm.com>,
Ian Campbell <ijc+devicetree@hellion.org.uk>,
Catalin Marinas <catalin.marinas@arm.com>,
Mark Brown <broonie@linaro.org>,
Will Deacon <will.deacon@arm.com>,
linux-kernel@vger.kernel.org,
Robert Richter <rrichter@cavium.com>,
Sascha Hauer <kernel@pengutronix.de>,
Kumar Gala <galak@codeaurora.org>,
Olof Johansson <olof@lixom.net>,
"Joe.C" <yingjoe.chen@mediatek.com>,
Thomas Gleixner <tglx@linutronix.de>,
Eddie Huang <eddie.huang@mediatek.com>,
linux-arm-kernel@lists.infradead.org, yh.chen@mediatek.com
Subject: [PATCH 3/4] arm64: dts: Add mediatek MT8173 SoC and evaluation board dts and Makefile
Date: Wed, 10 Dec 2014 18:50:01 +0800 [thread overview]
Message-ID: <1418208602-35584-4-git-send-email-eddie.huang@mediatek.com> (raw)
In-Reply-To: <1418208602-35584-1-git-send-email-eddie.huang@mediatek.com>
Add device tree support for MT8173 SoC and evalutaion board based on it.
Signed-off-by: Eddie Huang <eddie.huang@mediatek.com>
---
arch/arm64/boot/dts/Makefile | 1 +
arch/arm64/boot/dts/mt8173-evb.dts | 31 +++++++
arch/arm64/boot/dts/mt8173.dtsi | 164 +++++++++++++++++++++++++++++++++++++
3 files changed, 196 insertions(+)
create mode 100644 arch/arm64/boot/dts/mt8173-evb.dts
create mode 100644 arch/arm64/boot/dts/mt8173.dtsi
diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile
index f8001a6..db7661e 100644
--- a/arch/arm64/boot/dts/Makefile
+++ b/arch/arm64/boot/dts/Makefile
@@ -1,3 +1,4 @@
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-evb.dtb
dtb-$(CONFIG_ARCH_THUNDER) += thunder-88xx.dtb
dtb-$(CONFIG_ARCH_VEXPRESS) += rtsm_ve-aemv8a.dtb foundation-v8.dtb
dtb-$(CONFIG_ARCH_XGENE) += apm-mustang.dtb
diff --git a/arch/arm64/boot/dts/mt8173-evb.dts b/arch/arm64/boot/dts/mt8173-evb.dts
new file mode 100644
index 0000000..adf26dd
--- /dev/null
+++ b/arch/arm64/boot/dts/mt8173-evb.dts
@@ -0,0 +1,31 @@
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: Eddie Huang <eddie.huang@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+#include "mt8173.dtsi"
+
+/ {
+ model = "mediatek,mt8173-evb";
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
+ };
+
+ memory {
+ reg = <0 0x40000000 0 0x40000000>;
+ };
+};
diff --git a/arch/arm64/boot/dts/mt8173.dtsi b/arch/arm64/boot/dts/mt8173.dtsi
new file mode 100644
index 0000000..1286801
--- /dev/null
+++ b/arch/arm64/boot/dts/mt8173.dtsi
@@ -0,0 +1,164 @@
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: Eddie Huang <eddie.huang@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include "skeleton.dtsi"
+
+/ {
+ compatible = "mediatek,mt8173";
+ interrupt-parent = <&sysirq>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&cpu0>;
+ };
+ core1 {
+ cpu = <&cpu1>;
+ };
+ };
+
+ cluster1 {
+ core0 {
+ cpu = <&cpu2>;
+ };
+ core1 {
+ cpu = <&cpu3>;
+ };
+ };
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x000>;
+ enable-method = "psci";
+ };
+
+ cpu1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x001>;
+ enable-method = "psci";
+ };
+
+ cpu2: cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57";
+ reg = <0x100>;
+ enable-method = "psci";
+ };
+
+ cpu3: cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57";
+ reg = <0x101>;
+ enable-method = "psci";
+ };
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ clocks {
+ clk26m: clk26m {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <26000000>;
+ };
+
+ clk32k: clk32k {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32000>;
+ };
+
+ uart_clk: dummy26m {
+ compatible = "fixed-clock";
+ clock-frequency = <26000000>;
+ #clock-cells = <0>;
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupt-parent = <&gic>;
+ interrupts = <1 13 0x8>,
+ <1 14 0x8>,
+ <1 11 0x8>,
+ <1 10 0x8>;
+ clock-frequency = <13000000>;
+ };
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ compatible = "simple-bus";
+ ranges;
+
+ sysirq: intpol-controller@10200620 {
+ compatible = "mediatek,mt8173-sysirq", "mediatek,mt6577-sysirq";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ interrupt-parent = <&gic>;
+ reg = <0 0x10200620 0 0x20>;
+ };
+
+ gic: interrupt-controller@10220000 {
+ compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ interrupt-parent = <&gic>;
+ interrupt-controller;
+ reg = <0 0x10221000 0 0x1000>,
+ <0 0x10222000 0 0x1000>,
+ <0 0x10200620 0 0x1000>;
+ };
+
+ uart0: serial@11002000 {
+ compatible = "mediatek,mt8173-uart","mediatek,mt6577-uart";
+ reg = <0 0x11002000 0 0x400>;
+ interrupts = <0 83 8>;
+ clocks = <&uart_clk>;
+ };
+
+ uart1: serial@11003000 {
+ compatible = "mediatek,mt8173-uart","mediatek,mt6577-uart";
+ reg = <0 0x11003000 0 0x400>;
+ interrupts = <0 84 8>;
+ clocks = <&uart_clk>;
+ };
+
+ uart2: serial@11004000 {
+ compatible = "mediatek,mt8173-uart","mediatek,mt6577-uart";
+ reg = <0 0x11004000 0 0x400>;
+ interrupts = <0 85 8>;
+ clocks = <&uart_clk>;
+ };
+
+ uart3: serial@11005000 {
+ compatible = "mediatek,mt8173-uart","mediatek,mt6577-uart";
+ reg = <0 0x11005000 0 0x400>;
+ interrupts = <0 86 8>;
+ clocks = <&uart_clk>;
+ };
+ };
+
+};
+
--
1.8.1.1.dirty
next prev parent reply other threads:[~2014-12-10 10:50 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-10 10:49 [PATCH 0/4] Add basic support for Mediatek MT8173 SoC Eddie Huang
2014-12-10 10:49 ` [PATCH 1/4] Document: DT: Add bindings for mediatek MT8173 Soc Platform Eddie Huang
2014-12-10 10:50 ` [PATCH 2/4] irqchip: mediatek: Add support for mt8173 Eddie Huang
[not found] ` <1418208602-35584-3-git-send-email-eddie.huang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
2014-12-10 11:00 ` Arnd Bergmann
2014-12-10 14:37 ` Yingjoe Chen
2014-12-10 14:41 ` Arnd Bergmann
2014-12-10 10:50 ` Eddie Huang [this message]
[not found] ` <1418208602-35584-4-git-send-email-eddie.huang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
2014-12-10 14:27 ` [PATCH 3/4] arm64: dts: Add mediatek MT8173 SoC and evaluation board dts and Makefile Yingjoe Chen
2014-12-10 14:50 ` Matthias Brugger
[not found] ` <CABuKBe+U22ogGBToftgaSJw6fcJmciGfa9scAkyP3g5OJSaAOA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-12-11 12:47 ` Eddie Huang
2014-12-11 13:02 ` Matthias Brugger
[not found] ` <CABuKBeLOcr_CViztHidiXFUzjJ6keJgRrLiEr997Qr34THqicQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-12-12 7:45 ` Eddie Huang
2014-12-11 18:02 ` Mark Rutland
2014-12-12 6:52 ` Sascha Hauer
[not found] ` <20141212065235.GK30369-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2014-12-15 11:28 ` Mark Rutland
2014-12-12 8:08 ` Eddie Huang
2014-12-12 16:42 ` Jason Cooper
[not found] ` <20141212164254.GK22670-u4khhh1J0LxI1Ri9qeTfzeTW4wlIGRCZ@public.gmane.org>
2014-12-15 13:32 ` Mark Rutland
2014-12-15 12:59 ` Mark Rutland
2014-12-16 8:46 ` Eddie Huang
2014-12-16 10:17 ` Mark Rutland
2014-12-10 10:50 ` [PATCH 4/4] arm64: mediatek: Add MT8173 SoC Kconfig and defconfig Eddie Huang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1418208602-35584-4-git-send-email-eddie.huang@mediatek.com \
--to=eddie.huang@mediatek.com \
--cc=broonie@linaro.org \
--cc=catalin.marinas@arm.com \
--cc=devicetree@vger.kernel.org \
--cc=galak@codeaurora.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=jason@lakedaemon.net \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=matthias.bgg@gmail.com \
--cc=olof@lixom.net \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
--cc=rrichter@cavium.com \
--cc=srv_heupstream@mediatek.com \
--cc=tglx@linutronix.de \
--cc=will.deacon@arm.com \
--cc=yh.chen@mediatek.com \
--cc=yingjoe.chen@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).