From: VishnuPatekar <vishnupatekar0510@gmail.com>
To: linux-input@vger.kernel.org, maxime.ripard@free-electrons.com,
dmitry.torokhov@gmail.com, hdegoede@redhat.com
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, robh+dt@kernel.org,
pawel.moll@arm.com, mark.rutland@arm.com,
ijc+devicetree@hellion.org.uk, galak@codeaurora.org,
linux@arm.linux.org.uk, grant.likely@linaro.org,
benh@kernel.crashing.org, msalter@redhat.com,
ralf@linux-mips.org, jdelvare@suse.de,
VishnuPatekar <vishnupatekar0510@gmail.com>
Subject: [PATCHv3 3/5] ARM: sunxi: dts: Add PS2 nodes to dtsi for A10 and A20
Date: Fri, 12 Dec 2014 23:55:46 +0530 [thread overview]
Message-ID: <1418408748-9797-4-git-send-email-vishnupatekar0510@gmail.com> (raw)
In-Reply-To: <1418408748-9797-1-git-send-email-vishnupatekar0510@gmail.com>
1) Fixup the sun4i ps/2 nodes interrupt property, sun4i interrupts take
only 1 specifier
2) dt bindings should use the compat string for the earliest version of the
hardware which has the relevant hardware block, unless there are differences,
the A10 and A20 ps2 controllers are identical, so for both sun4i-a10-ps2
should be used as compat string, update the sun7i.dtsi ps2 entries to
use the sun4i-a10-ps2 compat string.
Signed-off-by: VishnuPatekar <vishnupatekar0510@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
arch/arm/boot/dts/sun4i-a10.dtsi | 17 +++++++++++++++++
arch/arm/boot/dts/sun7i-a20.dtsi | 18 ++++++++++++++++++
2 files changed, 35 insertions(+)
diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
index 7b4099f..ef9a01c 100644
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
@@ -629,6 +629,7 @@
allwinner,drive = <0>;
allwinner,pull = <0>;
};
+
};
timer@01c20c00 {
@@ -795,5 +796,21 @@
#address-cells = <1>;
#size-cells = <0>;
};
+
+ ps20: ps2@01c2a000 {
+ compatible = "allwinner,sun4i-a10-ps2";
+ reg = <0x01c2a000 0x400>;
+ interrupts = <62>;
+ clocks = <&apb1_gates 6>;
+ status = "disabled";
+ };
+
+ ps21: ps2@01c2a400 {
+ compatible = "allwinner,sun4i-a10-ps2";
+ reg = <0x01c2a400 0x400>;
+ interrupts = <63>;
+ clocks = <&apb1_gates 7>;
+ status = "disabled";
+ };
};
};
diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index e21ce59..6ab7714 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -866,6 +866,7 @@
allwinner,drive = <0>;
allwinner,pull = <0>;
};
+
};
timer@01c20c00 {
@@ -1093,5 +1094,22 @@
#interrupt-cells = <3>;
interrupts = <1 9 0xf04>;
};
+
+ ps20: ps2@01c2a000 {
+ compatible = "allwinner,sun4i-a10-ps2";
+ reg = <0x01c2a000 0x400>;
+ interrupts = <0 62 4>;
+ clocks = <&apb1_gates 6>;
+ status = "disabled";
+ };
+
+ ps21: ps2@01c2a400 {
+ compatible = "allwinner,sun4i-a10-ps2";
+ reg = <0x01c2a400 0x400>;
+ interrupts = <0 63 4>;
+ clocks = <&apb1_gates 7>;
+ status = "disabled";
+ };
+
};
};
--
1.7.9.5
next prev parent reply other threads:[~2014-12-12 18:25 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-12 18:25 [PATCHv3 0/5] ARM:sunxi:ps2 Added support for A10/A20 ps2 controller VishnuPatekar
2014-12-12 18:25 ` [PATCHv3 1/5] sunxi:dts-bindings:input:ps2 bindings for A10/A20 ps2 VishnuPatekar
2014-12-12 18:25 ` [PATCHv3 2/5] ARM:sunxi:drivers:input Add support for A10/A20 PS2 VishnuPatekar
2014-12-14 20:37 ` Dmitry Torokhov
2014-12-23 22:28 ` Vishnu Patekar
2014-12-12 18:25 ` VishnuPatekar [this message]
2014-12-16 9:32 ` [PATCHv3 3/5] ARM: sunxi: dts: Add PS2 nodes to dtsi for A10 and A20 Maxime Ripard
2014-12-12 18:25 ` [PATCHv3 4/5] ARM: sunxi: dts: Add A10/A20 PS2 pin muxing options VishnuPatekar
2014-12-12 18:25 ` [PATCHv3 5/5] ARM: sunxi: dts: Add note ps2 pins conflict with hdmi VishnuPatekar
2014-12-13 2:06 ` Chen-Yu Tsai
2014-12-13 3:18 ` Vishnu Patekar
[not found] ` <CAEzqOZtOycU5LT8b3SHOymMpMOMExGC9PHiZ9wHtAjxR2R5+Ew-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-12-16 15:21 ` Chen-Yu Tsai
2014-12-13 11:09 ` [PATCHv3 0/5] ARM:sunxi:ps2 Added support for A10/A20 ps2 controller Hans de Goede
[not found] ` <548C1E7D.1000005-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2014-12-13 20:01 ` Vishnu Patekar
2014-12-14 9:01 ` Hans de Goede
[not found] ` <548D5207.8030004-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2014-12-15 14:13 ` Vishnu Patekar
2014-12-15 15:13 ` Hans de Goede
2014-12-15 15:41 ` Chen-Yu Tsai
2014-12-22 3:30 ` Vishnu Patekar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1418408748-9797-4-git-send-email-vishnupatekar0510@gmail.com \
--to=vishnupatekar0510@gmail.com \
--cc=benh@kernel.crashing.org \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.torokhov@gmail.com \
--cc=galak@codeaurora.org \
--cc=grant.likely@linaro.org \
--cc=hdegoede@redhat.com \
--cc=ijc+devicetree@hellion.org.uk \
--cc=jdelvare@suse.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=mark.rutland@arm.com \
--cc=maxime.ripard@free-electrons.com \
--cc=msalter@redhat.com \
--cc=pawel.moll@arm.com \
--cc=ralf@linux-mips.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).