From: Lee Jones <lee.jones@linaro.org>
To: linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org
Cc: lee.jones@linaro.org, kernel@stlinux.com, a.zummo@towertech.it,
rtc-linux@googlegroups.com, wim@iguana.be,
linux-watchdog@vger.kernel.org, devicetree@vger.kernel.org,
David Paris <david.paris@st.com>
Subject: [PATCH 6/8] watchdog: st_wdt: Add new driver for ST's LPC Watchdog
Date: Mon, 15 Dec 2014 11:25:36 +0000 [thread overview]
Message-ID: <1418642738-17407-7-git-send-email-lee.jones@linaro.org> (raw)
In-Reply-To: <1418642738-17407-1-git-send-email-lee.jones@linaro.org>
Signed-off-by: David Paris <david.paris@st.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
drivers/watchdog/Kconfig | 13 ++
drivers/watchdog/Makefile | 1 +
drivers/watchdog/st_wdt.c | 312 ++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 326 insertions(+)
create mode 100644 drivers/watchdog/st_wdt.c
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index f57312f..5a538af 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -432,6 +432,19 @@ config SIRFSOC_WATCHDOG
Support for CSR SiRFprimaII and SiRFatlasVI watchdog. When
the watchdog triggers the system will be reset.
+config ST_WATCHDOG
+ tristate "STMicroelectronics LPC Watchdog"
+ depends on ARCH_STI
+ depends on OF
+ select WATCHDOG_CORE
+ select MFD_ST_LPC
+ help
+ Say Y here to include STMicroelectronics Low Power Controller
+ (LPC) based Watchdog timer support.
+
+ To compile this driver as a module, choose M here: the
+ module will be called st_wdt.
+
config TEGRA_WATCHDOG
tristate "Tegra watchdog"
depends on ARCH_TEGRA || COMPILE_TEST
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index 468c320..eb19937 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -57,6 +57,7 @@ obj-$(CONFIG_RETU_WATCHDOG) += retu_wdt.o
obj-$(CONFIG_BCM2835_WDT) += bcm2835_wdt.o
obj-$(CONFIG_MOXART_WDT) += moxart_wdt.o
obj-$(CONFIG_SIRFSOC_WATCHDOG) += sirfsoc_wdt.o
+obj-$(CONFIG_ST_WATCHDOG) += st_wdt.o
obj-$(CONFIG_BCM_KONA_WDT) += bcm_kona_wdt.o
obj-$(CONFIG_TEGRA_WATCHDOG) += tegra_wdt.o
diff --git a/drivers/watchdog/st_wdt.c b/drivers/watchdog/st_wdt.c
new file mode 100644
index 0000000..7e06f15
--- /dev/null
+++ b/drivers/watchdog/st_wdt.c
@@ -0,0 +1,312 @@
+/*
+ * st-wdt.c - ST's LPC Watchdog
+ *
+ * Copyright (C) 2014 STMicroelectronics -- All Rights Reserved
+ *
+ * Author: David Paris <david.paris@st.com> for STMicroelectronics
+ * Lee Jones <lee.jones@linaro.org> for STMicroelectronics
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/watchdog.h>
+
+/* Low Power Alarm */
+#define LPC_LPA_LSB_OFF 0x410
+#define LPC_LPA_START_OFF 0x418
+
+/* LPC as WDT */
+#define LPC_WDT_OFF 0x510
+
+struct st_wdog_syscfg {
+ struct regmap *regmap;
+ unsigned int reset_type_reg;
+ unsigned int reset_type_mask;
+ unsigned int enable_reg;
+ unsigned int enable_mask;
+};
+
+struct st_wdog {
+ void __iomem *base;
+ struct device *dev;
+ struct st_wdog_syscfg *syscfg;
+ struct clk *clk;
+ int warm_reset;
+};
+
+static struct st_wdog_syscfg stid127_syscfg = {
+ .reset_type_reg = 0x004,
+ .reset_type_mask = BIT(2),
+ .enable_reg = 0x000,
+ .enable_mask = BIT(2),
+};
+
+static struct st_wdog_syscfg stih415_syscfg = {
+ .reset_type_reg = 0x0B8,
+ .reset_type_mask = BIT(6),
+ .enable_reg = 0x0B4,
+ .enable_mask = BIT(7),
+};
+
+static struct st_wdog_syscfg stih416_syscfg = {
+ .reset_type_reg = 0x88C,
+ .reset_type_mask = BIT(6),
+ .enable_reg = 0x888,
+ .enable_mask = BIT(7),
+};
+
+static struct st_wdog_syscfg stih407_syscfg = {
+ .enable_reg = 0x204,
+ .enable_mask = BIT(19),
+};
+
+static struct of_device_id st_wdog_match[] = {
+ {
+ .compatible = "st,stih407-lpc",
+ .data = (void *)&stih407_syscfg,
+ },
+ {
+ .compatible = "st,stih416-lpc",
+ .data = (void *)&stih416_syscfg,
+ },
+ {
+ .compatible = "st,stih415-lpc",
+ .data = (void *)&stih415_syscfg,
+ },
+ {
+ .compatible = "st,stid127-lpc",
+ .data = (void *)&stid127_syscfg,
+ },
+ {},
+};
+MODULE_DEVICE_TABLE(of, st_wdog_match);
+
+static void st_wdog_setup(struct st_wdog *st_wdog, bool enable)
+{
+ /* Type of watchdog reset - 0: Cold 1: Warm */
+ if (st_wdog->syscfg->reset_type_reg)
+ regmap_update_bits(st_wdog->syscfg->regmap,
+ st_wdog->syscfg->reset_type_reg,
+ st_wdog->syscfg->reset_type_mask,
+ st_wdog->warm_reset);
+
+ /* Mask/unmask watchdog reset */
+ regmap_update_bits(st_wdog->syscfg->regmap,
+ st_wdog->syscfg->enable_reg,
+ st_wdog->syscfg->enable_mask,
+ enable ? 0 : st_wdog->syscfg->enable_mask);
+}
+
+static void st_wdog_load_timer(struct st_wdog *st_wdog, unsigned int timeout)
+{
+ unsigned long clkrate = clk_get_rate(st_wdog->clk);
+ unsigned int maxtimeout = 0xFFFFFFFF / clkrate;
+
+ if (timeout > maxtimeout) {
+ dev_warn(st_wdog->dev,
+ "timer overrun detected at current freq (%luHz)\n"
+ "wdog timeout set for %ds instead of requested %uis",
+ clkrate, maxtimeout, timeout);
+ timeout = maxtimeout;
+ }
+ timeout *= clkrate;
+
+ writel_relaxed(timeout, st_wdog->base + LPC_LPA_LSB_OFF);
+ writel_relaxed(1, st_wdog->base + LPC_LPA_START_OFF);
+}
+
+static int st_wdog_start(struct watchdog_device *wdd)
+{
+ struct st_wdog *st_wdog = watchdog_get_drvdata(wdd);
+
+ writel_relaxed(1, st_wdog->base + LPC_WDT_OFF);
+
+ return 0;
+}
+
+static int st_wdog_stop(struct watchdog_device *wdd)
+{
+ struct st_wdog *st_wdog = watchdog_get_drvdata(wdd);
+
+ writel_relaxed(0, st_wdog->base + LPC_WDT_OFF);
+
+ return 0;
+}
+
+static int st_wdog_set_timeout(struct watchdog_device *wdd,
+ unsigned int timeout)
+{
+ struct st_wdog *st_wdog = watchdog_get_drvdata(wdd);
+
+ wdd->timeout = timeout;
+ st_wdog_load_timer(st_wdog, timeout);
+
+ return 0;
+}
+
+static int st_wdog_keepalive(struct watchdog_device *wdd)
+{
+ struct st_wdog *st_wdog = watchdog_get_drvdata(wdd);
+
+ st_wdog_load_timer(st_wdog, wdd->timeout);
+
+ return 0;
+}
+
+static const struct watchdog_info st_wdog_info = {
+ .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
+ .identity = "ST LPC WDT",
+};
+
+static const struct watchdog_ops st_wdog_ops = {
+ .owner = THIS_MODULE,
+ .start = st_wdog_start,
+ .stop = st_wdog_stop,
+ .ping = st_wdog_keepalive,
+ .set_timeout = st_wdog_set_timeout,
+};
+
+static struct watchdog_device st_wdog_dev = {
+ .info = &st_wdog_info,
+ .ops = &st_wdog_ops,
+};
+
+static int st_wdog_probe(struct platform_device *pdev)
+{
+ const struct of_device_id *match;
+ struct device_node *np;
+ struct st_wdog *st_wdog;
+ struct regmap *regmap;
+ struct resource *res;
+ struct clk *clk;
+ void __iomem *base;
+ int ret;
+
+ /* This is a single node MFD device. */
+ np = pdev->dev.of_node = pdev->dev.parent->of_node;
+
+ st_wdog = devm_kzalloc(&pdev->dev, sizeof(*st_wdog), GFP_KERNEL);
+ if (!st_wdog)
+ return -ENOMEM;
+
+ match = of_match_device(st_wdog_match, &pdev->dev);
+ if (!match) {
+ dev_err(&pdev->dev, "Couldn't match device\n");
+ return -ENODEV;
+ }
+ st_wdog->syscfg = (struct st_wdog_syscfg *)match->data;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(base)) {
+ dev_err(&pdev->dev, "Failed to ioremap base\n");
+ return PTR_ERR(base);
+ }
+
+ regmap = syscon_regmap_lookup_by_phandle(np, "st,syscfg");
+ if (IS_ERR(regmap)) {
+ dev_err(&pdev->dev, "No syscfg phandle specified\n");
+ return PTR_ERR(regmap);
+ }
+
+ clk = clk_get(&pdev->dev, NULL);
+ if (IS_ERR(clk)) {
+ dev_err(&pdev->dev, "Unable to request clock\n");
+ return PTR_ERR(clk);
+ }
+ clk_prepare_enable(st_wdog->clk);
+
+ st_wdog->dev = &pdev->dev;
+ st_wdog->base = base;
+ st_wdog->clk = clk;
+ st_wdog->syscfg->regmap = regmap;
+ st_wdog->warm_reset = of_property_read_bool(np, "st,warm_reset");
+
+ watchdog_set_drvdata(&st_wdog_dev, st_wdog);
+ watchdog_set_nowayout(&st_wdog_dev, WATCHDOG_NOWAYOUT);
+
+ /* Init Watchdog timeout with value in DT */
+ ret = watchdog_init_timeout(&st_wdog_dev, 0, &pdev->dev);
+ if (ret) {
+ dev_err(&pdev->dev, "Unable to initialise watchdog timeout\n");
+ return ret;
+ }
+
+ ret = watchdog_register_device(&st_wdog_dev);
+ if (ret) {
+ dev_err(&pdev->dev, "Unable to register watchdog\n");
+ clk_disable_unprepare(clk);
+ return ret;
+ }
+
+ st_wdog_setup(st_wdog, true);
+
+ dev_info(&pdev->dev, "LPC Watchdog driver registered, reset type is %s",
+ st_wdog->warm_reset ? "warm" : "cold");
+
+ return ret;
+}
+
+static int st_wdog_remove(struct platform_device *pdev)
+{
+ struct st_wdog *st_wdog = watchdog_get_drvdata(&st_wdog_dev);
+
+ st_wdog_setup(st_wdog, false);
+ watchdog_unregister_device(&st_wdog_dev);
+ clk_disable_unprepare(st_wdog->clk);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int st_wdog_suspend(struct device *dev)
+{
+ if (watchdog_active(&st_wdog_dev))
+ st_wdog_stop(&st_wdog_dev);
+
+ return 0;
+}
+
+static int st_wdog_resume(struct device *dev)
+{
+ struct st_wdog *st_wdog = watchdog_get_drvdata(&st_wdog_dev);
+
+ if (watchdog_active(&st_wdog_dev)) {
+ st_wdog_load_timer(st_wdog, st_wdog_dev.timeout);
+ st_wdog_start(&st_wdog_dev);
+ }
+
+ return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(st_wdog_pm_ops,
+ st_wdog_suspend,
+ st_wdog_resume);
+
+static struct platform_driver st_wdog_driver = {
+ .driver = {
+ .name = "st-lpc-wdt",
+ .pm = &st_wdog_pm_ops,
+ },
+ .probe = st_wdog_probe,
+ .remove = st_wdog_remove,
+};
+module_platform_driver(st_wdog_driver);
+
+MODULE_AUTHOR("David Paris <david.paris@st.com>");
+MODULE_DESCRIPTION("ST LPC Watchdog Driver");
+MODULE_LICENSE("GPL v2");
--
1.9.1
next prev parent reply other threads:[~2014-12-15 11:25 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-15 11:25 [PATCH 0/8] mfd: watchdog: rtc: New driver for ST's LPC IP Lee Jones
2014-12-15 11:25 ` [PATCH 3/8] mfd: bindings: Provide ST bindings for ST's LPC device Lee Jones
2014-12-15 11:25 ` [PATCH 4/8] mfd: dt-bindings: Provide human readable defines for LPC mode choosing Lee Jones
2014-12-15 11:25 ` Lee Jones [this message]
[not found] ` <1418642738-17407-7-git-send-email-lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2014-12-15 12:29 ` [PATCH 6/8] watchdog: st_wdt: Add new driver for ST's LPC Watchdog David Paris
2014-12-15 12:52 ` David Paris
2014-12-15 14:15 ` Guenter Roeck
2014-12-15 16:23 ` Guenter Roeck
[not found] ` <1418642738-17407-1-git-send-email-lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2014-12-15 11:25 ` [PATCH 1/8] ARM: multi_v7_defconfig: Enable support " Lee Jones
2014-12-15 11:25 ` [PATCH 2/8] ARM: multi_v7_defconfig: Enable support for ST's LPC RTC Lee Jones
2014-12-15 11:25 ` [PATCH 5/8] mfd: Add ST's Low Power Controller driver Lee Jones
[not found] ` <1418642738-17407-6-git-send-email-lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2014-12-15 13:38 ` Arnd Bergmann
2014-12-15 13:50 ` Lee Jones
2014-12-15 14:06 ` Arnd Bergmann
2014-12-15 14:38 ` Lee Jones
2014-12-15 11:25 ` [PATCH 7/8] rtc: st: add new driver for ST's LPC RTC Lee Jones
[not found] ` <1418642738-17407-8-git-send-email-lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2014-12-15 12:28 ` [STLinux Kernel] " David Paris
2014-12-15 14:17 ` Guenter Roeck
2014-12-15 11:25 ` [PATCH 8/8] ARM: STi: DT: STiH407: Add Device Tree node for the LPC Lee Jones
-- strict thread matches above, loose matches on Subject: below --
2014-12-17 16:45 [PATCH v2 0/8] watchdog: rtc: New driver(s) for ST's LPC IP Lee Jones
[not found] ` <1418834727-1602-1-git-send-email-lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2014-12-17 16:45 ` [PATCH 6/8] watchdog: st_wdt: Add new driver for ST's LPC Watchdog Lee Jones
2014-12-17 18:02 ` Guenter Roeck
[not found] ` <20141217180251.GA29914-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org>
2014-12-18 8:26 ` Lee Jones
2014-12-18 16:00 ` Guenter Roeck
[not found] ` <20141218160014.GA16015-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org>
2014-12-18 17:20 ` Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1418642738-17407-7-git-send-email-lee.jones@linaro.org \
--to=lee.jones@linaro.org \
--cc=a.zummo@towertech.it \
--cc=david.paris@st.com \
--cc=devicetree@vger.kernel.org \
--cc=kernel@stlinux.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-watchdog@vger.kernel.org \
--cc=rtc-linux@googlegroups.com \
--cc=wim@iguana.be \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).