From: Liu Ying <Ying.Liu@freescale.com>
To: dri-devel@lists.freedesktop.org
Cc: stefan.wahren@i2se.com, devicetree@vger.kernel.org,
linux@arm.linux.org.uk, kernel@pengutronix.de,
linux-kernel@vger.kernel.org, a.hajda@samsung.com,
mturquette@linaro.org, linux-arm-kernel@lists.infradead.org,
andyshrk@gmail.com
Subject: [PATCH RFC v8 19/21] ARM: imx_v6_v7_defconfig: Cleanup for imx drm being moved out of staging
Date: Wed, 31 Dec 2014 16:23:37 +0800 [thread overview]
Message-ID: <1420014219-915-20-git-send-email-Ying.Liu@freescale.com> (raw)
In-Reply-To: <1420014219-915-1-git-send-email-Ying.Liu@freescale.com>
The new imx_v6_v7_defconfig is generated in this way:
* make ARCH=arm imx_v6_v7_defconfig
* make ARCH=arm savedefconfig
* cp defconfig arch/arm/configs/imx_v6_v7_defconfig
Signed-off-by: Liu Ying <Ying.Liu@freescale.com>
---
v7->v8:
* None.
v6->v7:
* None.
v5->v6:
* None.
v4->v5:
* None.
v3->v4:
* None.
v2->v3:
* None.
v1->v2:
* None.
arch/arm/configs/imx_v6_v7_defconfig | 15 +++++++--------
1 file changed, 7 insertions(+), 8 deletions(-)
diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index 6790f1b..0dbd0c3 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -192,7 +192,13 @@ CONFIG_SOC_CAMERA_OV2640=y
CONFIG_IMX_IPUV3_CORE=y
CONFIG_DRM=y
CONFIG_DRM_PANEL_SIMPLE=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_DRM_IMX=y
+CONFIG_DRM_IMX_FB_HELPER=y
+CONFIG_DRM_IMX_PARALLEL_DISPLAY=y
+CONFIG_DRM_IMX_TVE=y
+CONFIG_DRM_IMX_LDB=y
+CONFIG_DRM_IMX_IPUV3=y
+CONFIG_DRM_IMX_HDMI=y
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_LCD_L4F00242T03=y
CONFIG_LCD_PLATFORM=y
@@ -249,13 +255,6 @@ CONFIG_IMX_SDMA=y
CONFIG_MXS_DMA=y
CONFIG_FSL_EDMA=y
CONFIG_STAGING=y
-CONFIG_DRM_IMX=y
-CONFIG_DRM_IMX_FB_HELPER=y
-CONFIG_DRM_IMX_PARALLEL_DISPLAY=y
-CONFIG_DRM_IMX_TVE=y
-CONFIG_DRM_IMX_LDB=y
-CONFIG_DRM_IMX_IPUV3=y
-CONFIG_DRM_IMX_HDMI=y
# CONFIG_IOMMU_SUPPORT is not set
CONFIG_PWM=y
CONFIG_PWM_IMX=y
--
2.1.0
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2014-12-31 8:23 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-31 8:23 [PATCH RFC v8 00/21] Add support for i.MX MIPI DSI DRM driver Liu Ying
2014-12-31 8:23 ` [PATCH RFC v8 01/21] clk: divider: Correct parent clk round rate if no bestdiv is normally found Liu Ying
2014-12-31 8:23 ` [PATCH RFC v8 02/21] of: Add vendor prefix for Himax Technologies Inc Liu Ying
[not found] ` <1420014219-915-3-git-send-email-Ying.Liu-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
2015-02-04 16:02 ` Rob Herring
2015-02-05 2:20 ` Liu Ying
2014-12-31 8:23 ` [PATCH RFC v8 03/21] of: Add vendor prefix for Truly Semiconductors Limited Liu Ying
2014-12-31 8:23 ` [PATCH RFC v8 04/21] ARM: imx6q: Add GPR3 MIPI muxing control register field shift bits definition Liu Ying
2014-12-31 8:23 ` [PATCH RFC v8 05/21] ARM: imx6q: clk: Add the video_27m clock Liu Ying
2014-12-31 8:23 ` [PATCH RFC v8 06/21] ARM: imx6q: clk: Change hdmi_isfr clock's parent to be " Liu Ying
2014-12-31 8:23 ` [PATCH RFC v8 07/21] ARM: imx6q: clk: Change hsi_tx clock to be a shared clock gate Liu Ying
2014-12-31 8:23 ` [PATCH RFC v8 08/21] ARM: imx6q: clk: Add support for mipi_core_cfg clock as " Liu Ying
2014-12-31 8:23 ` [PATCH RFC v8 09/21] ARM: dts: imx6qdl: Move existing MIPI DSI ports into a new 'ports' node Liu Ying
2014-12-31 8:23 ` [PATCH RFC v8 10/21] drm/dsi: Add a helper to get bits per pixel of MIPI DSI pixel format Liu Ying
2014-12-31 8:23 ` [PATCH RFC v8 11/21] Documentation: dt-bindings: Add bindings for Synopsys DW MIPI DSI DRM bridge driver Liu Ying
2015-02-05 10:10 ` Philipp Zabel
2015-02-06 8:13 ` Liu Ying
2015-02-11 7:21 ` Liu Ying
2015-02-11 13:00 ` Philipp Zabel
2015-02-11 14:09 ` Liu Ying
2015-02-11 15:23 ` Philipp Zabel
2015-02-12 2:14 ` Liu Ying
2014-12-31 8:23 ` [PATCH RFC v8 12/21] drm/bridge: Add Synopsys DesignWare MIPI DSI host controller driver Liu Ying
2014-12-31 8:23 ` [PATCH RFC v8 13/21] Documentation: dt-bindings: Add bindings for i.MX specific Synopsys DW MIPI DSI driver Liu Ying
2014-12-31 8:23 ` [PATCH RFC v8 14/21] drm: imx: Support Synopsys DesignWare MIPI DSI host controller Liu Ying
2014-12-31 8:23 ` [PATCH RFC v8 15/21] Documentation: dt-bindings: Add bindings for Himax HX8369A DRM panel driver Liu Ying
2014-12-31 8:23 ` [PATCH RFC v8 16/21] drm: panel: Add support for Himax HX8369A MIPI DSI panel Liu Ying
2014-12-31 8:23 ` [PATCH RFC v8 17/21] ARM: dtsi: imx6qdl: Add support for MIPI DSI host controller Liu Ying
2014-12-31 8:23 ` [PATCH RFC v8 18/21] ARM: dts: imx6qdl-sabresd: Add support for TRULY TFT480800-16-E MIPI DSI panel Liu Ying
2014-12-31 8:23 ` Liu Ying [this message]
2014-12-31 8:23 ` [PATCH RFC v8 20/21] ARM: imx_v6_v7_defconfig: Add support for MIPI DSI host controller Liu Ying
2014-12-31 8:23 ` [PATCH RFC v8 21/21] ARM: imx_v6_v7_defconfig: Add support for Himax HX8369A panel Liu Ying
[not found] ` <1420014219-915-1-git-send-email-Ying.Liu-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
2015-02-02 2:17 ` [PATCH RFC v8 00/21] Add support for i.MX MIPI DSI DRM driver Liu Ying
2015-02-02 5:34 ` Liu Ying
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1420014219-915-20-git-send-email-Ying.Liu@freescale.com \
--to=ying.liu@freescale.com \
--cc=a.hajda@samsung.com \
--cc=andyshrk@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=mturquette@linaro.org \
--cc=stefan.wahren@i2se.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).