From mboxrd@z Thu Jan 1 00:00:00 1970 From: Lee Jones Subject: [PATCH 3/8] mfd: bindings: Provide ST bindings for ST's LPC device Date: Mon, 15 Dec 2014 11:25:33 +0000 Message-ID: <1418642738-17407-4-git-send-email-lee.jones@linaro.org> References: <1418642738-17407-1-git-send-email-lee.jones@linaro.org> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <1418642738-17407-1-git-send-email-lee.jones@linaro.org> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=m.gmane.org@lists.infradead.org To: linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org Cc: a.zummo@towertech.it, kernel@stlinux.com, rtc-linux@googlegroups.com, devicetree@vger.kernel.org, wim@iguana.be, lee.jones@linaro.org, linux-watchdog@vger.kernel.org List-Id: devicetree@vger.kernel.org On current ST platforms the LPC controls a number of functions including Watchdog and Real Time Clock. This patch provides the bindings used to choose and configure the devices. Signed-off-by: Lee Jones --- Documentation/devicetree/bindings/mfd/st-lpc.txt | 36 ++++++++++++++++++++++++ 1 file changed, 36 insertions(+) create mode 100644 Documentation/devicetree/bindings/mfd/st-lpc.txt diff --git a/Documentation/devicetree/bindings/mfd/st-lpc.txt b/Documentation/devicetree/bindings/mfd/st-lpc.txt new file mode 100644 index 0000000..b13f143 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/st-lpc.txt @@ -0,0 +1,36 @@ +STMicroelectronics Low Power Controller (LPC) +============================================= + +Currently supports Watchdog OR Real Time Clock functionality. + +Required properties [common] + +- compatible : Must be one of: "st,stih407-lpc" "st,stih416-lpc" + "st,stih415-lpc" "st,stid127-lpc" +- reg : LPC registers base address + size +- interrupts : LPC interrupt line number and associated flags +- clocks : Clock used by LPC device (See: ../clock/clock-bindings.txt) +- st,lpc-mode : The LPC can run either one of two modes ST_LPC_MODE_RTC [0] or + ST_LPC_MODE_WDT [1]. One (and only one) mode must be + selected. + +Required properties [watchdog mode] + +- st,syscfg : Phandle to syscfg node used to enable watchdog and configure + CPU reset type. +- timeout-sec : Watchdog timeout in seconds + +Optional properties [watchdog mode] + +- st,warm-reset : If present reset type will be 'warm' - if not it will be cold + +Example: + lpc@fde05000 { + compatible = "st,stih416-lpc-watchdog"; + reg = <0xfde05000 0x1000>; + clocks = <&clk_s_d3_flexgen CLK_LPC_0>; + st,syscfg = <&syscfg_core>; + timeout-sec = <600>; + st,lpc-mode = ; + st,warm-reset; + }; -- 1.9.1