* [PATCH 1/5] ARM: AM43xx: hwmod: add VPFE hwmod entries
2014-12-18 16:24 [PATCH 0/5] ARM: am43xx: enable VPFE Lad, Prabhakar
@ 2014-12-18 16:24 ` Lad, Prabhakar
2015-01-08 0:01 ` Tony Lindgren
2015-01-20 7:18 ` Paul Walmsley
2014-12-18 16:24 ` [PATCH 2/5] ARM: dts: am4372: add VPFE DT node entries Lad, Prabhakar
` (3 subsequent siblings)
4 siblings, 2 replies; 8+ messages in thread
From: Lad, Prabhakar @ 2014-12-18 16:24 UTC (permalink / raw)
To: Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala,
Russell King, Tony Lindgren, devicetree, LAK, OMAP
Cc: LKML, Lad, Prabhakar
From: Benoit Parrot <bparrot@ti.com>
this patch adds VPFE HWMOD data for AM43xx.
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Darren Etheridge <detheridge@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
---
arch/arm/mach-omap2/omap_hwmod_43xx_data.c | 56 ++++++++++++++++++++++++++++++
arch/arm/mach-omap2/prcm43xx.h | 3 +-
2 files changed, 58 insertions(+), 1 deletion(-)
diff --git a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
index fea01aa..bd9067e 100644
--- a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
@@ -483,6 +483,44 @@ static struct omap_hwmod am43xx_dss_rfbi_hwmod = {
},
};
+static struct omap_hwmod_class_sysconfig am43xx_vpfe_sysc = {
+ .rev_offs = 0x0,
+ .sysc_offs = 0x104,
+ .sysc_flags = SYSC_HAS_MIDLEMODE | SYSC_HAS_SIDLEMODE,
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+ MSTANDBY_FORCE | MSTANDBY_SMART | MSTANDBY_NO),
+ .sysc_fields = &omap_hwmod_sysc_type2,
+};
+
+static struct omap_hwmod_class am43xx_vpfe_hwmod_class = {
+ .name = "vpfe",
+ .sysc = &am43xx_vpfe_sysc,
+};
+
+static struct omap_hwmod am43xx_vpfe0_hwmod = {
+ .name = "vpfe0",
+ .class = &am43xx_vpfe_hwmod_class,
+ .clkdm_name = "l3s_clkdm",
+ .prcm = {
+ .omap4 = {
+ .modulemode = MODULEMODE_SWCTRL,
+ .clkctrl_offs = AM43XX_CM_PER_VPFE0_CLKCTRL_OFFSET,
+ },
+ },
+};
+
+static struct omap_hwmod am43xx_vpfe1_hwmod = {
+ .name = "vpfe1",
+ .class = &am43xx_vpfe_hwmod_class,
+ .clkdm_name = "l3s_clkdm",
+ .prcm = {
+ .omap4 = {
+ .modulemode = MODULEMODE_SWCTRL,
+ .clkctrl_offs = AM43XX_CM_PER_VPFE1_CLKCTRL_OFFSET,
+ },
+ },
+};
+
/* Interfaces */
static struct omap_hwmod_ocp_if am43xx_l3_main__l4_hs = {
.master = &am33xx_l3_main_hwmod,
@@ -750,6 +788,22 @@ static struct omap_hwmod_ocp_if am43xx_l4_ls__dss_rfbi = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
+static struct omap_hwmod_ocp_if am43xx_l3__vpfe0 = {
+ .master = &am33xx_l3_main_hwmod,
+ .slave = &am43xx_vpfe0_hwmod,
+ .clk = "l3_gclk",
+ .flags = OCPIF_SWSUP_IDLE,
+ .user = OCP_USER_MPU,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l3__vpfe1 = {
+ .master = &am33xx_l3_main_hwmod,
+ .slave = &am43xx_vpfe1_hwmod,
+ .clk = "l3_gclk",
+ .flags = OCPIF_SWSUP_IDLE,
+ .user = OCP_USER_MPU,
+};
+
static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = {
&am33xx_l4_wkup__synctimer,
&am43xx_l4_ls__timer8,
@@ -848,6 +902,8 @@ static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = {
&am43xx_l4_ls__dss,
&am43xx_l4_ls__dss_dispc,
&am43xx_l4_ls__dss_rfbi,
+ &am43xx_l3__vpfe0,
+ &am43xx_l3__vpfe1,
NULL,
};
diff --git a/arch/arm/mach-omap2/prcm43xx.h b/arch/arm/mach-omap2/prcm43xx.h
index ad7b3e9..8aa4c2c 100644
--- a/arch/arm/mach-omap2/prcm43xx.h
+++ b/arch/arm/mach-omap2/prcm43xx.h
@@ -143,5 +143,6 @@
#define AM43XX_CM_PER_USB_OTG_SS1_CLKCTRL_OFFSET 0x0268
#define AM43XX_CM_PER_USBPHYOCP2SCP1_CLKCTRL_OFFSET 0x05C0
#define AM43XX_CM_PER_DSS_CLKCTRL_OFFSET 0x0a20
-
+#define AM43XX_CM_PER_VPFE0_CLKCTRL_OFFSET 0x0068
+#define AM43XX_CM_PER_VPFE1_CLKCTRL_OFFSET 0x0070
#endif
--
1.9.1
^ permalink raw reply related [flat|nested] 8+ messages in thread* Re: [PATCH 1/5] ARM: AM43xx: hwmod: add VPFE hwmod entries
2014-12-18 16:24 ` [PATCH 1/5] ARM: AM43xx: hwmod: add VPFE hwmod entries Lad, Prabhakar
@ 2015-01-08 0:01 ` Tony Lindgren
2015-01-20 7:18 ` Paul Walmsley
1 sibling, 0 replies; 8+ messages in thread
From: Tony Lindgren @ 2015-01-08 0:01 UTC (permalink / raw)
To: Lad, Prabhakar, Paul Walmsley
Cc: Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala,
Russell King, devicetree, LAK, OMAP, LKML
* Lad, Prabhakar <prabhakar.csengg@gmail.com> [141218 08:27]:
> From: Benoit Parrot <bparrot@ti.com>
>
> this patch adds VPFE HWMOD data for AM43xx.
>
> Signed-off-by: Benoit Parrot <bparrot@ti.com>
> Signed-off-by: Darren Etheridge <detheridge@ti.com>
> Signed-off-by: Felipe Balbi <balbi@ti.com>
> Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Paul probably wants to queue this, I'll pick the dts
changes.
Regards,
Tony
> ---
> arch/arm/mach-omap2/omap_hwmod_43xx_data.c | 56 ++++++++++++++++++++++++++++++
> arch/arm/mach-omap2/prcm43xx.h | 3 +-
> 2 files changed, 58 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
> index fea01aa..bd9067e 100644
> --- a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
> +++ b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
> @@ -483,6 +483,44 @@ static struct omap_hwmod am43xx_dss_rfbi_hwmod = {
> },
> };
>
> +static struct omap_hwmod_class_sysconfig am43xx_vpfe_sysc = {
> + .rev_offs = 0x0,
> + .sysc_offs = 0x104,
> + .sysc_flags = SYSC_HAS_MIDLEMODE | SYSC_HAS_SIDLEMODE,
> + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
> + MSTANDBY_FORCE | MSTANDBY_SMART | MSTANDBY_NO),
> + .sysc_fields = &omap_hwmod_sysc_type2,
> +};
> +
> +static struct omap_hwmod_class am43xx_vpfe_hwmod_class = {
> + .name = "vpfe",
> + .sysc = &am43xx_vpfe_sysc,
> +};
> +
> +static struct omap_hwmod am43xx_vpfe0_hwmod = {
> + .name = "vpfe0",
> + .class = &am43xx_vpfe_hwmod_class,
> + .clkdm_name = "l3s_clkdm",
> + .prcm = {
> + .omap4 = {
> + .modulemode = MODULEMODE_SWCTRL,
> + .clkctrl_offs = AM43XX_CM_PER_VPFE0_CLKCTRL_OFFSET,
> + },
> + },
> +};
> +
> +static struct omap_hwmod am43xx_vpfe1_hwmod = {
> + .name = "vpfe1",
> + .class = &am43xx_vpfe_hwmod_class,
> + .clkdm_name = "l3s_clkdm",
> + .prcm = {
> + .omap4 = {
> + .modulemode = MODULEMODE_SWCTRL,
> + .clkctrl_offs = AM43XX_CM_PER_VPFE1_CLKCTRL_OFFSET,
> + },
> + },
> +};
> +
> /* Interfaces */
> static struct omap_hwmod_ocp_if am43xx_l3_main__l4_hs = {
> .master = &am33xx_l3_main_hwmod,
> @@ -750,6 +788,22 @@ static struct omap_hwmod_ocp_if am43xx_l4_ls__dss_rfbi = {
> .user = OCP_USER_MPU | OCP_USER_SDMA,
> };
>
> +static struct omap_hwmod_ocp_if am43xx_l3__vpfe0 = {
> + .master = &am33xx_l3_main_hwmod,
> + .slave = &am43xx_vpfe0_hwmod,
> + .clk = "l3_gclk",
> + .flags = OCPIF_SWSUP_IDLE,
> + .user = OCP_USER_MPU,
> +};
> +
> +static struct omap_hwmod_ocp_if am43xx_l3__vpfe1 = {
> + .master = &am33xx_l3_main_hwmod,
> + .slave = &am43xx_vpfe1_hwmod,
> + .clk = "l3_gclk",
> + .flags = OCPIF_SWSUP_IDLE,
> + .user = OCP_USER_MPU,
> +};
> +
> static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = {
> &am33xx_l4_wkup__synctimer,
> &am43xx_l4_ls__timer8,
> @@ -848,6 +902,8 @@ static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = {
> &am43xx_l4_ls__dss,
> &am43xx_l4_ls__dss_dispc,
> &am43xx_l4_ls__dss_rfbi,
> + &am43xx_l3__vpfe0,
> + &am43xx_l3__vpfe1,
> NULL,
> };
>
> diff --git a/arch/arm/mach-omap2/prcm43xx.h b/arch/arm/mach-omap2/prcm43xx.h
> index ad7b3e9..8aa4c2c 100644
> --- a/arch/arm/mach-omap2/prcm43xx.h
> +++ b/arch/arm/mach-omap2/prcm43xx.h
> @@ -143,5 +143,6 @@
> #define AM43XX_CM_PER_USB_OTG_SS1_CLKCTRL_OFFSET 0x0268
> #define AM43XX_CM_PER_USBPHYOCP2SCP1_CLKCTRL_OFFSET 0x05C0
> #define AM43XX_CM_PER_DSS_CLKCTRL_OFFSET 0x0a20
> -
> +#define AM43XX_CM_PER_VPFE0_CLKCTRL_OFFSET 0x0068
> +#define AM43XX_CM_PER_VPFE1_CLKCTRL_OFFSET 0x0070
> #endif
> --
> 1.9.1
>
^ permalink raw reply [flat|nested] 8+ messages in thread* Re: [PATCH 1/5] ARM: AM43xx: hwmod: add VPFE hwmod entries
2014-12-18 16:24 ` [PATCH 1/5] ARM: AM43xx: hwmod: add VPFE hwmod entries Lad, Prabhakar
2015-01-08 0:01 ` Tony Lindgren
@ 2015-01-20 7:18 ` Paul Walmsley
1 sibling, 0 replies; 8+ messages in thread
From: Paul Walmsley @ 2015-01-20 7:18 UTC (permalink / raw)
To: Lad, Prabhakar, bparrot, detheridge, balbi
Cc: Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala,
Russell King, Tony Lindgren, devicetree, LAK, OMAP, LKML
Hi
On Thu, 18 Dec 2014, Lad, Prabhakar wrote:
> From: Benoit Parrot <bparrot@ti.com>
>
> this patch adds VPFE HWMOD data for AM43xx.
>
> Signed-off-by: Benoit Parrot <bparrot@ti.com>
> Signed-off-by: Darren Etheridge <detheridge@ti.com>
> Signed-off-by: Felipe Balbi <balbi@ti.com>
> Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
...
> ---
> arch/arm/mach-omap2/omap_hwmod_43xx_data.c | 56 ++++++++++++++++++++++++++++++
> arch/arm/mach-omap2/prcm43xx.h | 3 +-
> 2 files changed, 58 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
> index fea01aa..bd9067e 100644
> --- a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
> +++ b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
...
> @@ -750,6 +788,22 @@ static struct omap_hwmod_ocp_if am43xx_l4_ls__dss_rfbi = {
> .user = OCP_USER_MPU | OCP_USER_SDMA,
> };
>
> +static struct omap_hwmod_ocp_if am43xx_l3__vpfe0 = {
> + .master = &am33xx_l3_main_hwmod,
> + .slave = &am43xx_vpfe0_hwmod,
> + .clk = "l3_gclk",
> + .flags = OCPIF_SWSUP_IDLE,
> + .user = OCP_USER_MPU,
> +};
> +
> +static struct omap_hwmod_ocp_if am43xx_l3__vpfe1 = {
> + .master = &am33xx_l3_main_hwmod,
> + .slave = &am43xx_vpfe1_hwmod,
> + .clk = "l3_gclk",
> + .flags = OCPIF_SWSUP_IDLE,
> + .user = OCP_USER_MPU,
> +};
> +
> static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = {
> &am33xx_l4_wkup__synctimer,
> &am43xx_l4_ls__timer8,
> @@ -848,6 +902,8 @@ static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = {
> &am43xx_l4_ls__dss,
> &am43xx_l4_ls__dss_dispc,
> &am43xx_l4_ls__dss_rfbi,
> + &am43xx_l3__vpfe0,
> + &am43xx_l3__vpfe1,
> NULL,
> };
According to SPRUHL7 Figure 14-1 "VPFE Integration" and Table 14-2 "VPFE
Connectivity Attributes", a VPFE has two interconnect ports per instance:
one L4-Per port as a register target, and one L3 port as a DMA initiator.
It's unclear to me whether the L3 port can also serve as a register
target, but Section 2.1 "ARM Cortex-A9 Memory Map", Table 4-1 "L3
Master-Slave Connectivity", and Figure 4-2 "L4 Topology" suggest that it
cannot.
So if that's correct, there should be two more struct omap_hwmod_ocp_if
records added in this patch for the register target ports that are
connected to the L4. DSS is a good example: see am43xx_dss__l3_main and
am43xx_l4_ls__dss in this same file.
- Paul
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH 2/5] ARM: dts: am4372: add VPFE DT node entries
2014-12-18 16:24 [PATCH 0/5] ARM: am43xx: enable VPFE Lad, Prabhakar
2014-12-18 16:24 ` [PATCH 1/5] ARM: AM43xx: hwmod: add VPFE hwmod entries Lad, Prabhakar
@ 2014-12-18 16:24 ` Lad, Prabhakar
2014-12-18 16:24 ` [PATCH 3/5] ARM: dts: am43x-epos-evm: add VPFE device tree data Lad, Prabhakar
` (2 subsequent siblings)
4 siblings, 0 replies; 8+ messages in thread
From: Lad, Prabhakar @ 2014-12-18 16:24 UTC (permalink / raw)
To: Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala,
Russell King, Tony Lindgren, devicetree, LAK, OMAP
Cc: LKML, Lad, Prabhakar
From: Benoit Parrot <bparrot@ti.com>
Add Video Processing Front End (VPFE) device tree
nodes for AM34xx family of devices.
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Darren Etheridge <detheridge@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
---
arch/arm/boot/dts/am4372.dtsi | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index 46660ff..dbd52fd 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -896,6 +896,22 @@
compatible = "mmio-sram";
reg = <0x40300000 0x40000>; /* 256k */
};
+
+ vpfe0: vpfe@48326000 {
+ compatible = "ti,am437x-vpfe";
+ reg = <0x48326000 0x2000>;
+ interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+ ti,hwmods = "vpfe0";
+ status = "disabled";
+ };
+
+ vpfe1: vpfe@48328000 {
+ compatible = "ti,am437x-vpfe";
+ reg = <0x48328000 0x2000>;
+ interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+ ti,hwmods = "vpfe1";
+ status = "disabled";
+ };
};
};
--
1.9.1
^ permalink raw reply related [flat|nested] 8+ messages in thread* [PATCH 3/5] ARM: dts: am43x-epos-evm: add VPFE device tree data
2014-12-18 16:24 [PATCH 0/5] ARM: am43xx: enable VPFE Lad, Prabhakar
2014-12-18 16:24 ` [PATCH 1/5] ARM: AM43xx: hwmod: add VPFE hwmod entries Lad, Prabhakar
2014-12-18 16:24 ` [PATCH 2/5] ARM: dts: am4372: add VPFE DT node entries Lad, Prabhakar
@ 2014-12-18 16:24 ` Lad, Prabhakar
2014-12-18 16:24 ` [PATCH 4/5] ARM: dts: am437x-sk-evm: " Lad, Prabhakar
2014-12-18 16:24 ` [PATCH 5/5] ARM: dts: am437x-gp-evm: " Lad, Prabhakar
4 siblings, 0 replies; 8+ messages in thread
From: Lad, Prabhakar @ 2014-12-18 16:24 UTC (permalink / raw)
To: Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala,
Russell King, Tony Lindgren, devicetree, LAK, OMAP
Cc: LKML, Lad, Prabhakar
From: Benoit Parrot <bparrot@ti.com>
Add device tree nodes and pinmux entries for Video Processing
Front End (VPFE) on am43x epos evm.
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Darren Etheridge <detheridge@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
---
arch/arm/boot/dts/am43x-epos-evm.dts | 53 ++++++++++++++++++++++++++++++++++++
1 file changed, 53 insertions(+)
diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts
index ac3e485..6a43801 100644
--- a/arch/arm/boot/dts/am43x-epos-evm.dts
+++ b/arch/arm/boot/dts/am43x-epos-evm.dts
@@ -243,6 +243,42 @@
0x08C (PIN_OUTPUT_PULLUP | MUX_MODE7)
>;
};
+
+ vpfe1_pins_default: vpfe1_pins_default {
+ pinctrl-single,pins = <
+ 0x1cc (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data9 mode 0 */
+ 0x1d0 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data8 mode 0 */
+ 0x1d4 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_hd mode 0 */
+ 0x1d8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_vd mode 0 */
+ 0x1dc (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_pclk mode 0 */
+ 0x1e8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data0 mode 0 */
+ 0x1ec (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data1 mode 0 */
+ 0x1f0 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data2 mode 0 */
+ 0x1f4 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data3 mode 0 */
+ 0x1f8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data4 mode 0 */
+ 0x1fc (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data5 mode 0 */
+ 0x200 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data6 mode 0 */
+ 0x204 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data7 mode 0 */
+ >;
+ };
+
+ vpfe1_pins_sleep: vpfe1_pins_sleep {
+ pinctrl-single,pins = <
+ 0x1cc (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ 0x1d0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ 0x1d4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ 0x1d8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ 0x1dc (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ 0x1e8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ 0x1ec (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ 0x1f0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ 0x1f4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ 0x1f8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ 0x1fc (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ 0x200 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ 0x204 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ >;
+ };
};
matrix_keypad: matrix_keypad@0 {
@@ -626,3 +662,20 @@
};
};
};
+
+&vpfe1 {
+ status = "okay";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&vpfe1_pins_default>;
+ pinctrl-1 = <&vpfe1_pins_sleep>;
+
+ port {
+ vpfe1_ep: endpoint {
+ /* remote-endpoint = <&sensor>; add once we have it */
+ ti,am437x-vpfe-interface = <0>;
+ bus-width = <8>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ };
+ };
+};
--
1.9.1
^ permalink raw reply related [flat|nested] 8+ messages in thread* [PATCH 4/5] ARM: dts: am437x-sk-evm: add VPFE device tree data
2014-12-18 16:24 [PATCH 0/5] ARM: am43xx: enable VPFE Lad, Prabhakar
` (2 preceding siblings ...)
2014-12-18 16:24 ` [PATCH 3/5] ARM: dts: am43x-epos-evm: add VPFE device tree data Lad, Prabhakar
@ 2014-12-18 16:24 ` Lad, Prabhakar
2014-12-18 16:24 ` [PATCH 5/5] ARM: dts: am437x-gp-evm: " Lad, Prabhakar
4 siblings, 0 replies; 8+ messages in thread
From: Lad, Prabhakar @ 2014-12-18 16:24 UTC (permalink / raw)
To: Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala,
Russell King, Tony Lindgren, devicetree, LAK, OMAP
Cc: LKML, Lad, Prabhakar
From: Darren Etheridge <detheridge@ti.com>
Add device tree nodes and pinmux entries for Video Processing
Front End (VPFE) on am437x sk evm.
Signed-off-by: Darren Etheridge <detheridge@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
---
arch/arm/boot/dts/am437x-sk-evm.dts | 58 +++++++++++++++++++++++++++++++++++++
1 file changed, 58 insertions(+)
diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts
index 859ff3d..2f4898b 100644
--- a/arch/arm/boot/dts/am437x-sk-evm.dts
+++ b/arch/arm/boot/dts/am437x-sk-evm.dts
@@ -184,6 +184,46 @@
>;
};
+ vpfe0_pins_default: vpfe0_pins_default {
+ pinctrl-single,pins = <
+ 0x1b0 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_hd mode 0*/
+ 0x1b4 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_vd mode 0*/
+ 0x1b8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_field mode 0*/
+ 0x1bc (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_wen mode 0*/
+ 0x1c0 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_pclk mode 0*/
+ 0x1c4 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data8 mode 0*/
+ 0x1c8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data9 mode 0*/
+ 0x208 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data0 mode 0*/
+ 0x20c (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data1 mode 0*/
+ 0x210 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data2 mode 0*/
+ 0x214 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data3 mode 0*/
+ 0x218 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data4 mode 0*/
+ 0x21c (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data5 mode 0*/
+ 0x220 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data6 mode 0*/
+ 0x224 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data7 mode 0*/
+ >;
+ };
+
+ vpfe0_pins_sleep: vpfe0_pins_sleep {
+ pinctrl-single,pins = <
+ 0x1b0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ 0x1b4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ 0x1b8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ 0x1bc (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ 0x1c0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ 0x1c4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ 0x1c8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ 0x208 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ 0x20c (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ 0x210 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ 0x214 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ 0x218 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ 0x21c (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ 0x220 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ 0x224 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ >;
+ };
+
cpsw_default: cpsw_default {
pinctrl-single,pins = <
/* Slave 1 */
@@ -611,3 +651,21 @@
&wdt {
status = "okay";
};
+
+&vpfe0 {
+ status = "okay";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&vpfe0_pins_default>;
+ pinctrl-1 = <&vpfe0_pins_sleep>;
+
+ /* Camera port */
+ port {
+ vpfe0_ep: endpoint {
+ /* remote-endpoint = <&sensor>; add once we have it */
+ ti,am437x-vpfe-interface = <0>;
+ bus-width = <8>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ };
+ };
+};
--
1.9.1
^ permalink raw reply related [flat|nested] 8+ messages in thread* [PATCH 5/5] ARM: dts: am437x-gp-evm: add VPFE device tree data
2014-12-18 16:24 [PATCH 0/5] ARM: am43xx: enable VPFE Lad, Prabhakar
` (3 preceding siblings ...)
2014-12-18 16:24 ` [PATCH 4/5] ARM: dts: am437x-sk-evm: " Lad, Prabhakar
@ 2014-12-18 16:24 ` Lad, Prabhakar
4 siblings, 0 replies; 8+ messages in thread
From: Lad, Prabhakar @ 2014-12-18 16:24 UTC (permalink / raw)
To: Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala,
Russell King, Tony Lindgren, devicetree, LAK, OMAP
Cc: LKML, Lad, Prabhakar
From: Benoit Parrot <bparrot@ti.com>
Add device tree nodes and pinmux entries for Video Processing
Front End (VPFE) on am437x gp evm.
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
---
arch/arm/boot/dts/am437x-gp-evm.dts | 106 ++++++++++++++++++++++++++++++++++++
1 file changed, 106 insertions(+)
diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
index e7ac47f..be2d285 100644
--- a/arch/arm/boot/dts/am437x-gp-evm.dts
+++ b/arch/arm/boot/dts/am437x-gp-evm.dts
@@ -254,6 +254,78 @@
0x238 (PIN_OUTPUT_PULLUP | MUX_MODE7)
>;
};
+
+ vpfe0_pins_default: vpfe0_pins_default {
+ pinctrl-single,pins = <
+ 0x1B0 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_hd mode 0*/
+ 0x1B4 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_vd mode 0*/
+ 0x1C0 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_pclk mode 0*/
+ 0x1C4 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data8 mode 0*/
+ 0x1C8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data9 mode 0*/
+ 0x208 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data0 mode 0*/
+ 0x20C (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data1 mode 0*/
+ 0x210 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data2 mode 0*/
+ 0x214 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data3 mode 0*/
+ 0x218 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data4 mode 0*/
+ 0x21C (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data5 mode 0*/
+ 0x220 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data6 mode 0*/
+ 0x224 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data7 mode 0*/
+ >;
+ };
+
+ vpfe0_pins_sleep: vpfe0_pins_sleep {
+ pinctrl-single,pins = <
+ 0x1B0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_hd mode 0*/
+ 0x1B4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_vd mode 0*/
+ 0x1C0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_pclk mode 0*/
+ 0x1C4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data8 mode 0*/
+ 0x1C8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data9 mode 0*/
+ 0x208 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data0 mode 0*/
+ 0x20C (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data1 mode 0*/
+ 0x210 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data2 mode 0*/
+ 0x214 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data3 mode 0*/
+ 0x218 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data4 mode 0*/
+ 0x21C (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data5 mode 0*/
+ 0x220 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data6 mode 0*/
+ 0x224 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data7 mode 0*/
+ >;
+ };
+
+ vpfe1_pins_default: vpfe1_pins_default {
+ pinctrl-single,pins = <
+ 0x1CC (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data9 mode 0*/
+ 0x1D0 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data8 mode 0*/
+ 0x1D4 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_hd mode 0*/
+ 0x1D8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_vd mode 0*/
+ 0x1DC (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_pclk mode 0*/
+ 0x1E8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data0 mode 0*/
+ 0x1EC (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data1 mode 0*/
+ 0x1F0 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data2 mode 0*/
+ 0x1F4 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data3 mode 0*/
+ 0x1F8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data4 mode 0*/
+ 0x1FC (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data5 mode 0*/
+ 0x200 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data6 mode 0*/
+ 0x204 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data7 mode 0*/
+ >;
+ };
+
+ vpfe1_pins_sleep: vpfe1_pins_sleep {
+ pinctrl-single,pins = <
+ 0x1CC (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data9 mode 0*/
+ 0x1D0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data8 mode 0*/
+ 0x1D4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_hd mode 0*/
+ 0x1D8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_vd mode 0*/
+ 0x1DC (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_pclk mode 0*/
+ 0x1E8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data0 mode 0*/
+ 0x1EC (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data1 mode 0*/
+ 0x1F0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data2 mode 0*/
+ 0x1F4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data3 mode 0*/
+ 0x1F8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data4 mode 0*/
+ 0x1FC (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data5 mode 0*/
+ 0x200 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data6 mode 0*/
+ 0x204 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data7 mode 0*/
+ >;
+ };
};
&i2c0 {
@@ -511,3 +583,37 @@
};
};
};
+
+&vpfe0 {
+ status = "okay";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&vpfe0_pins_default>;
+ pinctrl-1 = <&vpfe0_pins_sleep>;
+
+ port {
+ vpfe0_ep: endpoint {
+ /* remote-endpoint = <&sensor>; add once we have it */
+ ti,am437x-vpfe-interface = <0>;
+ bus-width = <8>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ };
+ };
+};
+
+&vpfe1 {
+ status = "okay";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&vpfe1_pins_default>;
+ pinctrl-1 = <&vpfe1_pins_sleep>;
+
+ port {
+ vpfe1_ep: endpoint {
+ /* remote-endpoint = <&sensor>; add once we have it */
+ ti,am437x-vpfe-interface = <0>;
+ bus-width = <8>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ };
+ };
+};
--
1.9.1
^ permalink raw reply related [flat|nested] 8+ messages in thread